Input Source Selection (Component, Rgb Scart) - Sanyo PLC-XU4000 Owner's Manual
Hide thumbs
Also See for PLC-XU4000:
- Service manual (110 pages) ,
- Owner's manual (78 pages) ,
- Brochure & specs (2 pages)
Table of Contents
Advertisement
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or
press the COMPUTER 1 or the COMPONENT button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
then press the Point
3
Use the Poin
RGB(Scart) and then press the SELECT button.
Component
RGB (Scart)
Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.47).
Downloaded From projector-manual.com Sanyo Manuals
Input Source Selection (Component, RGB Scart)
Direct Operation
COMPUTER 1 button
Computer 1(RGB)
Computer 1(Scart)
COMPONENT button
Computer 1
(Component)
Menu Operation
buttons to select Input and
▲▼
or the SELECT button.
►
buttons to select Computer 1 and
▲▼
button.
►
buttons to select Component or
t▲▼
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
Top Control
INPUT button
(Component) / (RGB(Scart))
Input Menu
Video Input
Computer 1(RGB) /
Computer 2(RGB)
Video
S-video
39
Advertisement
Table of Contents
