hit counter script
NEC IP3AT-8WV(AUSTRALIA) User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. IP Phone
  5. IP3AT-8WV(AUSTRALIA)
  6. User manual

NEC IP3AT-8WV(AUSTRALIA) User Manual

Wireless ip telephone
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MH240 Wireless IP Telephone
USER'S GUIDE
Model: IP3NA-8WV(USA) / IP3AT-8WV(Australia) / IP3PH-8WV(EU)
Before using your product, read this User's Guide thoroughly to ensure
correct handling.
After reading the User's Guide, keep it in a place that is accessible for read
reference.
A50-017158-001 Issue1.2, January 2009

Advertisement

Table of Contents
loading

Related Manuals for NEC NEC IP3AT-8WV(AUSTRALIA)

Summary of Contents for NEC NEC IP3AT-8WV(AUSTRALIA)

  • Page 1 MH240 Wireless IP Telephone USER’S GUIDE Model: IP3NA-8WV(USA) / IP3AT-8WV(Australia) / IP3PH-8WV(EU) Before using your product, read this User’s Guide thoroughly to ensure correct handling. After reading the User’s Guide, keep it in a place that is accessible for read reference.
  • Page 3 NEC Infrontia Corporation reserves the right to change the specifications, functions, or features, at any time, without notice. NEC Infrontia Corporation has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Infrontia Corporation and shall not be reproduced without prior written approval from NEC Infrontia Corporation.
  • Page 5 --------------------------------------------------------------------------- Important: Read this information before using your MH240 Phone. Read the following instructions for the safe use of this product to prevent you and other people from possible injury, and possible damage to property. Improper handling may cause heat, explosion, and/or fire.
  • Page 6 Contact the nearest NEC service office. If you keep using the unit, it may cause fire or electrical shock. Keep out of reach from children.
  • Page 7 ● Follow the instruction below when you use a battery pack. They may cause heating, explosion, and fire; ● Do not put the battery pack into a microwave oven or a pressure chamber. ● Do not use other batteries with this battery pack. ●...
  • Page 8 This page is for your notes.

  • Page 9: Important Note

    --------------------------------------------------------------------------- This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 10 Industry Canada Portion --------------------------------------------------------------------------- Canada Regulatory Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada. This device complies with RSS 210 of Industry Canada (IC). Operation is subject to the following two conditions: ●...

  • Page 11: Declaration Of Conformity

    European Union Information --------------------------------------------------------------------------- Notice to the user The handset described in this manual is intended to be used in combination with NEC Assured Mobility concept for Wireless Local Area Networks. Country specific limitation Italy General authorization is required when this handset is used outside own premises.
  • Page 12 In case your electrical and electronic products need to be disposed of please refer to your supplier or the contractual agreements that your company has made upon acquisition of these products. www.nec-philips.com/weee sound recycling. For countries outside the European Union Disposal of electrical and electronic products in countries outside the European Union should be done in line with the local regulations.

  • Page 13: Table Of Contents

    0.PRECAUTION • SIGNAL WORDS... 1 • SAFETY SYMBOLS... 1 • IMPORTANT SAFETY INFORMATION ... 2 1.INTRODUCTION • WHAT IS MH240? ... 5 • ABOUT THIS GUIDE ... 5 • KEYS AND PARTS ... 6 • ICONS... 7 • STANDBY MODE... 8 •...
  • Page 14 5.CALL HISTORY • TO VIEW CALL HISTORY... 19 • TO MAKE A CALL FROM CALL HISTORY ... 20 • TO ADD PHONE NUMBER TO DIRECTORY ... 20 • TO DELETE A CALL HISTORY ... 23 • TO DELETE ALL CALL HISTORIES ... 23 6.DIRECTORY •...
  • Page 15 • FONT SIZE ... 45 • LANGUAGE ... 46 • MY NAME ... 46 • DISPLAY PATTERN ... 47 • CHANGE PASSWORD ... 47 • KEY TOUCH TONE ... 48 • SPEAKER MONITOR... 48 • DATE ... 49 • TIME... 49 •...

  • Page 16: Trouble Shooting

    14.TROUBLE SHOOTING • MESSAGE MEANINGS AND SUGGESTIONS ... 69 • TIPS AND SUGGESTIONS ... 70 15.SPECIFICATIONS • TECHNICAL SPECIFICATIONS ... 71 • LED SPECIFICATIONS... 72 16.LICENSE...

  • Page 17: Signal Words

    RECAUTION To avoid serious injury or death, follow the safety information in this section. • SIGNAL WORDS DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

  • Page 18: Important Safety Information

    • IMPORTANT SAFETY INFORMATION Observe these precautions when using a lithium-ion battery pack. ● Never charge the pack from other than the phone or the appropriate charger. ● The lithium-ion battery pack has a specified connector orientation. When inserting the pack into the phone, observe the correct connector orientation. ●...
  • Page 19 Do not insert metallic objects or put metallic objects into the interiors of the products through openings, which could result in fires, electrical shock hazards or failures. If it is necessary to use an AC adapter, use one of the specified type; otherwise, fires, electrical shock hazards or failures could result.
  • Page 20 This page is for your notes.

  • Page 21: Introduction

    NTRODUCTION • WHAT IS MH240? MH240 is a wireless VoIP phone that complies with IEEE 802.11b/g specifications. MH240 has the following features: MH240 dedicated features are available such as Call History, Directory, Password Lock, Favorites, Speed Dial, Speaker monitor and Courtesy Mode. •...

  • Page 22: Keys And Parts

    • KEYS AND PARTS The phone has the following keys and parts. (3)USB Connector (5)Soft Keys Delete Save (12)TRANSFER Key (10)LEFT Key (14)CONFERENCE Key (16)OFF HOOK Key (18)Headset Connector (1)Info LED (2)Ear Speaker (4)Display (6)Multi Function Keys Back (8)UP Key (7)OK Key (13)HOLD/ CLEAR Key...

  • Page 23: Icons

    Lock icon ( ): indicates your phone is locked. I-SIP icon ( ): indicates NEC Enhanced SIP is enabled. Cursor icon ( ): indicates active direction keys (UP, DOWN, LEFT or RIGHT) depend on the phone status.

  • Page 24: Standby Mode

    • STANDBY MODE Your phone starts up in this mode after being powered on. Your phone displays the first screen similar to the following. 1/ 1 Tue 12:00AM MH240 • MAIN MENU Press the key when your phone is in Standby mode.

  • Page 25: Getting Started

    ● Bring batteries to our repair counter with the contacts being taped to prevent shorts or enclosed individually in plastic bags. <Our repair counter> For more details, visit the NEC Infrontia Environment Website. http://www.necinfrontia.co.jp/english/company/environment/index.htm TARTED • HOW TO REPLACE THE BATTERY Replace the battery of the phone as follows.

  • Page 26: How To Charge The Battery

    • HOW TO CHARGE THE BATTERY Be sure to charge the battery before using the phone for the first time. Use one of the following: ● Cradle ● AC Adapter (direct connection) By using the Cradle: The phone can be charged by using the cradle. You can also charge the battery by inserting the battery pack alone in the slot on the cradle.
  • Page 27 By using the AC Adapter: To charge the phone using the AC adapter: (1) Insert the AC adapter into an appropriate AC outlet. (2) Insert the AC adapter plug (mini USB) into USB connector of the phone. Info LED : Light red (Charging) : Light green (Charging is completed) USB connector AC Adapter...
  • Page 28 This page is for your notes.

  • Page 29: Basic Operation

    ASIC • TO POWER ON THE PHONE (STANDBY MODE) Press and hold the or more. The start screen appears and the Info LED flashes. After that your phone displays the following initial screen. A day of the week Current Date 9/2 Tue 08:27AM Mike Standby mode...

  • Page 30: To Answer A Call

    • TO ANSWER A CALL When receiving an incoming call, the display automatically changes to Incoming Call screen. 9/2 Tue 08:30AM CALLFROM MH240 To answer the call, press the To stop the ring without answering the call, press the key. When the calling party has been already registered in the Directory, the registered Name is displayed.

  • Page 31: To Redial (Last Number Redial)

    • TO REDIAL (LAST NUMBER REDIAL) You can make a call from the Outgoing Call History menu. A maximum of 50 calls can be automatically recorded. Registered number: Press the key while in Standby mode. Your phone displays Call History of Outgoing calls similar to the following.

  • Page 32: To Use A Headset

    • TO USE A HEADSET When a headset is inserted to the Headset connector, your phone is in headset call mode. Connect a headset to the phone. When the phone receives a call, you can hear ringing from the headset or speaker (configurable).

  • Page 33: Features

    EATURES This section explains how to use the features on your phone. • TO USE CONFERENCE (3-WAY CALL) You can establish a Conference call (3-way call). During an active call, press the hold the line. After hearing Second Dial Tone, enter the phone number that you want to join the call.

  • Page 34: To Use Courtesy Mode

    • TO USE COURTESY MODE You can set your phone to Courtesy Mode. When your phone is placed in this mode, your phone displays the Courtesy icon ( Press and hold the or more to enter Courtesy Mode. Press and hold the second or more to exit Courtesy Mode.

  • Page 35: Call History

    Your phone can record recent Call History in the following 3 lists up to 50 records for each list. You can open each list from the main menu or by pressing the associated key while in Standby mode. ● Outgoing Calls (Press the ●...

  • Page 36: To Make A Call From Call History

    • TO MAKE A CALL FROM CALL HISTORY Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “1.Call History” and then press the key. Press the key to select a history you want to view on the list and then press the key.
  • Page 37 Press the key to select an item you want to edit and then press the “Edit” soft key as required. In this example, Name and Group will be edited. Edit the data in edit display. Name Press the “OK” soft key and you will go back to the previous screen.
  • Page 38 Press the “Detail” soft key and then press key to select a phone number input area you want to add. Name 14581237654 If you save to an already existing entry, it will be overwritten by the new phone number. Press the “OK” soft key. Back...

  • Page 39: To Delete A Call History

    • TO DELETE A CALL HISTORY Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “1.Call History” and then press the key. Press the key to select a history you want to view on the list and then press the key.
  • Page 40 This page is for your notes.

  • Page 41: Directory

    IRECTORY You can save, edit, delete and view up to 500 record entries. • TO VIEW DIRECTORY Press the key while in Standby mode. Your phone displays as follows. 001.John 002.Ken 003.Kenny 004.Aaron Delete Detail Back By pressing the displaying the Directory, you can scroll through a list.
  • Page 42 To Search by Name: Press the key to select “2.Name” and then press the key. Enter a name or letter you want to search and then press the “OK” soft key. Name Your phone displays searched records. Name 002.Ken 003.Kenny Delete Detail To Search by Tel number:...
  • Page 43 Your phone displays searched records. 001.John 002.Ken 003.Kenny Delete Detail To Search by Company: Press the key to select “4.Others” and then press the key. Press the key to select “3.Company” and then press the key. Enter a Company name you want to search and then press the “OK”...

  • Page 44: To Setup Group

    • TO SETUP GROUP Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “2.Directory” and then press the key. Press the key to select “3.Group Setting” and then press the phone displays the Group Setting menu. GroupSetting 01.Default 02.Colleagues...

  • Page 45: To Add A New Entry

    To Setup Group Illumination: Press the key to select “3.Illumination” and then press the key. Press the key to select a Group Illumination you want and then press the “OK” soft key. Illumination 1.Disable 2.Default 3.Red 4.Green The display returns to the previous screen. By pressing the “On”...
  • Page 46 Press the key to select an Item you want to edit and then press the “Edit” soft key. Edit the selected item. In the following example, Tel #1 data is edited. Tel #1 14581233333 Press the “OK” soft key to write the data. The display returns to the previous screen.

  • Page 47: To Delete A Record

    • TO DELETE A RECORD You can delete a record from the Directory. Press the key while in Standby mode. Your phone displays as follows. 001.John 002.Ken 003.Kenny 004.Aaron Delete Detail Press the key to select a record you want to delete and then press the “Delete” soft key.

  • Page 48: To Edit An Entry

    • TO EDIT AN ENTRY You can edit a registered Directory. Press the key while in Standby mode. Your phone displays as follows. 001.John 002.Ken 003.Kenny 004.Aaron Delete Detail Press the key to select a record you want to edit and then press the “Detail” soft key.

  • Page 49: Speed Dial/Preset Dial

    PEED You can use Speed Dial assigned multi function keys (up to 8 entries) and Preset Dial assigned dial keys (up to 10 entries). • TO USE SPEED DIAL In Standby mode, press a function key ) to select one Speed Dial entry that has already registered in your phone.

  • Page 50: To Use Preset Dial

    • TO USE PRESET DIAL In Standby mode, press a dial pad ) to select one of the Preset Dial entries that have already registered in your phone. For example, press the key and hold for about 1 second to make a call to “D3.Tom” that is listed as D3 entry.
  • Page 51 When all of the editing is completed, press the “Back” soft key. Assign Dial F7.Bill D1.Aaron D2.Donald E. You can reach the Assign Dial menu by pressing the following keys. To go to the Assign Dial menu: Back...
  • Page 52 This page is for your notes.

  • Page 53: Setting

    ETTING Various settings such as Incoming Call, Talk, Display, Password, Password Lock, Keypad Mode and Date & Time can be modified as required on your phone. • RING VOLUME Factory Default: Middle You can adjust ring tone volume. Press the key while in Standby mode.

  • Page 54: Incoming Popup

    You can reach the Ring Tone menu by pressing the following keys. To go to the Ring Tone menu: • INCOMING POPUP Factory Default: Disable Your phone can display a popup window while ringing. Press the key while in Standby mode. Your phone displays the main menu.

  • Page 55: Private Call

    • PRIVATE CALL Factory Default: Allow Incoming Your can block incoming calls without Caller Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press the key. Press the key to select “1.User Setting”...

  • Page 56: Incoming Mode

    • INCOMING MODE Factory Default: Both You can select an incoming mode of Ring and Vibration. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press key. Press the key to select “1.User Setting”...

  • Page 57: Offhook Ring

    Auto Response: Press the key to select “2.Auto Response” and then press the Press the key to select an auto response times you want and then press the “OK” soft key. AutoResponse 3 times The display returns to the previous screen. You can reach the Auto Response of Headset menu by pressing the following keys.

  • Page 58: Rtp Alarm

    • RTP ALARM Factory Default: Disable Your phone can provide an alarm if RTP packet loss is suspected. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press the key.

  • Page 59: Call Volume

    • CALL VOLUME Factory Default: Middle You can adjust receiver volume. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press the key. Press the key to select “1.User Setting” and then press the key.

  • Page 60: Talk Start Vibration Setting

    • TALK START VIBRATION SETTING Factory Default: Disable Vibrator can work as talk start notification when a called party answers your call. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press the key.

  • Page 61: Back Light

    • BACK LIGHT Factory Default: 5sec You can adjust a timer until the LCD back light is off. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press the key.

  • Page 62: Language

    • LANGUAGE Factory Default: English The information on the LCD can be displayed in English or Japanese. You can select from the 7 languages by doing the following. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting”...

  • Page 63: Display Pattern

    • DISPLAY PATTERN Factory Default: Normal Your phone can display reversed LCD pattern. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press the key. Press the key to select “1.User Setting” and then press the key.

  • Page 64: Key Touch Tone

    • KEY TOUCH TONE Factory Default: Disable You can unmute or mute a tone that is provided when you press any key on your phone. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting”...

  • Page 65: Date

    • DATE Factory Default: 2008/ 1/ 1 (YYYY/MM/DD) You can adjust the date information of your phone as required. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press the key.

  • Page 66: Time Format

    • TIME FORMAT Factory Default: 12hour You can select a time format (12hours, 12hours (AM0:00) and 24hours) as required. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press the key.

  • Page 67: Ntp Setting

    • NTP SETTING Factory Default: Disable You can use NTP server in your network as required. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting” and then press the key. Press the key to select “1.User Setting”...

  • Page 68: Time Zone

    • TIME ZONE Factory Default: Depending on country You can set time offset in the range -12:00 to +14:00, which specifies time offset between GMT and your area. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting”...

  • Page 69: Information

    NFORMATION You can confirm the information of your phone such as Phone Number, IP address and MAC address. • TO DISPLAY STATUS You can confirm the Status of your phone by: ● SIP Status ● Wireless Status Press the key while in Standby mode. Your phone displays the main menu.

  • Page 70: To Display Ip Address

    • TO DISPLAY IP ADDRESS You can confirm the IP Address of your phone ● IP Address ● Net Mask ● Gateway ● DNS Primary ● DNS Secondary Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “0.Information”...

  • Page 71: Password Lock

    ASSWORD You can lock your phone against unauthorized usage. This is also useful for guarding your phone against inadvertent button presses. • TO USE MANUAL LOCK Press and hold the or more to lock your phone in Standby mode. Your phone is locked and displays a lock icon ( You can make an Emergency Call even if your phone is locked.

  • Page 72: To Use Outside Lock

    • TO USE OUTSIDE LOCK Factory Default: 0sec (Disable) When your phone is in out of service area, your phone is locked automatically expire timer you set. Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “5.Setting”...

  • Page 73: Prefix Dial

    REFIX You can add Prefix Dial to phone number when you make a call. • TO USE PREFIX DIAL You can use Prefix Dial as follows. To Make a Call by preset dialing: Enter the phone number and then press the “Prefix”...

  • Page 74: To Register Prefix No

    To Make a Call from Directory: Press the key to view Directory and then press the key to select a called party you want. Press the key and then press the _ key to select a phone number you want. Number 1.4581234444 2.1234555...

  • Page 75: Favorites

    AVORITES You can use favorites menu that you can customize. • TO USE FAVORITES Press the key while in Standby mode. Your phone displays the main menu. Press the key to select “#.Favorites” and then press the key. Press the key to select a menu you want to use and then press the “OK”...
  • Page 76 This page is for your notes.

  • Page 77: Menu List

    • MENU LIST The following shows the menu list of MH240 with the default values and remarks as required. Category MENU Menu Default 0.Information 1.Call History 2.Directory 3.Tools 4.Voice Mail 5.Setting #.Favorites Remarks This is main menu of the phone.
  • Page 78 Category 0.Information 1.Status 2.Wireless 3.IP Address 4.SIP 1.Call History 1.Missed 2.Outgoing 3.Incoming 4.All Delete 2.Directory 1.Search 1.Personal 1.Group 2.Name 3.Tel Number 4.Others 1.Memory ID 2.Alphabet 3.Company Menu Default SIP Status Not Registered / Registering / Registered Wireless Status Not Connected / Searching / Authenticating / Getting IP / Connecting / Connected...
  • Page 79 Category 2.Edit Name (alphanumeric characters) Group 01.Default to 20.Group20 Tel #1 (32 digits) Tel #2 (32 digits) Tel #3 (32 digits) Company Name (alphanumeric characters) Ring Tone 01.Disable 02.Default 03.Tone Type1 04.Tone Type2 05.Tone Type3 06.Tone Type4 07.Tone Type5 08.Tone Type6 09.Tone Type7 10.Tone Type8 11.Tone Type9...
  • Page 80 Category 3.Tools 1.Sitte Survey 1.AP Scan 2.Ping 4.Voice Mail 5.Setting 1.User Setting 1.Incoming Call 1.Ring Volume 2.Ring Tone 1.External Ring 2.Internal Ring 3.IM 4.Non-notification 3.Incoming Popup 4.Illumination 1.External Ring 2.Internal Ring 3.IM 4.Non-notification 5.Private Call 6.Vibrator 1.External Ring 2.Internal Ring 3.IM 4.Non-notification 7.Incoming Mode...
  • Page 81 Category 2.Talk 1.RTP Alarm 1.Disable 2.Enable 2.Hold Music 01.Tone Type1 02.Tone Type2 03.Tone Type3 04.Tone Type4 05.Tone Type5 06.Tone Type6 07.Tone Type7 08.Tone Type8 09.Tone Type9 10.Tone Type10 11.Tone Type11 12.Tone Type12 13.Tone Type13 14.Download1 15.Download2 16.Download3 3.Call Volume Large Middle Small 4.Handover Tone...
  • Page 82 Category 6.Keypad Mode 1.Key Touch Tone 1.Disable 2.Enable 2.Function Key 1.System 2.Speed Dial 3.Dial Key 1.Alphabet Search 2.Preset Dial 4.Assign Dial 1.Name (alphanumeric characters) 2.TEL (32 digits) 5.Speaker Monitor 1.Disable 2.Enable 7.Date & Time 1.Date (YYYY/MM/DD) 2.Time (HH:MM) 3.Time Format 1.12hour 2.12hour(AM0:00) 3.24hour...
  • Page 83 1.Download Files 2.Download Address 3.FTP Settings 1.User ID 2.Password 3.Folder 3.Maintenance 1.Config (Need Config Password) Password 1.Network Setting 2.SIP Setting 1.NEC-SETUP 2.<SIP Prof2> 3.<SIP Prof3> 4.<SIP Prof4> 5.<SIP Prof5> 6.<SIP Prof6> 7.<SIP Prof7> 8.<SIP Prof8> 9.<SIP Prof9> 3.Config Password Old Password New Password 2.Check...

  • Page 84: Character Code List

    • CHARACTER CODE LIST The following shows character code list when your phone is in edit mode. space Character Code List ” 10th 11th 12th 13th ’ &...

  • Page 85: Message Meanings And Suggestions

    ROUBLE • MESSAGE MEANINGS AND SUGGESTIONS The following shows the meanings and suggestions of messages that may be displayed on your phone. Message [Password] UnAuthorized! [Low Battery] Please charge it [Directory] No Input Name [Directory] Directory is Full [Handy Key Lock] Handy Key Lock Enabled [Handy Key Lock] Handy Key Lock Disabled...

  • Page 86: Tips And Suggestions

    • TIPS AND SUGGESTIONS The following shows suggestions on how to resolve MH240 operation problems. Confirm the following before making a call: ● Is the power ON? ● Is the battery charged? ● Is the Antenna icon ( ) displayed? Symptom Can not power on the phone…...

  • Page 87: Specifications

    AS/NZS CISPR 22 2006 PTC220 Radiocommunications (Electromagnetic Radiation-Human Exposure) Standard 2003 NZS 2772.1:1999 *Note In case of using a SIP server except SIP servers recommended by NEC, a connection test is required. Specifications C (Under charging : 0 to 35 *Note...

  • Page 88: Led Specifications

    • LED SPECIFICATIONS The following shows the LED specifications of MH240 and Cradle. Condition MH240 Power ON Status *Note1 1.Power OFF 2.Receiving a call *Note2 3.Holding a call *Note2 4.You have a voice mail *Note2 5.Charge Status Not charging Charging Charging is completed Any abnormality is found in the battery Power OFF Status...

  • Page 89: License

    This product uses the software of GPL/LGPL, and we will inform that the customer has the right of obtaining the source code of that software, the modification, and the re-distribution. Please contact the nearest NEC service office about the method of obtaining the source code.
  • Page 90 GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. The licenses for most software are designed to take away your freedom to share and change it.
  • Page 91 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;...
  • Page 92 code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component...
  • Page 93 the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
  • Page 94 If the program is interactive, make it output a short notice like this when it starts in an interactive mode: Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. This is free software, and you are welcome to redistribute it under certain conditions;...
  • Page 95 GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
  • Page 96 the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries.
  • Page 97 You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:...
  • Page 98 from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5.
  • Page 99 specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the "work that uses the Library"...
  • Page 100 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices.
  • Page 101 safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. <one line to give the library's name and a brief idea of what it does.> Copyright (C) <year>...
  • Page 102 This page is for your notes.
  • Page 104 Manufacture: 2-3, Kandatsukasa-cho, Chiyoda-ku, Tokyo 101-8532, Japan...

This manual is also suitable for:

Nec ip3na-8wv(usa)Mh240Nec ip3ph-8wv(eu)Ip3na-8wvIp3at-8wvIp3ph-8wv

Table of Contents