Video System Selection - Sanyo PLC-XU115 Owner's Manual
Hide thumbs
Also See for PLC-XU115:
- Service manual (128 pages) ,
- User manual (78 pages) ,
- Owner's manual (78 pages)
Table of Contents
Advertisement
Video Input
Video System Selection
Press the MENU button to display the On-Screen
1
Menu. Use the Point
frame pointer to the AV System Menu icon.
Use the Point
pointer to the desired system and then press the
SELECT button.
Video or S-Video
Auto
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
PAL/SECAM/NTSC/NTSC ./PAL-M/PAL-N
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Component
Auto
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
Note:
• The AV System Menu cannot be selected when selecting RGB (Scart).
Downloaded From projector-manual.com Sanyo Manuals
buttons to move the red
◄►
buttons to move the red arrow
▲▼
AV System Menu (Video or S-Video)
AV System Menu icon
The selected system is
displayed.
Move the pointer to the
desired system and press
the SELECT button.
AV System Menu (Component)
AV System Menu icon
The selected system is
displayed.
Move the pointer to the
desired system and press
the SELECT button.
Advertisement
Table of Contents
