Caster Wheels; Cleaning; Hardware - Husqvarna RZ3016 Operator's Manual
Hide thumbs
Also See for RZ3016:
- Operator's manual (64 pages) ,
- Parts manual (32 pages) ,
- Parts manual (32 pages)
Table of Contents
Advertisement
MAINTENANCE
Caster
Wheels
Check every 200 hours. Check that wheels rotate
freely. If wheels do not rotate freely take the unit to
your dealer for service.
Foam filled tires or solid tires will void the warranty.
Removal and installation of caster wheel
1.
Remove nut and caster bolt.
2.
Pull the wheel out of the fork and take care of the
sleeve.
3.
Reinstall in reverse order. Tighten caster bolt.
IMPORTANT INFORMATION
DO NOT add any type of tire liner or foam fill
material to the tires. Excessive loads created
by foam filled tires will cause premature
failures.
Only use O.E.M. specified tires.
/i
/
/
Caster wheels
8050-908
Cleaning
Regular cleaning and washing, especially under the
mower deck, will increase the machine's life-span.
Make it a habit to clean the machine directly after use
(after it is cooled), before the debris sticks.
Use compressed air to clean the top side of mower
deck. For cleaning the underside of the deck, use the
cleanout port.
Attach the quick connect (from the accessory packet)
to any garden hose. After mowing, snap the hose to
the cleanout port and turn on water.
Restart the mower and engage the blades to use the
spinning action to wash away debris. Make sure the
hose is away from the mower blades.
Avoid spraying water on the engine and electrical
components.
_i
Use protective
glasses when
cleaning and washing.
Clean regularly
8058-084
Hardware
Check daily. Inspect the entire machine for loose or
missing hardware.
4O
Advertisement
Table of Contents
