4 Replacement Procedures
4.6
Keyboard
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to figures 4-10 to 4-12.
CAUTION: When removing the keyboard, hold the edge of it. Do not touch the key top.
Otherwise, the key top may drop.
1. Remove the following screw on the bottom.
M2.0×6.0B
M2.0x6.0B BIND
Figure 4-10 Removing the screw (fixing keyboard)
2. Turn the computer face up and open the display.
3. Lifting up the speaker cover (S) from the slit side and remove it.
4. Slide the speaker cover (L) toward the arrow direction and remove it.
5. Remove the following screws securing the keyboard.
M2.0×3.0S
M2.0×4.0B
M2.0×3.0S
PORTEGE M300 Maintenance Manual (960-504)
BIND screw
S-THIN FLAT BIND screw
or
LH STICK
S-THIN FLAT BIND screw
4.6 Keyboard
×1
×2
×1 (Left side)
×1 (Right side)
4-19