Table of Contents
Advertisement
Adjustment Menu
Overview
Adjusts the picture, color temperature, etc.
When Adjustment is selected, the following menu is
displayed.
iAdjustment
Picture Adj
B
Color Temp Adj
B
Position Adj
B
Menu Function and Operation
Menu
Picture Adj
Auto
Auto Adjust
44
Adjustment Menu
Note
This menu is not selectable in the following cases:
• When Side by Side is set to On
• When Wipe is set to On
• When Butterfly is set to On
• When Blending is set to On
Function and operation ([
Adjusts the chroma, phase, matrix and signal level automatically and contrast, brightness,
chroma and phase to set the preset value to picture adjustment preset data.
When the item is selected, the picture adjustment preset data to be set is displayed.
To change the picture adjustment preset data to be adjusted, you can select from Preset1,
Preset2, Preset3, Preset4, Preset5 and Preset (D-Cine) in the Picture Preset menu of the
Input Configuration menu.
For information about the Input Configuration menu, see page 51.
Sets the automatic adjustment of chroma, phase, matrix and signal level.
When the item is selected, the selected preset data is displayed.
You can select this item when the composite or Y/C signal from the BKM-227W, or the analog
component or analog RGB signal from the BKM-229X is displayed.
Note
This menu is not selectable when the internal signal or captured frame is displayed.
Starts automatic adjustment. (It may take some time until the automatic adjustment is
completed.)
An external color-bar signal for the reference is necessary for automatic adjustment (page
45).
The chroma data is reset to the default setting [1000].
The phase data is reset to the default setting [000].
Note
When the analog component signal or analog RGB signal is input, adjust the picture position
in the Position Adj menu (page 50) to perform the automatic adjustment in the Auto Adjust
menu. When the picture position does not fit, the adjustment will not be performed correctly
and this may cause a malfunction.
To cancel adjustment
Press the MENU button.
]: factory setting)
- Quick Links:
- Connecting the Controller (Bkm-16R)
Hide quick links:
Advertisement
Table of Contents
