Electronic Control
Cycle Selection
The following cycle descriptions are for the Wave
Touch™ and IQ Touch™ Dryers.
The IQ Touch ™ models do not feature the steam
option and the active wear preset.
Turn the cycle selector in either direction to the cycle
desired. The icon for that cycle will be illuminated. Press
on the cycle selector knob to extend it or return it flush to
the console.
To change the selection after the cycle begins, press
cancel before making another choice. Just turning the
cycle selector knob to another selection will not change
the cycle.
Auto Dry Cycles
Moisture sensing bars at the back of the dryer drum
sense the moisture level of the load as it tumbles
through the heated air. With Auto Dry cycles, the load
will automatically be dried at the selected temperature to
the desired dryness level. When the load has reached
the selected dryness level, it will continue to tumble,
unheated, during a cool down period.
Drying time varies depending on size and dampness of
load and fabric type. If the load is too small or almost
dry, the moisture sensing bars may not detect enough
moisture to continue the cycle and the cycle may end
after a few minutes. If this occurs, then select the time
dry cycle to dry such loads.
Normal
Select this cycle to dry everyday fabrics including
cottons and sheets with high temp, med high temp or
medium temp heat. All dryness levels except maximum
dry and all options including sanitize are available with
this Auto Dry cycle. If equipped with Perfect Steam™,
the add steam option is also available with this cycle.
Towels
Select this cycle to dry heavy loads such as towels
and bath mats with maximum temp, high temp or med
high temp heat. The maximum dry, more dry and normal
dry dryness levels and the gentle tumble and sanitize
options are available with this Auto Dry cycle.
3-6