Page 1
VideoJet X SN Network Video Server Quick Installation Guide...
Page 2
| VideoJet X SN These instructions "Quick Installation Guide" refer to the units VideoJet X10 SN, VideoJet X20 SN and VideoJet X40 SN. The title shows a VideoJet X40 SN. In the drawings the VideoJet X40 SN is displayed standing for all versions.
Unpack the Box | en Unpack the Box – Please check the delivery for completeness and integrity. – Have your unit checked by Bosch Security Systems if you detect any damages! Bosch Security Systems Quick Installation Guide F.01U.076.988 | V3.0 | 2007.11...
| Connect the Camera(s) VideoJet X SN Connect the Camera(s) – VideoJet X10 SN: Connect the camera with the Video In socket. – VideoJet X20 SN: Connect one camera to each, the Video In 1 socket and the Video In 2 socket.
VideoJet X SN Connect the Audio Components | en Connect the Audio Components – Use the Audio In and Audio Out jack sockets for audio line connections. Bosch Security Systems Quick Installation Guide F.01U.076.988 | V3.0 | 2007.11...
| Alarm and Relay Connections VideoJet X SN Alarm and Relay Connections – Connect the alarm switches to the corresponding terminals. – Connect the relay connections to the corresponding terminals. F.01U.076.988 | V3.0 | 2007.11 Quick Installation Guide Bosch Security Systems...
VideoJet X SN Connect to the Network | en Connect to the Network – Connect the unit to the network via the ETH socket. Bosch Security Systems Quick Installation Guide F.01U.076.988 | V3.0 | 2007.11...
– Connect the power supply unit to the power outlet. NOTICE! Power supply units are not included in delivery. You can order power supply units in different variations at Bosch Security Systems. F.01U.076.988 | V3.0 | 2007.11 Quick Installation Guide...
VideoJet X SN Configure the IP Address | en Configure the IP Address – Install the program Configuration Manager from the CD- ROM provided. If the CD-ROM does not start automatically doubleclick the index.htm file. – Start the Configuration Manager when installation is completed.
| Test the Configuration VideoJet X SN Test the Configuration – Launch the Web browser and enter the IP address of the unit (e.g. http://192.168.0.40) to check that the unit is properly connected to the network. – Use the links at the top of the Web pages to navigate.