Power Button Board - HP elitebook 820 G2 Maintenance And Service Manual
Hide thumbs
Also See for elitebook 820 G2:
- Maintenance and service manual (136 pages) ,
- Disassembly instructions manual (19 pages)
Table of Contents
Advertisement
Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
a.
Battery (see
b.
Hard drive (see
c.
Keyboard (see
d.
Top cover (see
e.
System board (see
Remove the power button board:
1.
Remove the two Phillips PM2.0×3.25 screws (1) that secure the power button board to the top cover.
2.
Remove the power button board (2) and cable.
Reverse this procedure to install the power button board.
82
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Service cover on page
Battery on page
39)
Hard drive/solid-state drive on page
Keyboard on page
50)
Top cover on page
57)
System board on page
37), and then remove the following components:
41)
76)
Spare part number
730552-001
Hide quick links:
Advertisement
Table of Contents
