Fujitsu M3096EX Consumable Replacement And Cleaning Instructions
Hide thumbs
Also See for M3096EX:
- Operator's manual (53 pages) ,
- Brochure & specs (2 pages) ,
- Installation procedures (3 pages)
Advertisement
Quick Links
Download this manual
See also:
Operator's Manual
Advertisement
Related Manuals for Fujitsu M3096EX
Summary of Contents for Fujitsu M3096EX
- Page 1 M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions M3096EX/GX Consumable Replacement and Cleaning Instructions CG00000-676601b...
-
Page 2: Kit Contents
M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions ontents Pad Assembly Qty 3 Pick Roller Qty 2 F1 Cleaner Isopropyl Alcohol Q-Tips Qty 1 Qty 1 100/pack Lint Free Cleaning Paper Cleaning Cloths Qty 1 10/pack Qty 2 20/pack Note: Kit contents may vary... - Page 3 M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions onsumables m3096eX/GX C onsumables Description Qty. Life Fujitsu P/N Pad Assembly 100,000 PA02201-0020 Pick Roller 200,000 PA02201-0025 Pad Assembly Pick Roller Note: NCR or Carbonless paper has chemical composition which damages the Pad and the Pick Roller. Cleaning of these items will be needed more frequently to avoid feed problems.
-
Page 4: R Eplacing The P Ad A Ssembly
M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions eplaCinG the ssembly Multiple feeds can be caused by a worn out Pad Assembly. The life span of the Pad Assembly is about 100,000 sheets or 1 year if maintained properly. If NCR or carbonless paper is used the life span may be decreased by half. - Page 5 M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions eplaCinG the ssembly Cont Note: The Pad Assembly consists of the Pad, the Pick Spring, and the Pad Holder. Pad Holder Pick Spring • If you receive only the rubber pad, replace the Pad according to the following procedure.
- Page 6 M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions eplaCinG the olleR Misfeeds can be caused by a worn Pick Roller. The life span of the Pick Rollers is about 200,000 sheets or 1 year if maintained properly. If NCR or carbonless paper is used the life span may be decreased by half.
- Page 7 M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions eplaCinG the olleR Cont • Take the new Pick Roller and place the retaining hook on the end of the shaft closest to the black sponge roller. Retaining Hook Bushing • Place the bushing that has the flat spot on the end of the roller shaft where you placed the retaining hook.
- Page 8 M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions leaninG oCations and RequenCies Location Tools Frequency Flatbed Area Cloth with F1 Cleaner Whenever Dirty Cloth with F1 Cleaner Every 5,000 Pages Pick Rollers Cloth with F1 Cleaner Every 5,000 Pages Feed Rollers...
- Page 9 M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions leaninG the latbed A dirty Document Bed or Holding Pad can cause repetitive spots, marks or unclear areas when scanning from the Flatbed. Document Cover Cloth Document Holding Pad Document Bed Neutral Cleanser or Isopropyl Alcohol •...
- Page 10 M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions leaninG the with the leaninG apeR The cleaning paper is designed to remove only loose paper dust and ink from the rollers. Use them approximately every 5,000 pages scanned. They are to be used in between the thorough cleanings of the scanner.
-
Page 11: Cleaning The Adf
M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions leaninG the Feed Roller Exit Roller Pick Spring Pick Roller ADF Lever Sheet Guide Idler Roller ADF Glass (White Reference Strip) (Feed) Using a cloth with F1 Cleaner or isopropyl alcohol, wipe the Pad in a downward direction. - Page 12 M3096EX/GX C onsuMablE EplaCEMEnt and lEaninG nstRuCtions...