hit counter script
Sony HCD-ZX10D Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. HCD-ZX10D
  6. Service manual
Sony HCD-ZX10D Service Manual

Sony HCD-ZX10D Service Manual

Dvd deck receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

QQ
3 7 63 1515 0

SERVICE MANUAL

Ver 1.0 2004.07
HCD-ZX10D is the amplifier, disc player, tape
deck and tuner section in LBT-ZX10D.
This system incorporates Dolby* Digital, Dolby Pro
Logic (II) adaptive matrix surround decoder, and the
DTS** Digital Surround System.
* Manufactured under license from Dolby
Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are
trademarks of Dolby Laboratories.
** Manufactured under license from Digital Theater
Systems, Inc.
TE
L 13942296513
"DTS" and "DTS Digital Surround" are registered
trademarks of Digital Theater Systems. Inc.
Amplifier section
The following measured at AC 120, 220, 240 V,
50/60 Hz
DIN power output (rated)
Front speakers:
Center speaker:
Surround speakers:
Continuous RMS power ouput (reference)
Front speakers:
Center speaker:
Surround speakers:
Inputs
PHONO IN (phono jacks):
MIC (phone jack):
GAME INPUT AUDIO L/R (phono jacks):
www
.
Sony Corporation
9-879-053-01
Home Audio Company
2004G0579-1
Published by Sony Engineering Corporation
© 2004.07
http://www.xiaoyu163.com
GAME INPUT VIDEO (phono jack):
VIDEO/SAT IN L/R (phono jacks):
140 + 140 watts
(6 ohms at 1 kHz, DIN)
Outputs
55 watts
PHONES (stereo phone jack):
(24 ohms at 1 kHz, DIN)
140 + 140 watts
(6 ohms at 1 kHz, DIN)
VIDEO/SAT OUT L/R (phono jacks):
180 + 180 watts
(6 ohms at 1 kHz, 10%
VIDEO OUT (phono jack):
THD)
70 watts
(24 ohms at 1 kHz, 10%
COMPONENT VIDEO OUT:
THD)
180 + 180 watts
(6 ohms at 1 kHz, 10%
THD)
S VIDEO OUT (4-pin/mini-DIN jack):
sensitivity 3 mV,
impedance 47 kOhms
sensitivity 1 mV,
impedance 10 kOhms
sensitivity 250 mV,
impedance 47 kOhms
x
ao
y
i
http://www.xiaoyu163.com
HCD-ZX10D
8
Model Name Using Similar Mechanism
DVD
DVD Mechanism Type
Section
Optical Traverse Unit Name
Tape deck
Model Name Using Similar Mechanism
Section
Tape Transport Mechanism Type
Q Q
3
6 7
1 3
SPECIFICATIONS
1 Vp-p, 75 ohms
sensitivity 250 mV/
450 mV, impedance
47 kOhms
accepts headphones of
8 ohms or more
voltage 250 mV,
impedance 1 kOhm
max. output level 1 Vp-p,
load impedance 75 ohms
Y: 1 Vp-p, 75 ohms
P
/C
: 0.7 Vp-p, 75 ohms
B
B
P
/C
: 0.7 Vp-p, 75 ohms
R
R
Y: 1 Vp-p, unbalanced,
Sync negative
C: 0.286 Vp-p load
impedance 75 ohms
u163
.
2 9
9 4
2 8
Australian Model
1 5
0 5
8
2 9
9 4
SUBWOOFER OUT (phono jack):
SPEAKERS:
FRONT L/R, SURROUND L/R:
CENTER:
Disc player section
System
Laser
Frequency response
Video color system format
– Continued on next page –
m
DVD DECK RECEIVER
co
9 9
E Model
NEW
CDM79B-DVBU64
DBU-3
HCD-GN100D
CWM43RR35
2 8
9 9
voltage 250 mV,
impedance 1 kOhm
Use only the supplied
speaker SS-ZX10D
Use only the supplied
speaker SS-CT381
Compact disc and digital
audio and video system
Semiconductor laser
(DVD: λ=650 nm,
CD: λ=780 nm)
Emission duration:
continuous
DVD (PCM 48 kHz):
2 Hz – 22 kHz (±1 dB)
CD: 2 Hz – 20 kHz
(±0.5 dB)
NTSC, PAL

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-ZX10D

Summary of Contents for Sony HCD-ZX10D

  • Page 1: Service Manual

    SERVICE MANUAL E Model Australian Model Ver 1.0 2004.07 HCD-ZX10D is the amplifier, disc player, tape deck and tuner section in LBT-ZX10D. This system incorporates Dolby* Digital, Dolby Pro Model Name Using Similar Mechanism Logic (II) adaptive matrix surround decoder, and the DTS** Digital Surround System.
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 3: Playable Discs

    HCD-ZX10D 3 7 63 1515 0 • DVD Audio discs. Playable discs Cautions when playing a disc • DVDs with a different region code. that is recorded in Multi • Progressive JPEG format files. You can playback the following discs on this Session •...

  • Page 4: Table Of Contents

    HCD-ZX10D 3 7 63 1515 0 TABLE OF CONTENTS SERVICING NOTES ..........5 7-23. PRINTED WIRING BOARD – MAIN BOARD – ............51 7-24. SCHEMATIC DIAGRAM GENERAL .............. 7 – MAIN BOARD (1/5) – ..........52 7-25. SCHEMATIC DIAGRAM DISASSEMBLY –...

  • Page 5: Servicing Notes

    HCD-ZX10D SECTION 1 3 7 63 1515 0 SERVICING NOTES NOTE OF REPLACING THE DMB07 BOARD NOTES ON HANDLING THE OPTICAL PICK-UP When replacing the DMB07 board, since the adjustment value is BLOCK OR BASE UNIT not set up correctly, “Drive Auto Adjustment” can’t be performed.
  • Page 6 HCD-ZX10D 3 7 63 1515 0 HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH TURNS OFF 2 Pull-out the disc tray. 1 Turn the gear (chuck) in the direction of arrow A . L 13942296513 DECISION TO PASS OR FAIL OF THE OPTICAL PICK-UP...

  • Page 7: General

    HCD-ZX10D SECTION 2 This section is extracted from instruction manual. GENERAL 3 7 63 1515 0 • LOCATION OF CONTROLS Main unit ALPHABETICAL ORDER SYMBOLS ?/1 (power) 1 I – Q A – D A Z e; ILLUMINATION rs ALBUM +/–...

  • Page 8: Setting The Clock

    HCD-ZX10D 3 7 63 1515 0 Setting the clock Remote control ALPHABETICAL ORDER SYMBOLS Press ?/1 to turn on the system. ?/1 (power) 1 A – E F – Z Press CLOCK/TIMER SET. nN (play) 6 ALBUM + 7 FM MODE 5 “CLOCK”...

  • Page 9: Disassembly

    HCD-ZX10D SECTION 3 DISASSEMBLY 3 7 63 1515 0 • This set can be disassembled in the order shown below. 3-1. FLOW CHART 3-2. COVER (TOP) (Page 10) 3-3. CASE (Page 10) 3-4. LOADING PANEL (Page 11) 3-5. FRONT PANEL SECTION (Page 11) 3-6.

  • Page 10: Cover (Top)

    HCD-ZX10D 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 3-2. COVER (TOP) 3 cover (top) 1 three screws (BVTP3 × 8) 2 Push the cover (top) in the direction of arrow A , and release six claws.

  • Page 11: Loading Panel

    HCD-ZX10D 3 7 63 1515 0 3-4. LOADING PANEL 2 Pull-out the tray in the direction of arrow B . 1 Rotate the gear (chuck) 3 loading panel in the direction of arrow A . 3-5. FRONT PANEL SECTION...

  • Page 12: Back Panel Section

    HCD-ZX10D 3 7 63 1515 0 3-6. BACK PANEL SECTION 2 three connectors (CN1000, 1002, 1004) 1 wire (flat type) 3 four screws (BVTP3 × 8) (11 core) (CN504) 4 VIDEO board 5 two screws (BVTP3 × 8) 1 wire (flat type)

  • Page 13: Bracket (Tr) Block

    HCD-ZX10D 3 7 63 1515 0 3-8. BRACKET (TR) BLOCK 5 three screws 7 bracket (TR) block (BVTP3 × 8) 1 wire (flat type) (29 core) (CN501) 6 two screws (BVTP3 × 8) 2 Rotate the gear (chuck) in the direction of arrow A .

  • Page 14: Optical Traverse Unit

    HCD-ZX10D 3 7 63 1515 0 3-10. OPTICAL TRAVERSE UNIT 1 two screws (BVTP3 × 8) 2 chuck assy 3 three step screws (M) 4 flexible flat cable (24 core) 5 optical traverse unit L 13942296513 3-11. RF BOARD...

  • Page 15: Tape Mechanism Deck

    HCD-ZX10D 3 7 63 1515 0 3-12. TAPE MECHANISM DECK 3 tape mechanism deck 1 five screws (BVTP2.6 × 8) 2 lead wire L 13942296513 u163 http://www.xiaoyu163.com...

  • Page 16: Test Mode

    HCD-ZX10D SECTION 4 3 7 63 1515 0 TEST MODE 5. When the [VOLUME] knob is turned counterclockwise even GC TEST MODE slightly, the sound volume decreases to its minimum and a This mode is used to check the fluorescent indicator tube, LED, message “VOLUME MIN”...
  • Page 17 HCD-ZX10D 3 7 63 1515 0 REPEAT 5 LIMIT OFF MODE CD TRAY LOCK MODE The number of repeat for disc playback is 5 times when the repeat This mode let you lock the disc tray. When this mode is activated, mode is “REPEAT ALL”.
  • Page 18 HCD-ZX10D 3 7 63 1515 0 OPERATING DVD TEST MODE DVD SECTION 0. Syscon Diagnosis DVD TEST MODE GENERAL DESCRIPTION The same contents as board detail check by serial interface can be This mode let you make diagnosis and adjustment easily by using checked from the remote commander operation.
  • Page 19 HCD-ZX10D 3 7 63 1515 0 General Description of Checking Method 1. Drive Auto Adjustment Selecting 2 and subsequent items call the submenu screen of each On the Test Mode Menu screen, press the [1] key on the remote item.
  • Page 20 HCD-ZX10D 3 7 63 1515 0 1-1. DVD-SL (single layer) 1-2. CD Press the [1] key on the remote commander and insert a DVD single Press the [2] key on the remote commander and insert a CD disc layer disc following the message. Then the adjustment will be made following the message.
  • Page 21 HCD-ZX10D 3 7 63 1515 0 1-3. DVD-DL (dual layer) 2. Drive Manual Operation Press the key on the remote commander and insert a DVD dual Note: This mode is used for design, and not used in service fundamentally.
  • Page 22 HCD-ZX10D 3 7 63 1515 0 2-1. Disc Type 2-1-3. Disc Type CD It sets up so that it may judge as a disc type of specification of the Disc Type disc with which the set was inserted. [1]: CD disc (normal speed, 12 cm)
  • Page 23 HCD-ZX10D 3 7 63 1515 0 2-3. Track/Layer Jump 2-5. EEPROM Write Adjust Track/Layer Jump EEPROM Write Adjust 1. Focus Offset 3.500Tj Fine 2. Focus Gain 4.500Tj Fine 3. Trk. Offset Coarse 5.10kTj Dirc 4. ------------ 6.10kTj Dirc 5. Trk.
  • Page 24 HCD-ZX10D 3 7 63 1515 0 2-7. Disc Check Memory 3. Mecha Aging On the Test Mode Menu screen, selecting [3] executes the aging of Disc Check Memory the mechanism deck. 1. SL Disc check ### Aging Test MENU ### 2.
  • Page 25 HCD-ZX10D 3 7 63 1515 0 4. Emergency History 5. Mecha Error History On the Test Mode Menu screen, selecting [4] displays the On the Test Mode Menu screen, selecting [5] displays the information such as servo emergency history. The history information of mechanism deck error history.
  • Page 26 HCD-ZX10D 3 7 63 1515 0 6. Version Information On the Test Mode Menu screen, selecting [6] displays the ROM version and region code. The parenthesized hexadecimal number in version field is checksum value of ROM. ## Version Information ## IF con.

  • Page 27: Mechanical Adjustments

    HCD-ZX10D SECTION 5 SECTION 6 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS 3 7 63 1515 0 PRECAUTION DECK SECTION 0 dB=0.775 V 1. Clean the following parts with a denatured alcohol-moistened swab: 1. Demagnetize the record/playback head with a head record/playback heads pinch rollers demagnetizer.
  • Page 28 HCD-ZX10D 3 7 63 1515 0 2. Turn the adjustment screw and check output peaks. If the peaks DVD SECTION do not match for L-CH and R-CH, turn the adjustment screw About the dicision to pass or fail of the optical pick-up block, refer so that outputs match within 1dB of peak.

  • Page 29: Diagrams

    HCD-ZX10D SECTION 7 3 7 6 3 1 5 1 5 0 DIAGRAMS 7-1. BLOCK DIAGRAM – RF SERVO SECTION – RFIN SD0 – SD7 (Page 30) DVDRFP ATOP 59 AIP 54 DIP RFAC RFAC PCMD MDAT RFSIN ATON...

  • Page 30: Block Diagram - Video/Changer Section

    HCD-ZX10D 7-2. BLOCK DIAGRAM – VIDEO/CHANGER SECTION – 3 7 6 3 1 5 1 5 0 DML, DMR, FL, FR, SL, SR, C, SW DATA0 (DM) 31 DATA4 VOUT8 SD0 – SD7 DATA1 (FLR) 45 DATA1 VOUT7 (Page 32) •...

  • Page 31: Tuner/Tape Section

    HCD-ZX10D 7-3. BLOCK DIAGRAM – TUNER/TAPE SECTION – 3 7 6 3 1 5 1 5 0 ANTENNA TUNER UNIT ST-L FM75Ω FM ANT ST-L (COAXIAL) ST-R R-CH (Page 32) AM ANT ST-DOUT/MC-DIN 83 ST-DIN ST-DIN/MC-DOUT 84 ST-DOUT ST-CLK...

  • Page 32: Block Diagram - Audio Section

    HCD-ZX10D 7-4. BLOCK DIAGRAM – AUDIO SECTION – 3 7 6 3 1 5 1 5 0 J701 (2/2) VIDEO/SAT R-CH REC-L (Page 31) ADC_DATA, BCK, ADC_DATA LRCK, XCK VINL DOUT (Page 30) LRCK R-CH VINR LRCK FEED BACK...

  • Page 33: Block Diagram - Amp Section

    HCD-ZX10D 7-5. BLOCK DIAGRAM – AMP SECTION – 3 7 6 3 1 5 1 5 0 D624 FEED BACK (Page 32) J851 PHONES MUTING Q640, 641 MUTING CONTROL SWITCH Q634, 635 POWER AMP IC600 TM608 (1/2) –1 FL, FR, RL, RR, C...

  • Page 34: Block Diagram - Panel/Power Supply Section

    HCD-ZX10D 7-6. BLOCK DIAGRAM – PANEL/POWER SUPPLY SECTION – 3 7 6 3 1 5 1 5 0 D660 AC CUT DETECT T1100 (Page 33) POWER TRANSFORMER D661 F1161 RECT –VL D658 F1171 F1141 RECT +4.5V D656 –VH +4.5V...
  • Page 35 HCD-ZX10D • Note for Printed Wiring Boards and Schematic Diagrams • Circuit Boards Location 3 7 6 3 1 5 1 5 0 Note on Printed Wiring Board: Note on Schematic Diagram. VOLTAGE SELECTOR board • X : parts extracted from the component side.

  • Page 36: Printed Wiring Board - Rf Board

    HCD-ZX10D 7-7. PRINTED WIRING BOARD – RF BOARD – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 RF BOARD RF BOARD (COMPONENT SIDE) (CONDUCTOR SIDE)

  • Page 37: Schematic Diagram - Rf Board

    HCD-ZX10D 7-8. SCHEMATIC DIAGRAM – RF BOARD – • • See page 74 for Waveforms. See page 75 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 RFMON C006 C028 C027 R026 C013 CN002 C030 0.01...

  • Page 38: Printed Wiring Board - Dmb07 Board (Component Side)

    HCD-ZX10D 7-9. PRINTED WIRING BOARD – DMB07 BOARD (Component Side) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 MAIN BOARD VIDEO BOARD CN404 CN1202...

  • Page 39: Printed Wiring Board - Dmb07 Board (Conductor Side)

    HCD-ZX10D 7-10. PRINTED WIRING BOARD – DMB07 BOARD (Conductor Side) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 DMB07 BOARD (CONDUCTOR SIDE) R282 R281...

  • Page 40: Schematic Diagram - Dmb07 Board (1/8)

    HCD-ZX10D 7-11. SCHEMATIC DIAGRAM – DMB07 BOARD (1/8) – • • See page 74 for Waveforms. See page 75 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 (1/8) C518 0.01 FL502 C517 C545 C543...

  • Page 41: Schematic Diagram - Dmb07 Board (2/8)

    HCD-ZX10D 7-12. SCHEMATIC DIAGRAM – DMB07 BOARD (2/8) – • See page 79 for IC Pin Function Description. 3 7 6 3 1 5 1 5 0 (2/8) R787 R786 R785 100k 100k C782 IC703(2/2) 0.0015 NJM3404AV(TE2) R788 R700...

  • Page 42: Schematic Diagram - Dmb07 Board (3/8)

    HCD-ZX10D 7-13. SCHEMATIC DIAGRAM – DMB07 BOARD (3/8) – 3 7 6 3 1 5 1 5 0 (Page 40) (3/8) (Page 44) DGND A3V-2 (Page 45) C526 C527 VGND 0.01 (Page 45) R589 R581 R580 C519 0.01 R368...

  • Page 43: Schematic Diagram - Dmb07 Board (4/8)

    HCD-ZX10D 7-14. SCHEMATIC DIAGRAM – DMB07 BOARD (4/8) – • • • See page 74 for Waveforms. See page 75 for IC Block Diagrams. See page 79 for IC Pin Function Description. 3 7 6 3 1 5 1 5 0...

  • Page 44: Schematic Diagram - Dmb07 Board (5/8)

    HCD-ZX10D 7-15. SCHEMATIC DIAGRAM – DMB07 BOARD (5/8) – • See page 75 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 (5/8) SIGNAL_BUS (Page 41) R202 LATCH IC256 SN74LV573APWR Q201 DTC114TE-TL INVERTER R9998 R9999...

  • Page 45: Schematic Diagram - Dmb07 Board (6/8)

    HCD-ZX10D 7-16. SCHEMATIC DIAGRAM – DMB07 BOARD (6/8) – • • See page 74 for Waveforms. See page 79 for IC Pin Function Description. 3 7 6 3 1 5 1 5 0 (6/8) ZIVA_5.1CH_BUS CN202 CB/B CR/R R268...

  • Page 46: Schematic Diagram - Dmb07 Board (7/8)

    HCD-ZX10D 7-17. SCHEMATIC DIAGRAM – DMB07 BOARD (7/8) – • See page 75 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 (7/8) IC203 HY57V283220T6 C218 128Mbit SD-RAM 0.01 MD15 C220 0.01 MD14 FL203 MD13 C227 0.01...

  • Page 47: Schematic Diagram - Dmb07 Board (8/8)

    HCD-ZX10D 7-18. SCHEMATIC DIAGRAM – DMB07 BOARD (8/8) – • See page 75 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 (8/8) ZIVA_5.1CH_BUS (Page 45) DAC_CTRL_BUS R310 R311 C324 C323 C322 R312 R313 FL302...

  • Page 48: Printed Wiring Board - Video Board

    HCD-ZX10D 7-19. PRINTED WIRING BOARD – VIDEO BOARD – • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 COMPONENT VIDEO S VIDEO OUT VIDEO OUT (CHASSIS) (CHASSIS) VIDEO BOARD R1233 R1231...

  • Page 49: Schematic Diagram - Video Board

    HCD-ZX10D 7-20. SCHEMATIC DIAGRAM – VIDEO BOARD – • See page 74 for Waveforms. 3 7 6 3 1 5 1 5 0 JW1205 CN1202 WIDE VIDEO AMP, 75Ω DRIVER I/P_SW JR1204 IC1201 V_5V MM1623BF J1200 V_GND C1205 1 50V...

  • Page 50: Printed Wiring Boards - Changer Section

    HCD-ZX10D 7-21. PRINTED WIRING BOARDS – CHANGER SECTION – • : Uses unleaded solder. 7-22. SCHEMATIC DIAGRAM – CHANGER SECTION – 3 7 6 3 1 5 1 5 0 • See page 35 for Circuit Boards Location. MAIN BOARD...

  • Page 51: Printed Wiring Board - Main Board

    HCD-ZX10D 7-23. PRINTED WIRING BOARD – MAIN BOARD – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 J701 VIDEO/SAT VIDEO/SAT PHONO J202 M501 SUBWOOFER OUT...

  • Page 52: Schematic Diagram - Main Board (1/5)

    HCD-ZX10D 7-24. SCHEMATIC DIAGRAM – MAIN BOARD (1/5) – • See page 74 for Waveforms. 3 7 6 3 1 5 1 5 0 (1/5) HRPE101 HP101 (REC/PB/ERASE) (PB) NO103 (DECK-B) (DECK-A) NO102 L-PB C125 C133 680p R-CH C127...

  • Page 53: Schematic Diagram - Main Board (2/5)

    HCD-ZX10D 7-25. SCHEMATIC DIAGRAM – MAIN BOARD (2/5) – • • See page 74 for Waveforms. See page 79 for IC Pin Function Description. 3 7 6 3 1 5 1 5 0 (Page 52) (2/5) CN507 R397 R487...

  • Page 54: Schematic Diagram - Main Board (3/5)

    HCD-ZX10D 7-26. SCHEMATIC DIAGRAM – MAIN BOARD (3/5) – 3 7 6 3 1 5 1 5 0 (Page 52) (3/5) NO510 GM L-CH A.GND GM R-CH HP DETECT (Page 63) JR131 NO511 MICIN MIC_GND A+9V (Page 63) C516...

  • Page 55: Schematic Diagram - Main Board (4/5)

    HCD-ZX10D 7-27. SCHEMATIC DIAGRAM – MAIN BOARD (4/5) – • See page 75 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 (Page 53) (4/5) TABLE LOADING MOTOR DRIVE MOTOR DRIVE +12V REGULATOR IC514 IC515...

  • Page 56: Schematic Diagram - Main Board (5/5)

    HCD-ZX10D 7-28. SCHEMATIC DIAGRAM – MAIN BOARD (5/5) – 3 7 6 3 1 5 1 5 0 (Page 53) (Page 52) (Page 54) (5/5) ELECTRICAL VOLUME IC501 C231 M61530 IC-1 C213 0.22 R218 2.2k C211 R217 C243 220p...

  • Page 57: Printed Wiring Boards - Front Amp Section

    HCD-ZX10D 7-29. PRINTED WIRING BOARDS – FRONT AMP SECTION – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 TM608 SPEAKER FRONT R SURR R CENTER...

  • Page 58: Schematic Diagram - Front Amp Section (1/2)

    HCD-ZX10D 7-30. SCHEMATIC DIAGRAM – FRONT AMP SECTION (1/2) – 3 7 6 3 1 5 1 5 0 (1/2) R637 C637 100V Q634 DTA124EKA R693 R640 2.2k POWER AMP IC600 Q640 C634 STK412-230 2SC3661 R634 Q634,635 MUTING 2.2k...

  • Page 59: Schematic Diagram - Front Amp Section (2/2)

    HCD-ZX10D 7-31. SCHEMATIC DIAGRAM – FRONT AMP SECTION (2/2) – 3 7 6 3 1 5 1 5 0 (2/2) EP608 (CHASSIS) JW682 (AUS) R682 L682 SURR L L680 R680 JW720 FRONT L JW699 JW680 JW684 (AUS) JW689 R684...

  • Page 60: Printed Wiring Board - Surround Board

    HCD-ZX10D 7-32. PRINTED WIRING BOARD – SURROUND BOARD – • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 MAIN BOARD CN502 SURROUND BOARD (Page 51) IC701 R796 C771 C770 D791 D790...

  • Page 61: Schematic Diagram - Surround Board

    HCD-ZX10D 7-33. SCHEMATIC DIAGRAM – SURROUND BOARD – 3 7 6 3 1 5 1 5 0 POWER AMP IC701 STK413-430 R799 100k R798 100k R792 D791 NO702 C700 100k UDZ-TE-17-18B R700 REAR-R NO700 REAR GND C703 R793 R730...

  • Page 62: Printed Wiring Boards - Panel Section (1/5)

    HCD-ZX10D 7-34. PRINTED WIRING BOARDS – PANEL SECTION (1/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 MIC BOARD GAME/HP BOARD C822 C834 C824...

  • Page 63: Schematic Diagram - Panel Section (1/5)

    HCD-ZX10D 7-35. SCHEMATIC DIAGRAM – PANEL SECTION (1/5) – • See page 75 for IC Block Diagrams. 3 7 6 3 1 5 1 5 0 C804 150p CN802 (E15,SP,MY) GM-SIG EPT803 R805 MIC AMP C842 150k C814 IC850(1/2)

  • Page 64: Printed Wiring Board - Panel Section (2/5)

    HCD-ZX10D 7-36. PRINTED WIRING BOARD – PANEL SECTION (2/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 PANEL BOARD R941 R1350 R940 FL901 D905...

  • Page 65: Panel Section (2/5)

    HCD-ZX10D 7-37. SCHEMATIC DIAGRAM – PANEL SECTION (2/5) – • • • See page 74 for Waveforms. See page 75 for IC Block Diagrams. See page 79 for IC Pin Function Description. 3 7 6 3 1 5 1 5 0...

  • Page 66: Printed Wiring Boards - Panel Section (3/5)

    HCD-ZX10D 7-38. PRINTED WIRING BOARDS – PANEL SECTION (3/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 VOL BOARD R968 S913 S904 S918 ROCK...

  • Page 67: Schematic Diagram - Panel Section (3/5)

    HCD-ZX10D 7-39. SCHEMATIC DIAGRAM – PANEL SECTION (3/5) – 3 7 6 3 1 5 1 5 0 R969 S904 S913 R968 SALSA ROCK C968 S975 ROTARY ENCODER C967 S905 R967 S914 R970 VOLUME REGGAE JAZZ R971 S906 R966...

  • Page 68: Printed Wiring Boards - Panel Section (4/5)

    HCD-ZX10D 7-40. PRINTED WIRING BOARDS – PANEL SECTION (4/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 TC-A BOARD R842 Q907 R833 JR903 D919...

  • Page 69: Schematic Diagram - Panel Section (4/5)

    HCD-ZX10D 7-41. SCHEMATIC DIAGRAM – PANEL SECTION (4/5) – 3 7 6 3 1 5 1 5 0 CN915 +VH 9V +VL 9V LED GND TAPE A LED KEY0 DGND (Page 65) KEY5 D918 D919 SEL5423E SEL5423E JR903 R842...

  • Page 70: Printed Wiring Boards - Panel Section (5/5)

    HCD-ZX10D 7-42. PRINTED WIRING BOARDS – PANEL SECTION (5/5) – • : Uses unleaded solder. • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 TC-B BOARD CD-R BOARD NO919 NO925 R857...

  • Page 71: Schematic Diagram - Panel Section (5/5)

    HCD-ZX10D 7-43. SCHEMATIC DIAGRAM – PANEL SECTION (5/5) – 3 7 6 3 1 5 1 5 0 CN916 TAPE B LED KEY TC-B GAME, REC LED CD LED KEY 4 DGND VH +9V VL +9V (Page 65) LED GND...

  • Page 72: Printed Wiring Boards - Power Supply Section

    HCD-ZX10D 7-44. PRINTED WIRING BOARDS – POWER SUPPLY SECTION – • See page 35 for Circuit Boards Location. 3 7 6 3 1 5 1 5 0 CN1112 FH1172 F1171 FH1171 TRANS BOARD FH1152 F1151 FH1151 POWER BOARD NO607...

  • Page 73: Schematic Diagram - Power Supply Section

    HCD-ZX10D 7-45. SCHEMATIC DIAGRAM – POWER SUPPLY SECTION – 3 7 6 3 1 5 1 5 0 F1141 T8AL 250V F1151 CN1112 T8AL 250V NO1111 VH(AC) 4P (E15,SP,MY) T1100 (AUS) VH(AC) POWER TRANSFORMER (E15,SP,MY) JW1111 F1161 T8AL 250V...
  • Page 74 HCD-ZX10D • Waveforms 3 7 6 3 1 5 1 5 0 – VIDEO Board – – MAIN Board – – PANEL Board – – RF Board – – DMB07 Board – IC1201 qh (CROUT) Q101 (Base) (REC mode)
  • Page 75 HCD-ZX10D 3 7 63 1515 0 • IC Block Diagrams – RF Board – IC001 SP3723CAF0PM 64 63 62 61 60 59 55 54 53 52 FAST ATTACK INPUT OUTPUT HOLD FULL WAVE AGC CHARGE INHIBIT RECTIFER PUMP PROGRAMMABLE...
  • Page 76 HCD-ZX10D 3 7 63 1515 0 – DMB07 Board – IC231 – 233, 256, 258, 259 IC302 PCM1609KPTR SN74LV573APWR 20 VCC 36 35 34 33 19 1Q VCC3 FUNCTION AGND3 CONTROL VCC4 INTERFACE AGND4 18 2Q SYSTEM SCKI CLOCK...
  • Page 77 HCD-ZX10D 3 7 63 1515 0 IC509 CXD3068Q 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 DVDD2 ASYE DIGITAL ASYMMETRY CORRECTOR DIGITAL DOUT LRCK D/A DIGITAL PCMD INTERFACE...
  • Page 78 HCD-ZX10D 3 7 63 1515 0 – MAIN Board – IC514, 515 BA6956AN IC516 PQ12RF21 OVERHEAT PROTECTION CONTROL LOGIC CIRCUIT PROTECTION CIRCUIT REFERENCE VOLTAGE OUTPUT GENERATION ON/OFF CIRCUIT CONTROL CIRCUIT IC517 SI-8050JF IC518 SI-8033JF OVER CURRENT REGULATOR PROTECTOR LATCH RESET &...
  • Page 79 HCD-ZX10D 3 7 63 1515 0 • IC Pin Function Description DMB07 BOARD IC207 ZIVA5X-C1F (DVD SYSTEM PROCESSOR) Pin No. Pin Name Description VDDP – Power supply terminal (+3.3V) Address signal output to the program ROM and address latch...
  • Page 80 HCD-ZX10D 3 7 63 1515 0 Pin No. Pin Name Description MDQM2 Write mask signal output to the SD-RAM VDD25 – Power supply terminal (+3.3V) 88 to 95 MD20 to MD27 Two-way data bus with the SD-RAM GND25 –...
  • Page 81 HCD-ZX10D 3 7 63 1515 0 Pin No. Pin Name Description – Power supply terminal (+1.8V) – Ground terminal Audio system clock output to the D/A converter and A/D converter LRCK L/R sampling clock signal (44.1 kHz) output to the D/A converter Bit clock signal (2.8224 MHz) output to the D/A converter...
  • Page 82 HCD-ZX10D 3 7 63 1515 0 Pin No. Pin Name Description 193, 194 HCS2, HCS1 Chip select signal output terminal Not used HCS0 Chip select signal output to the program ROM VDDP – Power supply terminal (+3.3V) TRST Reset signal input terminal (for JTAG)
  • Page 83 HCD-ZX10D 3 7 63 1515 0 DMB07 BOARD IC701 TMC57929PGF-RDP (DVD DECODER) Pin No. Pin Name Description 1, 2 D5, D6 Two-way data bus with the mechanism controller – Ground terminal Two-way data bus with the mechanism controller Address signal input from the mechanism controller –...
  • Page 84 HCD-ZX10D 3 7 63 1515 0 Pin No. Pin Name Description XPDI Not used VDDS – Power supply terminal (+5V) 59, 60 HA0, HA2 Not used – Ground terminal 62, 63 HCS0, HCS1 Not used – Power supply terminal (+3.3V)
  • Page 85 HCD-ZX10D 3 7 63 1515 0 Pin No. Pin Name Description 128, 129 VCCA3, VCCA2 – Power supply terminal (+3.3V) Signal output from the charge pump for phase comparator PDHVCC Middle point voltage input terminal for RF PLL Signal output from the charge pump for frequency comparator...
  • Page 86 HCD-ZX10D 3 7 63 1515 0 DMB07 BOARD IC901 CXP973064-245R (MECHANISM CONTROLLER) Pin No. Pin Name Description NO_USE Not used SDEN Serial data enable signal output to the CD/DVD RF amplifier DOCTRL/ Digital out on/off control signal output to the DSP ISBTEST "L": digital out off, "H": digital out on...
  • Page 87 HCD-ZX10D 3 7 63 1515 0 Pin No. Pin Name Description SQCK Subcode Q data reading clock signal output to the DSP – Ground terminal CONTROL_2, 56, 57 Not used CONTROL_1 GFS_DVD Guard frame sync signal input from the DVD decoder...
  • Page 88 HCD-ZX10D 3 7 63 1515 0 MAIN BOARD IC401 M30620MCN-A42FPU0 (MASTER CONTROLLER) Pin No. Pin Name Description MP3 ACK Not used Not used MP3 CS Not used SIRCS Remote control signal input from the remote control receiver MP3 DATA OUT...
  • Page 89 HCD-ZX10D 3 7 63 1515 0 Pin No. Pin Name Description DSENS Disc in detection signal input from the disc in detect sensor OC-SW1 Disc tray open/close detection signal input terminal CHK-SW Disc chucking detection signal input terminal OC-SW2...
  • Page 90 HCD-ZX10D 3 7 63 1515 0 Pin No. Pin Name Description ST-CE PLL serial chip enable signal output to the tuner unit TUNED Tuning detection signal input from the tuner unit "L": tuned STEREO FM stereo detection signal input from the tuner unit "L": stereo...
  • Page 91 HCD-ZX10D 3 7 63 1515 0 PANEL BOARD IC901 MB90M407PF-G-142-BNDE1 (DISPLAY CONTROLLER) Pin No. Pin Name Description 1 to 4 G4 to G1 Grid drive signal output to the fluorescent indicator tube 5 to 10 SEG-1 to SEG-6 Segment drive signal output to the fluorescent indicator tube VSS-IO –...
  • Page 92 HCD-ZX10D 3 7 63 1515 0 Pin No. Pin Name Description NO USE Not used 86 to 100 G19 to G5 Grid drive signal output to the fluorescent indicator tube L 13942296513 u163 http://www.xiaoyu163.com...

  • Page 93: Exploded Views

    HCD-ZX10D SECTION 8 EXPLODED VIEWS 3 7 63 1515 0 NOTE: • -XX and -X mean standardized parts, so they may • Items marked “*” are not stocked since they are The components identified by mark 0 or dotted line with mark 0 are have some difference from the original one.

  • Page 94: Panel Board Section

    HCD-ZX10D 3 7 63 1515 0 8-2. PANEL BOARD SECTION not supplied not supplied (POWER SW board) not supplied (TC-A board) not supplied not supplied not supplied (FUNCTION SW board) not supplied (CURSOR board) L 13942296513 not supplied not supplied...

  • Page 95: Front Panel Section

    HCD-ZX10D 3 7 63 1515 0 8-3. FRONT PANEL SECTION not supplied not supplied (CD-L board) not supplied not supplied not supplied not supplied not supplied L 13942296513 not supplied (CD-R board) not supplied Ref. No. Part No. Description Remark Ref.

  • Page 96: Back Panel Section

    HCD-ZX10D 3 7 63 1515 0 8-4. BACK PANEL SECTION heat sink section not supplied mechanism deck section-1 M501 supplied not supplied L 13942296513 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1066-611-A VIDEO BOARD, COMPLETE...

  • Page 97: Heat Sink Section

    HCD-ZX10D 3 7 63 1515 0 8-5. HEAT SINK SECTION not supplied not supplied (SENSOR board) not supplied F1191 F1151 T1100 F1161 F1181 not supplied F1171 F1141 L 13942296513 chassis section The components identified by mark 0 or dotted line with mark 0 are critical for safety.

  • Page 98: Chassis Section

    HCD-ZX10D 3 7 63 1515 0 8-6. CHASSIS SECTION not supplied not supplied not supplied not supplied not supplied not supplied not supplied L 13942296513 not supplied not supplied not supplied not supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety.

  • Page 99: Dvd Mechanism Deck Section-1 (Cdm79B-Dvbu64)

    HCD-ZX10D 3 7 63 1515 0 8-7. DVD MECHANISM DECK SECTION-1 (CDM79B-DVBU64) supplied supplied not supplied L 13942296513 not supplied DVD mechanism deck section-2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-074-717-21 TRAY 3-074-737-01 PLATE (GUIDE)

  • Page 100: Dvd Mechanism Deck Section-2 (Cdm79B-Dvbu64)

    HCD-ZX10D 3 7 63 1515 0 8-8. DVD MECHANISM DECK SECTION-2 (CDM79B-DVBU64) optical block section S002 M001 not supplied L 13942296513 not supplied (MD-94 board) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-074-742-01 GEAR (SHAFT) 3-074-739-01 COLLAR (SWING) 4-218-252-52 SCREW (+PTPWH M2.6), FLOATING...

  • Page 101: Optical Block Section

    HCD-ZX10D 3 7 63 1515 0 8-9. OPTICAL BLOCK SECTION not supplied L 13942296513 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No.

  • Page 102: Electrical Parts List

    HCD-ZX10D SECTION 9 CD-L CD-R 3 7 63 1515 0 ELECTRICAL PARTS LIST CURSOR DMB07 The components identified by mark NOTE: 0 or dotted line with mark 0 are critical for safety. • Due to standardization, replacements in the parts •...
  • Page 103 HCD-ZX10D 3 7 63 1515 0 DMB07 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C239 1-164-943-11 CERAMIC CHIP 0.01uF C322 1-107-820-11 CERAMIC CHIP 0.1uF C240 1-164-943-11 CERAMIC CHIP 0.01uF C323 1-107-820-11 CERAMIC CHIP 0.1uF...
  • Page 104 HCD-ZX10D DMB07 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C551 1-125-891-11 CERAMIC CHIP 0.47uF C764 1-164-943-11 CERAMIC CHIP 0.01uF C552 1-216-295-00 SHORT CHIP C765 1-164-943-11 CERAMIC CHIP 0.01uF C553 1-164-940-11 CERAMIC CHIP 0.0033uF 10%...
  • Page 105 HCD-ZX10D 3 7 63 1515 0 DMB07 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D901 8-719-988-61 DIODE 1SS355TE-17 < SHORT > D1303 8-719-988-61 DIODE 1SS355TE-17 D1304 8-719-988-61 DIODE 1SS355TE-17 JW392 1-216-864-11 SHORT CHIP JW801 1-218-990-11 SHORT CHIP <...
  • Page 106 HCD-ZX10D DMB07 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R257 1-216-829-11 METAL CHIP 4.7K 1/10W R504 1-216-841-11 METAL CHIP 1/10W R259 1-216-829-11 METAL CHIP 4.7K 1/10W R260 1-216-829-11 METAL CHIP 4.7K...
  • Page 107 HCD-ZX10D 3 7 63 1515 0 DMB07 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R599 1-216-821-11 METAL CHIP 1/10W R786 1-216-845-11 METAL CHIP 100K 1/10W R601 1-216-864-11 SHORT CHIP R629 1-216-864-11 SHORT CHIP R787...
  • Page 108 HCD-ZX10D DMB07 3 7 63 1515 0 FUNCTION SW GAME/HP MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R9981 1-216-864-11 SHORT CHIP A-4752-631-A JOG BOARD, COMPLETE R9982 1-216-864-11 SHORT CHIP ******************** R9983 1-216-864-11 SHORT CHIP...
  • Page 109 HCD-ZX10D 3 7 63 1515 0 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C107 1-164-156-11 CERAMIC CHIP 0.1uF C170 1-162-961-11 CERAMIC CHIP 330PF C108 1-126-947-11 ELECT 47uF C171 1-136-170-00 FILM 0.27uF C109 1-162-960-11 CERAMIC CHIP...
  • Page 110 HCD-ZX10D MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C233 1-126-964-11 ELECT 10uF C504 1-136-159-00 FILM 0.033uF C234 1-126-960-11 ELECT C505 1-162-970-11 CERAMIC CHIP 0.01uF C235 1-126-964-11 ELECT 10uF...
  • Page 111 HCD-ZX10D 3 7 63 1515 0 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C598 1-130-483-00 MYLAR 0.01uF FL585 1-234-177-21 FILTER, CHIP EMI (AUS) C599 1-130-483-00 MYLAR 0.01uF < IC > < CONNECTOR >...
  • Page 112 HCD-ZX10D MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JR400 1-216-296-11 SHORT CHIP Q140 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R Q145 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R JR401 1-216-296-11 SHORT CHIP Q165 6-550-889-01 TRANSISTOR 2SC5938-7112-1B...
  • Page 113 HCD-ZX10D 3 7 63 1515 0 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q870 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R R159 1-216-864-11 SHORT CHIP < RESISTOR > R160 1-216-841-11 METAL CHIP 1/10W R161 1-218-867-11 METAL CHIP 6.8K...
  • Page 114 HCD-ZX10D MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R217 1-216-821-11 METAL CHIP 1/10W R275 1-216-833-11 METAL CHIP 1/10W R218 1-216-825-11 METAL CHIP 2.2K 1/10W R276 1-216-833-11 METAL CHIP...
  • Page 115 HCD-ZX10D 3 7 63 1515 0 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R412 1-216-833-11 METAL CHIP 1/10W R507 1-216-821-11 METAL CHIP 1/10W R413 1-216-864-11 SHORT CHIP R508 1-216-841-11 METAL CHIP 1/10W R417...
  • Page 116 HCD-ZX10D MAIN MD-94 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R588 1-216-829-11 METAL CHIP 4.7K 1/10W C829 1-162-969-11 CERAMIC CHIP 0.0068uF 10% R590 1-216-842-11 METAL CHIP 1/10W C830 1-115-416-11 CERAMIC CHIP 0.001uF...
  • Page 117 HCD-ZX10D 3 7 63 1515 0 PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark RV802 1-227-452-11 RES, VAR, CARBON 50K (ECHO LEVEL) C961 1-126-963-11 ELECT 4.7uF ************************************************************ C966 1-107-826-11 CERAMIC CHIP 0.1uF A-4752-625-A PANEL BOARD, COMPLETE (E15, SP, MY)
  • Page 118 HCD-ZX10D PANEL 3 7 63 1515 0 POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R905 1-216-835-11 METAL CHIP 1/10W S903 1-771-410-21 SWITCH, TACTILE (SLEEP) R906 1-216-835-11 METAL CHIP 1/10W S921 1-771-410-21 SWITCH, TACTILE (TUNER/BAND)
  • Page 119 HCD-ZX10D 3 7 63 1515 0 POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C691 1-162-974-11 CERAMIC CHIP 0.01uF Q641 8-729-802-80 TRANSISTOR 2SC3661 C692 1-162-974-11 CERAMIC CHIP 0.01uF Q644 8-729-901-81 TRANSISTOR 2SC2412K-T-146-R C693 1-162-974-11 CERAMIC CHIP 0.01uF...
  • Page 120 HCD-ZX10D POWER 3 7 63 1515 0 POWER SW Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R653 1-216-841-11 METAL CHIP 1/10W < RESISTOR > R654 1-216-841-11 METAL CHIP 1/10W R655 1-216-841-11 METAL CHIP 1/10W...
  • Page 121 HCD-ZX10D 3 7 63 1515 0 SE-130 SENSOR SURROUND Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C051 1-125-891-11 CERAMIC CHIP 0.47uF R041 1-216-821-11 METAL CHIP 1/10W C052 1-107-826-11 CERAMIC CHIP 0.1uF R046 1-216-833-11 METAL CHIP...
  • Page 122 HCD-ZX10D SURROUND 3 7 63 1515 0 TC-A Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 R730 < DIODE > 1-234-499-21 ENCAPSULATED COMPONENT 0.22 R731 1-216-821-11 METAL CHIP 1/10W D720 8-719-404-50 DIODE MA111-TX R732...
  • Page 123 HCD-ZX10D 3 7 63 1515 0 TC-A TC-B TRANS VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < LED > R851 1-216-817-11 METAL CHIP 1/10W D918 8-719-058-03 LED SEL5423E-TP15 (h) R852 1-216-823-11 METAL CHIP 1.5K...
  • Page 124 HCD-ZX10D VIDEO 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1209 1-126-960-11 ELECT < RESISTOR > C1210 1-126-960-11 ELECT R1200 1-216-833-11 METAL CHIP 1/10W C1211 1-104-665-11 ELECT 100uF R1201 1-216-833-11 METAL CHIP...
  • Page 125 HCD-ZX10D 3 7 63 1515 0 VOLTAGE SELECTOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R961 1-216-829-11 METAL CHIP 4.7K 1/10W S975 1-418-725-41 ENCODER, ROTARY (12 TYPE) (VOLUME) R962 1-216-827-11 METAL CHIP 3.3K 1/10W...
  • Page 126 HCD-ZX10D 3 7 63 1515 0 Ref. No. Part No. Description Remark MISCELLANEOUS ************** 1-769-992-11 WIRE (FLAT TYPE) (13 CORE) 1-796-487-51 DECK, MECHANICAL (CWM43RR35) 1-773-163-11 WIRE (FLAT TYPE) (21 CORE) 1-693-603-31 TUNER (FM/AM) 1-769-939-11 WIRE (FLAT TYPE) (11 CORE)
  • Page 127 HCD-ZX10D 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 128 HCD-ZX10D 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.

Table of Contents