Related Manuals for Pioneer X-CM32BTD-k/-w
Summary of Contents for Pioneer X-CM32BTD-k/-w
- Page 1 X-CM32BTD -K/-W X-CM325BTD X-CM42BTD -K/-W CD Receiver System Discover the benefits of registering your product online at http://www.pioneer.co.uk (or http://www.pioneer.eu). Operating Instructions...
-
Page 2: Operating Environment
A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. S002*_A1_En... - Page 3 (including products supported by this unit). • Pioneer is not responsible for any malfunction of the compatible Pioneer product due to communication error/malfunctions associated with your network connection and/or your connected equipment.
-
Page 4: Table Of Contents
Thank you for buying this Pioneer product. Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference. -
Page 5: Before You Start
Before you start Chapter 1: Before you start • Do not heat batteries, disassemble them, or throw them What’s in the box into flames or water. • Batteries may have different voltages, even if they are the Please confirm that the following accessories are in the box same size and shape. -
Page 6: Part Names And Functions
Part names and functions Chapter 2: Part names and functions STANDBY/ON Remote control Switches the receiver between standby and on (page 19). Input function buttons Use to select the input source to this receiver (page 19). STANDBY/ON OPEN/CLOSE iPod (X-CM42BTD only) ... -
Page 7: Speaker System
Part names and functions 10 Playback control buttons Speaker system Use to control each function after you have selected it using the input function buttons (page 19). 11 Tuner control buttons ST/MONO Use to switch the sound mode between stereo and monaural. -
Page 8: Attaching The Non-Skid Pads
Part names and functions Attaching the Non-skid pads Rotating the Speaker Badge Apply the accessory non-skid pads to the bottom surfaces of The grill frame speaker badge can be rotated. Operate as the speakers. follows. Grasp the speaker badge (1), pull forward Important (2), and turn left (3). -
Page 9: Front Panel
Part names and functions Front panel TIMER VOLUME PHONES AUDIO IN Main display Remote sensor Receives the signals from the remote control. Volume control Disc tray Use to set the listening volume (page 13). Place the disc, label side up (page 19). Volume illumination TIMER indicator Light when the power on. -
Page 10: Top Panel
Part names and functions Top panel PUSH OPEN STANDBY/ON INPUT iPod/iPhone connector port INPUT Selects the input source. (X-CM42BTD only) To connect the iPod/iPhone, press the PUSH OPEN tab Long press to change to BT STANDBY settings. (page 17). -
Page 11: Connections
Connections Chapter 3: Connections • Do not connect the supplied speakers to any amplifier CAUTION other than the one supplied with this system. • Be sure to turn off the power and unplug the power cord Connection to any other amplifier may result in from the power outlet whenever making or changing malfunction or fire. -
Page 12: Connecting Antennas
Connections Connecting antennas Plugging in • Connect the DAB/FM wire antenna as shown below. Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. • To improve reception and sound quality, connect external antennas (see Using external antennas). -
Page 13: Getting Started
Getting started Chapter 4: Getting started To turn the power on General control Press the STANDBY/ON to turn the power on. Input function After use: When the INPUT on main unit is pressed, the current function Press the STANDBY/ON to enter the power stand-by mode. will change to different mode. -
Page 14: Sound Controls
Getting started Sound controls Setting the wake-up timer Used to change the existing timer setting, or to set a new Equalizer timer. When the EQUALIZER is pressed, the current mode setting Press STANDBY/ON to turn the power on. will be displayed. To change to a different mode, press the EQUALIZER repeatedly until the desired sound mode Press and hold CLOCK/TIMER. -
Page 15: Calling The Wake-Up Timer
Getting started Calling the wake-up timer Using Headphones It can be used to re-use an existing timer setting. Connect to the jack plug of the headphones. As well as steps 1 through 3 in “Setting the When the headphones are connected, there is no sound wake-up timer”. -
Page 16: Ipod/Iphone/Ipad Playback
— iPad Air Note • Pioneer does not guarantee that this unit plays iPod/ iPhone/iPad models other than the ones specified. • Some functions may be restricted depending on the model or software version. • iPod/iPhone/iPad is licensed for reproduction of non- copyrighted materials or materials the user is legally permitted to reproduce. -
Page 17: Connecting Ipod/Iphone To The Top Panel (X-Cm42Btd Only)
iPod/iPhone/iPad playback Connecting iPod/iPhone to the top Close the iPod/iPhone connector port panel (X-CM42BTD only) (X-CM42BTD only) • While pull the PULL CLOSE knob (1), close the iPod/ Press the PUSH OPEN. iPhone/iPad connector port firmly (2). • When iPod/iPhone is not connected to the unit, close the iPod/iPhone connector port firmly. -
Page 18: Playing Ipod/Iphone
iPod/iPhone/iPad playback Set up to stand the iPod/iPhone/iPad. Playing iPad When using an iPod/iPhone Make sure the iPod/iPhone cable is aligned along the groove Connect your iPad. for it on the back of the stand that comes with the unit. If an iPad is connected when this unit is on, playback of the iPad will not begin. -
Page 19: Disc Playback
Disc playback Chapter 6: Disc playback This system can play back a standard CD, CD-R/RW in the CD CAUTION format and CD-R/RW with MP3 or WMA files, but cannot • Do not place two discs in one disc tray. record on them. Some audio CD-R and CD-RW discs may not •... -
Page 20: Advanced Cd Or Mp3/Wma Disc Playback
Disc playback Repeat play Advanced CD or MP3/WMA disc Repeat play can play one track, all tracks or a programmed sequence continuously. playback To repeat one track: Press REPEAT repeatedly until “RPT ONE” appears. Press DISPLAY FOLDER TUNE+ STANDBY/ON OPEN/CLOSE ENTER. -
Page 21: Programmed Play (Cd Or Mp3/Wma)
Disc playback Programmed play (CD or MP3/WMA) About downloading MP3/WMA You can choose up to 32 selections for playback in the order There are many music sites on the internet that you can you like. download MP3/WMA music files. Follow the instructions from the website on how to download the music files. -
Page 22: Specify The Folder To Play
Disc playback Specify the folder to play Switch the display contents Specify the folder to play, do the follwing steps. Press DISPLAY. If the title, artist and album name has been written to the file, DISPLAY TUNE+ FOLDER STANDBY/ON OPEN/CLOSE that information will be displayed. -
Page 23: Usb Playback
To repeat one track: • Pioneer does not guarantee that any file recorded on a Press REPEAT repeatedly until “RPT ONE” appears. Press USB storage device will play or that power will be ENTER. -
Page 24: Specify The Folder To Play
USB playback Specify the folder to play Playing in the desired order Specify the folder to play, do the follwing steps. (Programmed Play) Press USB, and connect the USB storage device. • This unit can play repeatedly folders stored in the USB storage device. -
Page 25: Using The Tuner
Using the tuner Chapter 8: Using the tuner To receive an FM stereo transmission: Listening to the radio broadcasts Press ST/MONO to select stereo mode and “AUTO” will be displayed. The following steps show you how to tune in to FM and DAB+ Improving poor FM reception: radio broadcasts using the automatic (search) and manual (step) tuning functions. -
Page 26: To Recall A Memorised Station
Using the tuner To recall a memorised station You can search the following program types: NEWS – News SOCIAL – Social affairs Press PRESET +/– to select the desired AFFAIRS – Current Affairs RELIGION – Programs concerning religion INFO – General Information station. -
Page 27: Information Provided By Rds
Using the tuner • If no station can be found, “NO FOUND” will appear for Note 4 seconds. • If the same station is broadcasting on different frequencies, the strongest frequency will be stored in Information provided by RDS memory. Each time the RDS DISPLAY is pressed, the display will switch •... -
Page 28: Listening To The Dab
Using the tuner After the scan: Listening to the DAB+ The stations will be stored in alphanumeric order and the first station on the list will be selected and you will hear it through the speakers. About DAB+ (Digital Audio •... -
Page 29: Changing The Information Display
Using the tuner Changing the information display DAB Frequency table (BAND III) You can switch DAB+ display information. Frequency Label Frequency Label Press the DAB DISPLAY button. Each time the button is pressed, the information display 174.928 MHz 208.064 MHz changes in the following order. -
Page 30: Other Connections
Other connections Chapter 9: Other connections Connect the rear panel LINE IN audio jacks to your auxiliary CAUTION playback component. • Before making or changing the connections, switch off the power and disconnect the power cord from the AC This unit’s rear panel outlet. -
Page 31: Bluetooth® Audio Playback
Other trademarks and trade names are those of pairing procedure on it. their respective owners. • The Bluetooth wireless technology enabled device must support A2DP profiles. • Pioneer does not guarantee proper connection and operation of this unit with all Bluetooth wireless technology enabled devices. -
Page 32: Listen To Music On The Unit From A Bluetooth Capable Device
Bluetooth® Audio playback BT STANDBY Note • The following can be done when the unit is on standby • This unit will be displayed as “X-CM32”, “X-CM325” or “X- with the BT STANDBY switched ON. CM42” on all Bluetooth capable devices that you have. •... -
Page 33: Radio Wave Caution
Bluetooth® Audio playback • If you live in a heavily populated residential area Radio wave caution (apartment, townhouse, etc.) and if your neighbor’s microwave is placed near your system, you may This unit uses a 2.4 GHz radio wave frequency, which is a experience radio wave interference. -
Page 34: Additional Information
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work. • If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. - Page 35 Additional information When a USB storage device is connected Problem Check Remedy USB storage device is not Is the USB storage device properly Connect the device securely (all the way in). recognized. connected? Is the USB storage device connected This unit does not support USB hubs. Connect the USB storage via a USB hub? device directly.
-
Page 36: Playable Discs And Formats
Additional information When the Bluetooth wireless technology device is connected or operated Problem Remedy The Bluetooth wireless technology device cannot be connected or Check that no object that emits electromagnetic waves in the 2.4 operated. GHz band (microwave oven, wireless LAN device or Bluetooth Sound from the Bluetooth wireless technology device is not emitted wireless technology apparatus) is near the unit. -
Page 37: Cautions On Use
Do not use this unit on shaggy rugs, beds, sofas, etc., or consult your nearest Pioneer authorized service center. wrapped in cloth, etc. Doing so will prevent the heat from Although lens cleaners for players are commercially dispersing, leading to damage. -
Page 38: Handling Discs
Additional information Handling discs About iPod/iPhone/iPad Storing • Always place discs in their cases and store them vertically, avoiding hot, humid places, places exposed to direct sunlight and extremely cold places. “Made for iPod” and “Made for iPhone” and “Made for iPad” •... -
Page 39: Specifications
Additional information Note Specifications • The specifications are applicable when the power supply is 230 V. • Amplifier section • Specifications and the design are subject to possible RMS Power Output: ..... . . 15 W + 15 W modifications without notice, due to improvements. - Page 40 Additional information...
- Page 41 Additional information...
- Page 42 212-0031, Japan [*] X-CM32BTD-K, X-CM32BTD-W X-CM325BTD-W X-CM42BTD-K, X-CM42BTD-W English: Dansk: Hereby, Pioneer, declares that this [*] is Undertegnede Pioneer erklærer in compliance with the essential herved, at følgende udstyr [*] requirements and other relevant overholder de væsentlige krav og provisions of Directive 1999/5/EC.
- Page 43 Português: Slovenščina: Pioneer declara que este [*] está Pioneer izjavlja, da je ta [*] v skladu z conforme com os requisitos essenciais bistvenimi zahtevami in ostalimi e outras disposições da Directiva relevantnimi določili direktive 1999/5/CE. 1999/5/ES. Čeština: Română: Pioneer tímto prohlašuje, že tento [*] je Prin prezenta, Pioneer declara ca acest ve shodě...
- Page 44 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270 K002_B3_En Printed in China <YOM200145-0018>...