Table of Contents
Advertisement
8-172
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
AP7131N>admin(system.access)>set
Description:
Defines the permissions to access the access point applet, CLI, SNMP as well as defining their timeout values.
Syntax:
set applet
app-timeout
ssh
auth-timout
inactive-timeout
console-timeout
rlogin
snmp
admin-auth
server
secret
mode
msg
Example:
admin(system.access)>set applet slan 1 enable
CliAuditLog - User:'admin' Command:'set applet slan 1 enable' Status:'success'
From:'Ssh-172.16.10.10' MU_Mac:'NULL'
admin(system.access)>
admin(system.access)>set rlogin 1
CliAuditLog - User:'admin' Command:'set rlogin 1' Status:'success' From:'Ssh-
172.16.10.10' MU_Mac:'NULL'
admin(system.access)>
admin(system.access)>set console-timeout 550
CliAuditLog - User:'admin' Command:'set console-timeout 550' Status:'success'
From:'Ssh-172.16.10.10' MU_Mac:'NULL'
admin(system.access)>
For information on configuring access point access settings using the applet (GUI), see
slan
Enables/disables applet HTTPS access parameters from LAN.
swan
Enables/disables applet HTTPS access parameters from WAN.
<minutes>
Sets the applet timeout. Default is 300 Mins.
Sets the CLI SSH access parameters.
<seconds>
Disables the radio interface if no data activity is detected after the interval
defined. Default is 120 seconds.
<minutes>
Inactivity interval resulting in the AP terminating its connection.
Default is 120 minutes.
<seconds>
Sets the maximum inactivity interval allowed for console session. Set the
interval between 60-600 seconds.
Defines the number of times a remote login failure allowed for SSH/GUI.
Sets the threshold between 1-3.
Sets SNMP access parameters for the AP's LAN and WAN ports.
Designates a Radius server is used in the authentication verification.
<ip>
Specifies the IP address the Remote Dial-In User Service (RADIUS) server.
<pw>
Defines the shared secret password for RADIUS server authentication
(upto 31 characters).
<mode>
Enables/disables the access point message mode.
Defines the access point login message text (up to 1024 characters).
Configuring Data Access on page
4-14.
Advertisement
Table of Contents
