Table of Contents
Advertisement
12.2.3.
Via Ethernet (TCP/IP)
SICAM TOOLBOX II and SICAM TM are connected via Ethernet (TCP/IP).
For this, the master control element must be fitted with additional SIM's. For details refer to
section 4.2;
Configuring Master Control Element with Serial Interface Modules
Ethernet (TCP/IP)
Attention
A first initialization of the automation unit is not possible with this method (IP-addresses, subnetmask).
This is only possible via the TB-interface.
SICAM TM, Installation
DC6-015-2.04, Ausgabedatum 10.2014
SICAM TOOLBOX II
Designation
SM-2558 Ethernet-Interf. 1x100TX
+ 1 serial interface optional
Patch cable CAT5 (4x2) AWG26/7
(used for cabinet-internal wirings up
to 10m)
Patch cable CAT5 (4x2x0.5) AWG24
(used for cabinet-external wirings up
to 100m)
Parameter Setting Preparation
(SIM).
SICAM TM
1
2
3
4
5
6
Communication Interface
M-PRE/1 SI1 (Et0) X8
Item Number/ MLFB
BC2-558
6MF10130CF580AA0
T41-255 (1m)
6MF13040BC550AA0
T41-251 (2m)
6MF13040BC510AA0
T41-252 (3m)
6MF13040BC520AA0
T41-253 (5m)
6MF13040BC530AA0
T41-254 (10m)
6MF13040BC540AA0
-
107
Hide quick links:
Advertisement
Table of Contents
