4.4 HDD
4.4
HDD
Removing the HDD
To remove HDD, follow the steps below and refer to figures 4-7 and 4-8.
CAUTION: When handling the HDD, do not press the HDD from the top and bottom
surface. Pressing HDD may causes data and device destruction.
1. Turn the computer upside down.
2. Loosen the following screw (with e-ring) and remove the HDD slot cover.
3. Lift up the HDD assembly from screw hole side.
4. Disconnect the HDD assembly carefully from the connector of the HDD FPC.
HDD slot cover
Screw (e-ring)
HDD assembly
4-14
Figure 4-7 Removing the HDD assembly
4 Replacement Procedures
HDD FPC
PORTEGE M300 Maintenance Manual (960-504)