Fujitsu asyg18lfca Installation Manual
Air conditioner indoor unit wall mounted type
Hide thumbs
Also See for asyg18lfca:
- Service manual (21 pages) ,
- Design & technical manual (425 pages) ,
- Design & technical manual (413 pages)
Table of Contents
Advertisement
Quick Links
AIR CONDITIONER
INDOOR UNIT
Wall Mounted Type
INSTALLATION MANUAL
INSTALLATION MANUAL
For authorized service personnel only.
INSTALLATIONSANLEITUNG
MANUEL D'INSTALLATION
Pour le personnel agréé uniquement.
MANUAL DE INSTALACIÓN
Sólo para personal de mantenimiento autorizado.
MANUALE DI INSTALLAZIONE
Esclusivamente destinato al personale autorizzato.
ΕΓΧΕΙΡΙΔΙΟ ΕΓΚΑΤΑΣΤΑΣΗΣ
Μόνο για εξουσιοδοτημένο προσωπικό του σέρβις.
MANUAL DE INSTALAÇÃO
Apenas para técnicos de assistência autorizados.
РУКОВОДСТВО ПО УСТАНОВКЕ
Только для авторизованного обслуживающего персонала.
Sadece yetkili servis personeli içindir.
Nur für autorisiertes Fachpersonal.
MONTAJ KILAVUZU
PART NO. 9318739084
Advertisement
Table of Contents
Related Manuals for Fujitsu asyg18lfca
Summary of Contents for Fujitsu asyg18lfca
-
Page 1: Wall Mounted Type
AIR CONDITIONER INDOOR UNIT Wall Mounted Type INSTALLATION MANUAL INSTALLATION MANUAL For authorized service personnel only. INSTALLATIONSANLEITUNG Nur für autorisiertes Fachpersonal. MANUEL D'INSTALLATION Pour le personnel agréé uniquement. MANUAL DE INSTALACIÓN Sólo para personal de mantenimiento autorizado. MANUALE DI INSTALLAZIONE Esclusivamente destinato al personale autorizzato. -
Page 2: Table Of Contents
INSTALLATION MANUAL This mark indicates procedures which, if improperly performed, might possibly result in personal harm to the user, or damage to CAUTION property. PART NO. 9318739084 Read carefully all security information before use or install the air conditioner. INDOOR UNIT (Wall Mounted Type) Do not attempt to install the air conditioner or a part of the air conditioner by yourself. -
Page 3: For Authorized Service Personnel Only
2.5. Optional parts 2.3. For authorized service personnel only. Refer to each installation manual for the method of installing optional parts. WARNING Parts name Model No. Application For the air conditioner to operate satisfactorily, install it as outlined in this installation Wired Remote Controller UTY-RNN M For air conditioner operation... -
Page 4: Selecting The Mounting Position
5. SELECTING THE MOUNTING POSITION 6.2. Indoor unit piping direction Decide the mounting position with the customer as follows: The piping can be connected in the 7 directions in the fi gure. When the piping is con- (1) Install the indoor unit level on a strong wall which is not subject to vibration. nected in direction 2, 3, 4 or 5, cut along the piping groove in the side of the front (2) The inlet and outlet ports should not be obstructed : the air should be able to blow all panel with a hacksaw. -
Page 5: Forming The Drain Hose And Pipe
Alignment marks 6.5. Forming the drain hose and pipe [Rear piping, Right piping, Bottom piping] Wall hook • Install the indoor unit piping in the direction of the wall hole and bind the drain hose and bracket pipe together with vinyl tape. •... -
Page 6: Electrical Wiring
6.6.2. Bending pipes 7.2. Indoor unit wiring • If pipes are shaped by hand, be careful not to collapse them. • Do not bend the pipes in an angle more than 90°. (1) Remove the cable clamp. • When pipes are repeatedly bend or stretched, the material will harden, making it (2) Bend the end of the connection cable as shown in the fi... -
Page 7: Finishing
] 1 ] 1 8. FINISHING 9. FRONT PANEL REMOVAL AND INSTALLATION (1) Insulate between pipes. 9.1. Intake grille removal ● Insulate suction and discharge pipes separately. ● For rear, right, and bottom piping, overlap the connection pipe heat insulation and (1) Open the intake grille. -
Page 8: Test Run
10. TEST RUN 12. OPTIONAL KIT INSTALLATION (OPTION) This air conditioner can be connected with the following optional kits. Refer to each instal- WARNING lation manual for the method of installing parts. • Wired remote controller Do not turn on the power until all installation work is complete. •... -
Page 9: Front Panel, Control Box Cover And Display Case Removal
12.4. Front panel, control box cover and display case 13. FUNCTION SETTING removal Perform the “FUNCTION SETTING” according to the installation conditions using the remote controller. (1) Refer to “FRONT PANEL REMOVAL AND INSTALLATION” to remove the front panel. (2) Remove the screw then remove the control box cover. CAUTION (3) Remove the display case and connector. -
Page 10: Customer Guidance
Filter Sign External input control “Operation/Stop” mode or “Forced stop” mode can be elected. The indoor unit has a sign to inform the user that it is time to clean the fi lter. Select the time setting for the fi lter sign display interval in the table below according to the amount of (♦... -
Page 11: Error Codes
Current sensor error 15. ERROR CODES ● ● ◊ • Discharge pressure sensor If you use a wireless remote controller, the lamp on the photo detector unit will output er- ror codes by way of blinking patterns. If you use a wired remote controller, error codes will error ●...