Sony bvm-l230 Operation Manual page 80
Hide thumbs
Also See for bvm-l230:
- Service manual (298 pages) ,
- Operation manual (96 pages) ,
- Brochure & specs (17 pages)
Table of Contents
Advertisement
Menu
Location
Trap
Mode
Trap Address Setting
Trap Address Status
Reset Mode/Address
Authentication
Community
Protocol Setting
SDCP/SDAP Community
SDCP Port No
SDAP Port No
SDAP Broadcast
SDAP Broadcast Period
Reset Protocol Setting
Function Key
80
Controller Menu
Function and operation ([
Sets the location information.
When the item is selected, you can enter a new name.
New Name: Enter a new name (up to 20 characters).
Sets the address to send the information.
Sets the settings to send information manually or automatically ([Manual] or Auto).
This item cannot be selected when the monitor is controlled with BKM-15R or BVM-A14F5.
Sets the IP address to send the information. [000.000.000.000]
When Mode is set to Manual or the monitor is controlled with BKM-15R or BVM-A14F5, you
can select this item.
When the item is selected, you can set the IP address of Trap1 to Trap4.
When the monitor is controlled with BKM-15R or BVM-A14F5, you can set only the IP
address of Trap1 and Trap2.
Cancel: Cancels the changed or confirmed setting.
Confirm: Saves the changed or confirmed setting.
Displays the IP address to send the information.
When Mode is set to Auto, you can select this item.
This item cannot be selected when the monitor is controlled with BKM-15R or BVM-A14F5.
When the item is selected, the IP address of Trap1 to Trap4 is displayed.
Resets the settings to send information manually or automatically and the IP address to the
factory setting.
This item cannot be selected when the monitor is controlled with BKM-15R or BVM-A14F5.
When the item is selected, the following message appears.
Are you sure?
OK: To reset the data, press the ENTER (Ent) button.
Cancel: To cancel, press the MENU button.
Sets whether or not to issue the authentication ([Disable] or Enable).
This item cannot be selected when the monitor is controlled with BKM-15R or BVM-A14F5.
Sets the community name.
This item cannot be selected when the monitor is controlled with BKM-15R or BVM-A14F5.
When the item is selected, you can enter the community name (up to 20 characters).
public: Initially, public is entered automatically. Enter any character after it.
New Name: Enter a community name.
Sets the required items for communications such as the port number.
This item cannot be selected when the monitor is controlled with BKM-15R or BVM-A14F5.
For the setting value, consult the network administrator.
Sets the SDCP/SDAP community name.
When the item is selected, you can enter the community name (four characters).
SONY: SONY is entered as a community name.
New Name: Enter a new name.
Sets the SDCP port number.
Set to 53434 to 53534. [53484]
Sets the SDAP port number.
Set to 53812 to 53912. [53862]
Sets whether or not to issue the SDAP (Disable or [Enable]).
Sets the period (seconds) to issue the SDAP.
Set to 05 to 30. [30]
Resets the protocol setting.
When the item is selected, the following message appears.
Are you sure?
OK: To reset data, press the ENTER (Ent) button.
Cancel: To cancel, press the MENU button.
Assigns the function to the function buttons.
This item cannot be selected when the monitor is controlled with BKM-15R or BVM-A14F5.
]: factory setting)
Advertisement
Table of Contents
