Adaptive Ap Setup - Motorola AP-7131N-FGR Product Reference Manual
Hide thumbs
Also See for AP-7131N-FGR:
- Installation manual (58 pages) ,
- Installation manual (66 pages)
Table of Contents
Advertisement
Power Status
Power Mode
3af Power
3at Power
Default Radio
3. Click
Apply
to save any changes to the Power Settings screen. Navigating away from the
screen without clicking the Apply button results in all changes to the screen being lost.
4. Click
Undo Changes
settings displayed on the Power Settings screen to the last saved configuration.
5. Click
Logout
logout before the applet is closed.
4.3 Adaptive AP Setup
An access point needs settings defined to discover (and adopt) an available switch and establish a
connection and data tunnel. It's through this switch adoption that the access point receives its
Refer to the (read only) power status field to review the power
available to the AP. For an AP-7131N-FGR model, the options are
3at, 3af or Full Power.
When the access point is powered on for the first time, the system
determines the power budget available to the access point. Using
the
Auto
setting (default setting), the access point automatically
determines the best power configuration based on the available
power budget.
If
3af
is selected, the AP assumes 12.95 watts are available. If the
mode is changed, the access point requires a reset to implement
the change.
If 3af is selected, the AP is configured assuming 12.95 watts are
available using a 3af power budget, even though there may
actually be more power available. Set the 3af Power to either
Default or Option. Changing the power option to 3af restarts the
access point in order to implement the change. The access point's
WAN port is turned off if the power mode is set to 3af.
Set the power option for 3at to either Default or Option. Changing
the power option to 3at restarts the access point in order to
implement the change. With 3at power, both Ethernet ports are
available using 1000BAST-T mode.
Define whether radio 1 or radio 2 is the default radio. If using a dual
radio access point, power is negotiated between the radios per the
defined configuration.
(if necessary) to undo any changes made. Undo Changes reverts the
to securely exit the access point applet. A prompt displays confirming the
System Configuration
4-11
Advertisement
Table of Contents
