Page 1
Brazilian Model DVP-NS57P/NS67P Canadian Model DVP-NS64P/NS67P E Model India Model DVP-NS57P/NS67P Iran Model RMT-D175A Korea Model Malaysia Model Photo : DVP-NS28/NS38/NS39/NS47P/NS57P Mexican Model RMT-D175P/D175A DVP-NS57P Middle East Model DVP-NS57P/NS67P Pakistan, Morocco Model PX Model DVP-NS57P Saudi Arabia Model Singapore Model...
Page 2
(Y, P Power requirements: Signal format system: (DVP-NS57P:EXCEPT US, MX, E, PX, 220 – 240 V AC, 50/60 Hz PAL/NTSC (DVP-NS28/NS38/NS39/ BR, AR/NS67P:EXCEPT E, CND, BR, (DVP-NS28/NS38/NS39) NS57P: EXCEPT US, PX, MX, E, BR, AR): 120 V AC, 60 Hz AR/NS67P: SP, TH, TW, ME2, AUS, Phono jack/Y: 1.0 Vp-p, P...
Page 3
THESE COMPONENTS WITH SONY PARTS WHOSE PART CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY SUPPLEMENTS PUBLISHED BY SONY. DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P TABLE OF CONTENTS SERVICE NOTE Additional Information ..............1-16 Troubleshooting ..............1-16 Self-diagnosis Function (When letters/ Disc Removal Procedure (at POWER OFF) ..... 6E numbers appear in the display) ........1-17 Child Lock ................6E Glossary ................1-17 Tray Lock ................6E Specifications ..............
Page 5
Version Information ............. 6-3 6-5. If Con Self Diagnostic Function .......... 6-3 ELECTRICAL ADJUSTMENT 7-1. Power Supply Output Voltage Check ......... 7-1 7-2. Adjustment of Video System (DVP-NS28/NS38/NS39) ... 7-2 7-3. Adjustment of Video System Except (DVP-NS28/NS38/NS39) ........7-4 REPAIR PARTS LIST 8-1.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P SERVICE NOTE 1. DISC REMOVAL PROCEDURE (at POWER OFF) 1) Open dust cover to access to a hole insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck can in the direction of the arrow A.
• Do not use solvents such as • Keep the player and the discs away from nearest Sony dealer. benzine, thinner, commercially equipment with strong magnets, such as available cleaners, or anti-static microwave ovens, or large loudspeakers.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Notes Copyrights Index to Parts and Controls • Notes about DVD+RWs/DVD+Rs/ This product incorporates copyright DVD+Rs DL, DVD-RWs/DVD-Rs/ protection technology that is protected by DVD-Rs DL or CD-Rs/CD-RWs For more information, see the pages indicated in parentheses. U.S. patents and other intellectual property...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P List of Control Menu items Guide to the Control Menu Display Item Item Name, Function TITLE (page 32)/SCENE (page 32)/TRACK (page 32) Use the Control Menu to select a function and to view related information. Press DISPLAY Selects the title, scene, or track to be played.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P If you are connecting to a monitor, projector, or AV amplifier Step 3: Connecting the Video Cords (receiver) having component video input jacks (Y, P Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Press X/x to select the setting that AUDIO SETUP Step 5: Connecting the Power Cord matches your TV type. AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND ◆ If you have a 4:3 standard TV DIGITAL OUT: DOLBY DIGITAL: D-PCM Plug the player and TV power cords into an AC outlet.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Notes Resuming Playback From Using the DVD’s Menu Selecting “ORIGINAL” or • “MULTI-DISC RESUME” in “CUSTOM the Point Where You “PLAY LIST” in DVD-VR SETUP” must be set to “ON” (default) for this function to work (page 63). Stopped the Disc mode •...
Page 13
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Next, press X/x to select “03” under “C,” Follow step 5 for new programming. To Playing in random order (Shuffle 1 2 ( 2 7 ) PLAY then press ENTER. cancel a program, select “--” under “T,” 1 8 ( 3 4 )
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Locating a point quickly by Watching frame by frame Searching for a Title/ playing a disc in fast forward or (Slow-motion Play) Searching for a Scene Chapter/Track/Scene, fast reverse (Scan) Searching for a etc. m or M Press when the player is Particular Point on a in pause mode.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P ◆ When playing a DVD Checking the play information of Checking the information on the • T * : * : * (hours: minutes: seconds) Viewing Information About the the disc front panel display Playing time of the current title Disc •...
Dolby Digital 5.1 ch such as with built-in speakers on a stereo TV. below). Use this setting when you want to use TVS was developed by Sony to produce Rear (L/R) TVS with 2 separate speakers. surround sound for home use using just a stereo TV.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Press X/x to select the setting you Press C/c to adjust the picture Press ENTER. Sharpening the Picture contrast. want. The selected setting takes effect. To go to the next or previous picture item The default setting is underlined.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P To rotate a JPEG image Selecting an album Selecting an MP3 audio track Selecting a JPEG image file Press X/x while viewing the image. Each time you press X, the image rotates Press MENU. After step 2 of “Selecting an album,”...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P • SLOW 1: sets a duration longer than DivX video files that the player NORMAL. ® Enjoying DivX Videos can play • SLOW 2: sets a duration longer than SLOW 1. The player can play data that is recorded in About DivX Video Files Press ENTER.
If your TV is listed in the table below, set the page 72 using the number buttons. a new 4-digit password, replace the disc in the and power switch of your Sony TV with the appropriate manufacturer’s code. player and press H. When the display for entering Press X/x to select “LEVEL,”...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Press X/x to select “CUSTOM,” Press X/x to select a setting, then Setting the Display or then press ENTER. press ENTER. Settings and Adjustments Sound Track Language The Setup Display appears. The setting is selected and setup is complete.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P ◆ TRACK SELECTION (DVD VIDEO only) DOLBY Normally, select this position. Custom Settings Settings for the Sound Gives the sound track which contains the (CUSTOM SUR- Multi-channel audio signals are highest number of channels priority when you ROUND output to 2 channels for enjoying...
The disc does not start playing from the display. mp3PRO format. language for the sound track. , “MODE (MP3, JPEG)” is set to “IMAGE , Contact your Sony dealer or local beginning. (JPEG)” (page 50). , Program Play, Shuffle Play, Repeat Play, or authorized Sony service facility.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Specifications System General Laser: Semiconductor laser Power requirements: Signal format system: NTSC 120 V AC, 60 Hz Power consumption: 9 W Audio characteristics Dimensions (approx.): 430 × 43 × 206.5 mm (width/height/ Frequency response: DVD VIDEO (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)/ depth) incl.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE 4 Two Tapping Screws 6 Upper case 3 Tray Cover 5 Three Tapping Screws 1 Chassis Back 2-2. FRONT PANEL ASSEMBLY 4 Claw...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 2-5. REAR PANEL, MV-52/53/54 BOARD and IF-150 BOARD Note: (DVP-NS28/NS38/NS39 ONLY) Caution Point on the PWB IF-150 When handling IF-150 PWB avoid contact with the sharp metal edge on the top side of Vacuum Fluorescent Display (ND401). 6 FMO-008 Flat Flexible Cable...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 3-2. POWER LINE BLOCK DIAGRAM MV-52 BOARD SWITCHING REGULATOR (DVP-NS64P/NS67P) (SEE PAGE 4-25 to 4-26) (SRV1872WW) (DVP-NS28/NS38/NS39/NS57P:EXCEPT US, MX/NS67P:EXCEPT CND) DVP-NS28/NS38 (RUS ONLY) (SEE PAGE 4-41 to 4-42) MV-53 BOARD (DVP-NS28/NS38/NS39) (SRV1873UC) (DVP-NS47P/NS57P:US, MX/NS64P/NS67P:CND) (SEE PAGE 4-25 to 4-26)
TO MV-52/MV-53 AUDIO (1) (SEE PAGE 3-15 TO 3-16) SPDIF SPDIF TO MV-52/MV-53 AUDIO (1) IC103 (SEE PAGE 3-15 TO 3-16) EEPROM DVP-NS28/NS38/NS39 ONLY XMAMUTE XMAMUTE XV_MUTE RGB SEL TO MV-52 WIDE VIDEO (2) EUROVY (SEE PAGE 3-13 TO 3-14)
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 3-5. RF/SERVO BLOCK DIAGRAM MV-52/MV-53 BOARD (DVP-NS28/NS38/NS39/NS64P/NS67P) BASE UNIT (SEE PAGE 4-15 to 4-16) (DEVICE, OPTICAL MV-54 BOARD (DVP-NS47P/NS57P) KHM-313CAA/C2RP) (SEE PAGE 4-31 to 4-32) CN201 SPINDLE D04+ MOTOR D04- IN1- D03+ SLED IN2- D03- MOTOR LIMIT IN3- IN4-...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 3-7. VIDEO (2) BLOCK DIAGRAM (DVP-NS47P/NS57P/NS64P/NS67P) IC304 C/BAR PB MV-52 BOARD (DVP-NS64P/NS67P) (SEE PAGE 4-17 to 4-18) MV-54 BOARD (DVP-NS47P/NS57P) (SEE PAGE 4-33 to 4-34) XVMUTE 2.0Vp-p J301 IC304 COMBO JACK VIDEO BUFFER MV-52 SYSTEM CONTROL/ SIGNAL PROCESSOR (2)
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 3-8. AUDIO (1) BLOCK DIAGRAM (DVP-NS28/NS38/NS39/NS64P/NS67P) MV-52 BOARD (DVP-NS64P/NS67P) (SEE PAGE 4-21 to 4-22) MV-53 BOARD (DVP-NS28/NS38/NS39) (SEE PAGE 4-23 to 4-24) DVP-NS67P (AR, BR, SP, TW, ME2, AUS, IN, EA) Q413 IC405 MUTE OPTICAL D IN DIGITAL OUTPUT...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 3-10. INTERFACE CONTROL BLOCK DIAGRAM IF-150 BOARD (SEE PAGE 4-7 to 4-8) CN401 SW-10V IC407 EVER+5V 3.3V REGULATOR SYSRST SYSRST SYSTEM CONTROL XIFCS MV-52/53 EVER+3.3V (SEE PAGE 3-7 to 3-8) SYSTEM CONTROL MV-54 IC406 EVER+3.3V (SEE PAGE 3-5 to 3-6)
4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS MV-52 BOARD (DVP-NS64P/NS67P) THIS NOTE IS COMMON FOR WIRING BOARDS AND SCHEMATIC DIAGRAMS. MV-53 BOARD (DVP-NS28/NS38/NS39) (In addition to this, the necessary note is printed in each block) MV-54 BOARD (DVP-NS47P/NS57P) For printed wiring boards: •...
Page 46
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P IF-150 (INTERFACE) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. There are a few cases that the part printed on this diagram isn’t mounted in this model. IF-150 BOARD (SIDE A) MV-52 Board (SYSTEM, DRIVE, VIDEO,AUDIO, POWER)
Page 47
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-5 to 4-6 for printed wiring board of IF-150 board. IF-150 BOARD TO CN106 INTERFACE MV-52 (SEE PAGE 4-13 TO 4-14)/ MV-53 (SEE PAGE 4-13 TO 4-14)/ MV-54 (SEE PAGE 4-29 TO 4-30) -REF.NO.:1000 SERIES-...
Page 48
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P MV-52 (SYSTEM, DRIVE, VIDEO, AUDIO, POWER) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. (DVP-NS64P/NS67P) There are a few cases that the part printed on this diagram isn’t mounted in this model. MV-52 BOARD (SIDE A)
Page 49
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P MV-53 (SYSTEM, DRIVE, VIDEO, AUDIO, POWER) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. (DVP-NS28/NS38/NS39) There are a few cases that the part printed on this diagram isn’t mounted in this model. MV-53 BOARD (SIDE A)
Page 50
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-9 to 4-12 for printed wiring board of MV-52/53 board. • Refer to page 4-3 to 4-4 for waveform MV-52/53 BOARD (1/7) (DVP-NS28/NS38/NS39/NS64P/NS67P) SYSTEM -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 51
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-9 to 4-12 for printed wiring board of MV-52/53 board. • Refer to page 4-3 to 4-4 for waveform MV-52/53 BOARD (2/7) (DVP-NS28/NS38/NS39/NS64P/NS67P) DRIVE -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 52
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-9 to 4-10 for printed wiring board of MV-52 board. • Refer to page 4-3 to 4-4 for waveform MV-52 BOARD (3/7) (DVP-NS64P/NS67P) VIDEO -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 53
• Refer to page 4-11 to 4-12 for printed wiring board of MV-53 board. • Refer to page 4-3 to 4-4 for waveform MV-53 BOARD (4/7) (DVP-NS28/NS38/NS39) VIDEO -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE DVP-NS28/NS38: RUS ONLY VIDEO MV-53 (4/7) 4-19 4-20...
Page 54
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-9 to 4-10 for printed wiring board of MV-52 board. • Refer to page 4-3 to 4-4 for waveform MV-52 BOARD (5/7) (DVP-NS64P/NS67P) AUDIO -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 55
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-11 to 4-12 for printed wiring board of MV-53 board. • Refer to page 4-3 to 4-4 for waveform MV-53 BOARD (6/7) (DVP-NS28/NS38/NS39) AUDIO -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 56
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-9 to 4-12 for printed wiring board of MV-52/53 board. • Refer to page 4-3 to 4-4 for waveform MV-52/53 BOARD (7/7) (DVP-NS28/NS38/NS39/NS64P/NS67P) POWER -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 57
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P MV-54 (SYSTEM, DRIVE, VIDEO, AUDIO, POWER) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. (DVP-NS47P/NS57P) There are a few cases that the part printed on this diagram isn’t mounted in this model. MV-54 BOARD (SIDE A)
Page 58
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-27 to 4-28 for printed wiring board of MV-54 board. • Refer to page 4-3 to 4-4 for waveform MV-54 BOARD (1/5) (DVP-NS47P/NS57P) SYSTEM -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 59
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-27 to 4-28 for printed wiring board of MV-54 board. • Refer to page 4-3 to 4-4 for waveform MV-54 BOARD (2/5) (DVP-NS47P/NS57P) DRIVE -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 60
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-27 to 4-28 for printed wiring board of MV-54 board. • Refer to page 4-3 to 4-4 for waveform MV-54 BOARD (3/5) (DVP-NS47P/NS57P) VIDEO -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 61
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-27 to 4-28 for printed wiring board of MV-54 board. • Refer to page 4-3 to 4-4 for waveform MV-54 BOARD (4/5) (DVP-NS47P/NS57P) AUDIO -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
Page 62
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-27 to 4-28 for printed wiring board of MV-54 board. • Refer to page 4-3 to 4-4 for waveform MV-54 BOARD (5/5) (DVP-NS47P/NS57P) POWER -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE...
POWER BLOCK (SRV1872WW) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. (DVP-NS28/NS38/NS39/NS57P:EXCEPT US, MX/NS67P: EXCEPT There are a few cases that the part printed on this diagram isn’t mounted in this model. CND) POWER BOARD (SRV1872WW) (SIDE A)
Page 64
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-39 to 4-40 for printed wiring board of Power board. POWER BOARD POWER SUPPLY (SRV1872WW) (DVP-NS28/NS38/NS39/NS57P:EXCEPT US, MX/NS67P:EXCEPT CND) -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE EVER-10V POWER SW...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P POWER BLOCK (SRV1873UC) PRINTED WIRING BOARD For printed wiring board • : Uses unleaded solder. (DVP-NS47P/NS57P: US, MX/NS64P/NS67P: CND) There are a few cases that the part printed on this diagram isn’t mounted in this model. POWER BOARD (SRV1873UC) (SIDE A)
Page 66
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P For Schematic Diagram • Refer to page 4-43 to 4-44 for printed wiring board of Power board. POWER BOARD POWER SUPPLY (SRV1873UC) (DVP-NS47P/NS57P:US, MX/NS64P/NS67P:CND) -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE MARKED:MOUNT TABLE EVER-10V POWER SW P-CONT TO CN501...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P SECTION 5 IC PIN FUNCTION DESCRIPTION 5-1. SYSTEM CONTROL PIN FUNCTION (MV-52/53 BOARD IC101) EXCEPT (DVP-NS47P/NS57P) Pin No. Pin name Type Function AGND Ground Ground pin for analog circuitry DVDA Analog Input AC coupled input path A DVDB Analog Input...
Page 68
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Pin No. Pin name Type Function Output PU Host address bit3 Output PU Host address bit4 Output PU Host address bit5 Output PU Host address bit6 Output PU Host address bit7 Output PU Host address bit8 HA18 Output SMT, PD...
Page 69
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Pin No. Pin name Type Function 8032 external interrupt 0 (for ICE) DQM0 Output Mask for DRAM input/output byte 0 Output DRAM data bit7 Output DRAM data bit6 Output DRAM data bit5 DVDD3 Power 3.3V power pin for internal digital circuitry...
Page 70
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Pin No. Pin name Type Function Output PD,SMT Not Used xMAMUTE Output PD,SMT Main Audio Mute signal (H: Unmute, L: Mute) EUROVY (MV-53 Only) Output PD,SMT CVBS/S terminal select Output signal (H: CBVS, L: S-terminal) GPIO (MV-52 Only) Not Used...
Page 71
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Pin No. Pin name Type Function LPFIN Analog Input The negative input terminal of loop filter amplifier LPFOP Analog Output The positive Output of loop filter amplifier ADCVDD3 Power Power pin for ADC circuitry ADCVSS Ground Ground pin for ADC circuitry...
Page 72
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 5-2. SYSTEM CONTROL PIN FUNCTION (MV-54 BOARD IC101) (DVP-NS47P/NS57P ONLY) Pin No. Pin name Type Function AGND Ground Ground pin for analog circuitry DVDA Analog Input AC coupled input path A DVDB Analog Input AC coupled input path B...
Page 73
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Pin No. Pin name Type Function Output PU Host address bit 6 Output PU Host address bit 7 Output PU Host address bit 8 HA18 Output PD, SMT Host address bit 18 DVSS Ground Ground pin for internal digital circuitry...
Page 74
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Pin No. Pin name Type Function Input SMT IR control signal input INTO# In/Out PU, SMT 8032 external interrupt 0 (for ICE) DVDD3 Power 3.3V power pin for internal digital circuitry DQM0 Output Mask for DRAM input/output byte 0...
Page 75
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Pin No. Pin name Type Function DVSS Ground Ground pin for internal digital circuitry MIC (For Karaoke model only) Input Karaoke microphone detect signal (Active high) (not connected) DSEL (For Japan model only) Output SMT Interlace/progressive select output signal (H: 480i, L: 480p)
Page 76
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Pin No. Pin name Type Function RFGND Ground Ground pin for RF digital circuitry Analog Output RF offset cancellation capacitor connection Analog Output RF offset cancellation capacitor connection RFGC Analog Output RF AGC loop capacitor connection for DVD-ROM IREF...
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P SECTION 6 TEST MODE 6-1. EXECUTING IOP MEASUREMENT Wait until a hexadecimal number appear. Manual Adjust In order to execute IOP measurement, the following standard procedures must be followed. 1. Track Balance Adjust: 2. Track Gain Adjust: In standby mode, press [TOP MENU], [CLEAR], [POWER] to 3.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Error code list (10) How to Clearing Emergency code 01: Communication error (No reply from syscon) Press [TOPMENU], [CLEAR] keys in this order. 02: Syscon hung up All emergency code are cleared. 03: Power OFF request when syscon hung up Emg.
At the AC Power ON after reset of IF CON is released, while pressing with the MV-54 (DVP-NS47P/NS57P), MV-52 (DVP-NS64P/ Press - key, return to TOP MENU. NS67P) and MV-53 (DVP-NS28/NS38/NS39) board are not connected to the IF-150 board, or while pressing the key on the...
Page 80
When the Self Check mode becomes active at the AC Power ON or by key input, the test display of the following steps (1) to (4) is repeated. FLD and all ON (for 5 seconds) MODEL display (for 2 seconds) a) DVP-NS28/NS38/NS39 b) DVP-NS47P/NS57P c) DVP-NS64P/NS67P...
Page 81
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 2-3-1. FLD All ON 2-3-1-1. Transition Keys in Self Check Mode • Z key and x key on the main unit • T key on the remote commander 2-3-1-2. Operation and display In this mode, all segments of FLD turn ON.
Page 82
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 2-3-3. Remote Commander Key Name Display and Key Code Display 2-3-3-1. Transition Keys in Self Check Mode • Remote commander keys except keys transited in Self Check Mode 2-3-3-2. Operation and Display When a key on the remote commander is pressed in the Self Check Mode, the name of that key is displayed on the FLD. Aslo, the key name display and the key code display can be switched with the [DISPLAY] key on the remote commander.
Page 83
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 2-3-5. FLD Anode Test Display and SHUTTLE Click Operation Test 2-3-5-1. Transition Keys in Self Check Mode • t key on the remote commander • SHUTTLE on the remote commander during Anode Test display (This unit does not provide JOG/SHUTTLE, and therefore use another DVD remote commander having the JOG/SHUTTLE) 2-3-5-2.
Page 84
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 2-3-7. LED Test Display 2-3-7-1. Transition Keys in Self Check Mode • key on the remote commander • SHUTTLE on the remote commander during Grid Test display (This model does not provide JOG/SHUTTLE, and therefore use another DVD remote commander having the JOG/SHUTTLE) 2-3-7-2.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P SECTION 7 ELECTRICAL ADJUSTMENT This section describes procedures and instructions necessary for 7-1. POWER SUPPLY OUTPUT VOLTAGE adjusting electrical circuits in this unit. CHECK Instruments required: Mode Except standby Color monitor TV Instrument Digital multimeter Oscilloscope 1 or 2 phenomena, band width over 100 MHz, with...
(DVP-NS28/NS38/NS39) <Purpose> Checking Video Level Check S-terminal video output. If it is incorrect, pictures will not be (DVP-NS28/NS38 RUS ONLY) displayed correctly in spite of connection to the TV with a S-terminal <Purpose> cable. Checking Video Level the NTSC/PAL standard, and if not correct, the...
Page 88
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P Checking RGB Output G (RGB Mode) Checking RGB Output R (RGB Mode) <Purpose> <Purpose> This checks RGB video output G level. If it is incorrect, correct color This checks RGB video output R level. If it is incorrect, correct colors will not be remain some.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 7-3. ADJUSTMENT OF VIDEO SYSTEM Checking Component Video Output B-Y <Purpose> EXCEPT (DVP-NS28/NS38/NS39) This checks component video output B-Y. If it is incorrect, correct Checking Video Level colors will not be displayed when connected to, for instance, projector. <Purpose>...
• Color Indication of Appearance Parts KR : Korea Model VN : Vietnam Model Example: ME2 : Middle East Model KNOB, BALANCE (WHITE) . . . (RED) Parts Color Cabinet's Color 8-1-1. MAIN SECTION ns : not supplied (DVP-NS28/NS38/NS39 )
Page 91
A-1231-669-A SERVICE ASSY, MV (DVP-NS38:AEP) (DVP-NS38:AEP) A-1247-069-A SERVICE ASSY, MV (DVP-NS38:RUS) X-2159-942-1 PANEL ASSY, FRONT (BLACK) A-1231-735-A SERVICE ASSY, MV (DVP-NS39) (DVP-NS38:AEP) A-1358-463-A SERVICE ASSY, MV (DVP-NS28) X-2177-149-1 PANEL ASSY, FRONT (SILVER) (DVP-NS38:RUS) X-2177-150-1 PANEL ASSY, FRONT (BLACK) (DVP-NS38:RUS) X-2176-129-1 P ANEL ASSY, FRONT (DVP-NS39)
Page 92
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P (DVP-NS47P/NS57P ) Note : The components identified by mark dotted line with mark are critical for safety. Replace only with part number specified.
Page 94
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P (DVP-NS64P/NS67P ) Note : The components identified by mark dotted line with mark are critical for safety. Replace only with part number specified.
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P IF-150 The components identified by mark 8-2. ELECTRICAL PARTS LIST or dotted line with mark critical for safety. Replace only with part number NOTE: specified. • Due to standardization, replacements in • SEMICONDUCTORS the parts list may be different from the In each case, u: µ, for example:...
Page 112
DVP-NS28/NS38/NS39/NS47P/NS57P/NS64P/NS67P 2007G1100-1 Sony Corporation 2007.07 Home Electronics Network Company. 9-883-941-13 Published by Product Design 1 Department – 145 – 8-23...