Table of Contents
Advertisement
B-2
Motorola Solutions AP-7131N-FGR Access Point Product Reference Guide
B.1 Configuring an IPSEC Tunnel and VPN FAQs
The access point has the capability to create a tunnel between an access point and a VPN endpoint.
The access point can also create a tunnel from one access point to another access point.
The following instruction assumes the reader is familiar with basic IPSEC and VPN terminology and
technology.
•
Configuring a VPN Tunnel Between Two Access Points
•
Configuring a Cisco VPN Device
•
Frequently Asked VPN Questions
B.1.1 Configuring a VPN Tunnel Between Two Access Points
The access point can connect to a non-AP device supporting IPSec, such as a Cisco VPN device -
labeled as "Device #2".
For this usage scenario, the following components are required:
• 2 access points
• 1 PC on each side of the access point's LAN.
To configure a VPN tunnel between two access points:
1. Ensure the WAN ports are connected via the internet.
2. On access point #1, select
3. Click
Add
4. Enter a tunnel name (tunnel names do not need to match).
WAN
to add the tunnel to the list.
->
VPN
from the main menu tree.
Advertisement
Table of Contents
