Computer System Selection - Sanyo PLC-XU4000 Owner's Manual

Hide thumbs Also See for PLC-XU4000:

Service manual (110 pages)

Owner's manual (78 pages)

Brochure & specs (2 pages)

Table Of Contents

Table of Contents

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC

Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format

and tunes to project a proper image without any additional settings.

(Signal formats provided in this projector are shown on page 71.)

One of the following messages may appear when:

The projector cannot recognize the connected

Auto

signal conforming to the provided PC Systems.

Auto is displayed on the System Menu box

and the Auto PC Adjustment function works

to display proper images. If the image is not

projected properly, a manual adjustment is

required (pp.31-32).

There is no signal input from the computer.

-----

Check the connection between your computer

and the projector. (See "Troubleshooting" on

pages 65-66.)

The preset system is manually adjusted in the

Mode 1

PC Adjust Menu. The adjusted data can be

stored in Mode 1–10 (pp.31-32).

PC Systems provided in this projector is chosen.

SVGA 1

The projector chooses a proper system provided

in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

Press the MENU button to display the On-Screen

Menu. Use the Point

then press the Point

Use the Point

press the Point

Use the Point

and then press the SELECT button.

Downloaded From projector-manual.com Sanyo Manuals