Related Manuals for Panasonic WV-NW470S
Summary of Contents for Panasonic WV-NW470S
-
Page 1: Operating Instructions
Colour CCTV Camera Operating Instructions WV-NW470S Model No. WV-NW474SE Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. - Page 2 We declare under our sole responsibility that the product to which this declaration relates is in conformity with the stan- dards or other normative documents following the provisions of Directives EEC/73/23 and EEC/89/336. Wij verklaren als enige aansprakelijke, dat het product waarop deze verklaring betrekking heeft, voldoet aan de volgende normen of andere normatieve documenten, overeenkomstig de bepalingen van Richtlijnen 73/23/EEC en 89/336/EEC.
-
Page 3: Table Of Contents
PREFACE ... 4 Features ... 4 System Requirements ... 4 Trademarks ...4 Document Convention ... 5 PRECAUTIONS ... 6 MAJOR OPERATING CONTROLS & THEIR FUNCTIONS ... 7 INSTALLATION ... 9 ■ Installation Plans & Preparations ... 9 ■ Mounting the Camera ... 10 ■... -
Page 4: Preface
PREFACE Panasonic introduces the WV-NW470S and WV-NW474SE colour cameras for remote video surveillance through net- work connections. The camera incorporates a manual pan, tilt, and azimuth table in a compact dome, besides such essential functions as high sensitivity, wide dynamic range, video motion detection, and so forth. -
Page 5: Document Convention
• Ethernet is a registered trademark of Xerox Corporation. • Other names of companies and products contained in these operating instructions may be trademarks or registered trademarks of their respective owners. • Distributing, copying, disassembling, reverse com- piling, reverse engineering, and also exporting in violation of export laws of the software provided with this product, is expressly prohibited. -
Page 6: Precautions
PRECAUTIONS 1. This product should be installed and connected in conformity with local codes by qualified serv- ice personnel or system installers. 2. Use a class 2 power source supplying 24 V AC. 3. To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) to connect the power supply to the camera. -
Page 7: Major Operating Controls & Their Functions
MAJOR OPERATING CONTROLS & THEIR FUNCTIONS q Tilting lock screw Fixes the tilting position. w Panning table Adjusts the panning angle of the camera. e Azimuth adjuster Adjusts the azimuth angle to level the image. r Pan lock screw Fixes the panning position. t Zoom lock lever Fixes the zoom position after adjustment. - Page 8 Alarm in: Door switch Alarm out: Buzzer AUX out: Illumination GND: Signal ground @4 Power cable Supplies power to the camera. Upside Sync Down OFF* INT* @5 Camera mounting bracket @6 Cable access hole @7 Sideway cable exit WV-NW474SE WV-NW470S...
-
Page 9: Installation
INSTALLATION ■ Installation Plans & Preparations supplied camera-mounting installed directly on the wall/ceiling or on a procured junction box. On the bottom of the bracket, there are four 6.5 mm screw holes and six 5.5 mm holes. Use the appropriate holes matching to the installation surface. -
Page 10: Mounting The Camera
■ Mounting the Camera Disassembling the Camera 1. Remove the dome cover by loosening the three tamper-proof screws with the supplied bit. 2. Remove the two red-coloured screws provided for transport protection with a Philips screwdriver. Another red screw Note: Prior to installation, discharge static electricity by placing your hands on a metallic surface. -
Page 11: Connections
(approx.) -11- To network To Video IN (CAMERA IN) To peripherals WV-NW474SE For optional heater WV-NW470S Function Note 220 V - 240 V AC 9.9 W (camera) Live 220 V - 240 V AC 18.9 W (with heater) Neutral (0.22mm... -
Page 12: Image Adjustment
● Video Output Connection Connect the video output cable to the monitor or other system device with the procured coaxial cable. The maximum extensible length is shown in the table. Type of RG-59/U RG-6/U coaxial cable (3C-2V) (5C-2V) Recommended maximum (ft) 1650 cable length... - Page 13 3. Zoom • Unlock the zoom lever. • Move the lever to adjust the zoom. • Lock the lever. Focus lock lever Zoom lock lever TELE 4. Focus • Unlock the focus lever. • Move the lever to adjust the focus. •...
-
Page 14: Network Connection Types
■ Network Connection Types Prior to connections, specify the connection type and prepare relevant devices and cables. Notes: • We recommend that you use connection type 1 or type 2 when setting up the network address of the camera. • Be sure to unplug or switch all the devices off, then start connections. -
Page 15: Preparations For Network Connections
PREPARATIONS FOR NETWORK CONNECTIONS ■ Network Setup of Your PC To set up the network of the PC, first change the TCP/IP settings of the PC to match them to the default settings of the camera. The following are the default network settings of the camera. -
Page 16: Network Setup Of The Camera
Internet traffic congestion. ■ Network Setup of the Camera ● Using Panasonic IP Setup Software Set up the network of the camera using the "Panasonic IP Setup" software included on the CD-ROM provided with the camera. Notes: •... - Page 17 • If DHCP is enabled although there is no DHCP server in the network, check "Disable" for DHCP in the "Panasonic IP Setup" window. • If DHCP is enabled, and the DHCP server has not assigned an IP address yet, "0.0.0.0" is dis- played for the IP address.
- Page 18 5. Enter "admin" in the user name line. Note: The default setting is "admin". The administra- tor should change the user name and password in the User Setup menu. 6. Click the [OK] button. The "Setup Menu" window opens. 7. Click the [Network] button. The "Network Setup" win- dow appears.
-
Page 19: Prior To Camera Setup
PRIOR TO CAMERA SETUP This section describes the camera setup procedures common to accesses from the PC and from the camera. ■ Buttons Used for Setup Press the buttons inside the camera, or click the but- tons on the computer display. Each button is assigned functions in the setup as follows. - Page 20 4. Click the Menu ON button to overlay the ** SET UP ** menu on the camera image. The cursor is highlighted on the window. 5. Move the cursor to SETUP DISABLE if it is dis- played, or skip to step 7 if ENABLE is displayed. 6.
-
Page 21: Setup Menu Tree
■ Setup Menu Tree ** SET UP ** ** CAM SET UP ** ** NETWORK SETUP ** CAMERA ID CAMERA ID ** ALC CONT ** SHUTTER SENS UP ATW1 SYNC ATW2 WHITE BAL ** AWC ** MOTION DET ** MOTION DETECT ** MENU/DIP SW UPSIDE DOWN ** SPECIAL **... -
Page 22: Setting Procedures
SETTING PROCEDURES The following pages describe setting operations from the camera. For accessing from the PC, interpret these instructions as follows. Function Opening the camera setup menu Closing the camera setup menu Opening a more detailed setup menu Returning to the previous menu Opening the special menu Resetting the parameter of an item Resetting all the settings... - Page 23 To edit the CAMERA ID 1. Move the cursor to CAMERA ID. The factory default setting is OFF. 2. Press [SET]. The CAMERA ID menu appears. The cursor on the letter "0" is highlighted. 3. Move the cursor to the character you want to edit by pressing [Left]/[Right]/[Up]/[Down].
- Page 24 3. Move the cursor to the area where backlight is bright and press [SET] to mask that area. The mask turns to white. (When the cursor is moved on an area that has already been masked, the mask and cursor start blinking.) Blinking 4.
- Page 25 6. Synchronization Setting (SYNC) There are three synchronization modes: INT (internal), LL (line-lock), and VD2 (vertical drive). You can select the internal or line lock mode in the menu setup, but you cannot select VD2. The VD2 signal is supplied from an external device e.g., a Video Multiplexer, by being multiplexed on a coaxial cable, and it overrides the internal and line-lock mode even when these modes are...
- Page 26 Therefore, when the camera is not used in a Panasonic Intelligent CCTV System, select OFF to prevent the above from occurring. -26- ** MOTION DETECT ** LEVEL ...I...
- Page 27 • The camera will deactivate the detector for a few minutes after the power of the camera is turned on or the BW setting in the Special Menu is set to something other than OFF. • The motion detection function is not designed specifically for prevention of theft, fire, etc.
- Page 28 7. Press [Up] or [Down], [Left] or [Right] to change the angular field of view. 8. To return to the EL-ZOOM setting menu, press [SET]. 10-6. BW This function lets you switch from colour to black-and- white picture automatically in low light conditions such as at night.
-
Page 29: Network Setup (Network Setup)
■ Network Setup (NETWORK SETUP) Set up network parameters when connecting the 10/100BASE jack with a network. Notes: • Access the setup menu from the PC to use the DHCP or DNS server, because these settings are not included in this window. •... -
Page 30: Initializing
INITIALIZING You can reset the following data back to the factory default settings. Camera Setup Setup Menu (PC oriented) HTML files ■ Initializing the Camera Menu • Move the cursor to CAMERA RESET. • Hold down [Left], [Right], and [SET] buttons simulta- neously for 2 seconds on the camera, or click the All Reset button on your computer display. -
Page 31: Troubleshooting
TROUBLESHOOTING Symptom No picture is displayed. Cannot access the camera from the browser. HTML documents are not displayed. What to do • Is the 24 V AC or 220 V - 240 V AC cable firmly connected? • Is the video cable or network cable connected properly? •... -
Page 32: Prevention Of Blooming And Smear
PREVENTION OF BLOOMING AND SMEAR When the camera is aimed at a bright light, such as a spotlight, or a surface that reflects bright light, smear or blooming may appear. Therefore, the camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blooming. -
Page 33: Standard Accessories
OFF (Open or 4 V DC – 5 V DC)/ ON (≤ 1 V 50 mA) Day/Night In: Pulled-up to 5 V DC, OFF (Open) / ON (0 V 0.2 mA) 24 V AC 50 Hz (WV-NW474SE), 220 V - 240 V AC 50 Hz (WV-NW470S) 24 V type: 8.6 W (Camera) 12.1 W (Optional heater unit) -
Page 34: Appendix
APPENDIX ■ Optional Heater Unit WV-CW3HE ● Introduction Installing this heater unit enables the camera to operate under in a low-temperature environment of –30 °C (–22 °F). The heater turns on automatically when the temperature inside the camera drops below +10 °C (50 °F) and turns off when it rises. - Page 35 Printed in Japan Gedruckt in Japan Imprimé au Japon Impreso en Japón Stampato in Giappone 2003 © Matsushita Electric Industrial Co., Ltd. All rights reserved. N0803-1103 3TR001929BAA 在日本印刷...