■
When cleaning the TV, remove the mains plug
●
Cleaning an energized TV may cause electric shock.
■
Remove the mains plug from the wall socket when the TV is not in use for a
prolonged period of time
●
This TV will still consume some power even in the Off mode, as long as the mains plug is still connected.
■
Do not block the rear air vents
●
Adequate ventilation is essential to prevent failure of electronic components.
●
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table
cloths and curtains.
●
We recommend that a gap of at least 10 cm is left all
around this TV even when placed inside a cabinet or
between shelves.
●
When using the stand, keep the space between the
bottom of the TV and the surface where the TV is set.
●
If stand is not used, ensure the vents in the bottom of
the TV are not blocked.
■
Do not apply strong force or impact to the display panel
●
This may cause damage resulting in injury.
■
Do not expose your ears to excessive volume from the headphones
●
Irreversible damage can be caused.
Notes
■
Auto power standby function
●
The TV will automatically go to Standby mode in the following conditions:
•
no signal is received and no operation is performed for 30 minutes in Analogue TV mode
•
"Off Timer" is active in the Setup Menu (p. 20)
•
no operation is performed for the period selected in "Auto Standby" (p. 23)
■
Keep the TV away from these types of equipment
●
Electronic equipment
In particular, do not place video equipment near the TV. (Electromagnetic interference may distort images / sound.)
●
Equipment with an infrared sensor
This TV also emits infrared rays. (This may affect operation of other equipment.)
■
Transport only in upright position
Maintenance
First, remove the mains plug from the socket outlet.
Regular care:
Gently wipe the surface of the display panel, cabinet, or stand by using a soft cloth to clean the dirt or fingerprints.
For stubborn dirt:
Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then wring
the cloth and wipe the surface. Finally, wipe away all the moisture.
Caution
●
Do not use a hard cloth or rub the surface too hard. This may cause scratches on the surface.
●
Take care not to subject the TV's surfaces to water or detergent. A liquid inside the TV could lead to product
failure.
●
Take care not to subject the surfaces to insect repellent, solvent, thinner, or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
●
The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch
the surface with your fingernail or other hard objects.
●
Do not allow the cabinet and stand to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.
Caution
Display panel, Cabinet, Stand
Mains plug
Minimum distance
10
10
10
10
(cm)
5