Auto Pc Adjustment - Sanyo PLC-XU115 Owner's Manual
Hide thumbs
Also See for PLC-XU115:
- Service manual (128 pages) ,
- User manual (78 pages) ,
- Owner's manual (78 pages)
Table of Contents
Advertisement
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Direct Operation
The Auto PC adjustment function can be operated directly
by pressing the AUTO PC button on the remote control.
Menu Operation
Auto PC Adj .
Press the MENU button to display the On-Screen
1
Menu. Use the Point
frame pointer to the PC Adjust Menu icon.
Use the Point
pointer to Auto PC Adj. and then press the SELECT
button twice.
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can
be stored in the projector. Once the parameters are stored,
the setting can be done just by selecting a Mode (1–5) in the
PC System Menu (p.32). See also "Store" on page 35.
Notes:
• Fine sync, Total dots, Horizontal and Vertical position of
some computers cannot be fully adjusted with the Auto
PC Adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required (pp.34–35).
• The Auto PC Adjustment cannot be operated when 480i,
575i, 480p, 575p, 720p,1035i, or 1080i is selected in the
PC System Menu (p.32), or when the signal is coming
from the DVI-terminal.
Downloaded From projector-manual.com Sanyo Manuals
buttons to move the red
◄►
buttons to move the red frame
▲▼
Remote Control
AUTO PC button
PC Adjust Menu
PC Adjust Menu icon
Move the red frame pointer
to Auto PC Adj. and press
the SELECT button.
"Please wait..." appears
while the Auto PC
adjustment is in process.
Computer Input
Advertisement
Table of Contents
