Gpon Onu Capability Set - Huawei SmartAX MA5603T Configuration Manual
Access module
Hide thumbs
Also See for SmartAX MA5603T:
- Hardware description (977 pages) ,
- Hardware description (65 pages)
Table of Contents
Advertisement
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Commissioning and Configuration Guide
Scenario
Enterprise
PRA PBX
access
Enterprise
E1/T1 unified
access
Enterprise
E1/T1 unified
access (OLT
Cascading)
13.1.3 GPON ONU Capability Set
This topic describes the supported hardware capability, features, and network position of ONUs
on a GPON private line access network.
In FTTx V100R013C00, the MA5612, MA5628 and MA5673 mainly apply to the large-sized
enterprise access service.
Issue 01 (2014-04-30)
Scenario Description
ONUs access PRA PBX
services through E1 lines.
The OLT transmits the data to
the upper NGN/IMS,
achieving the VoIP-based
PRA voice service.
ONU accesses enterprise E1
service through standardized
hardware ports, and transmits
data to the OLT over the
GPON line after performing
structure-agnostic time
division multiplexing over
packet (SAToP)
encapsulation on the service.
After receiving the signals,
the OLT restores E1 signals
and transmits the signals to
the SDH network.
ONU accesses the E1/T1
service in SAToP mode, and
transmits the service to the
OLT at the local site
(OLT_B) over the GPON
line. OLT_B transparently
transmits the service to
another OLT with SDH
resources (OLT_A) through
GE/10GE ports.
Table 13-1
shows the ONU capability set.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
13 FTTO Configuration (Large-sized Enterprise Access)
Typical OLT
Configuration
(Main Control
Board+Service
Board
+Upstream
Board)
SCUN+GPBC/
GPBD+GICK/
X2CS
SCUN+GPBC/
GPBD+EDTB
OLT_A: SCUN
+GPBC/GPBD
+EDTB+GICK/
X2CS
OLT_B: SCUN
+GPBC/GPBD
+GICK/X2CS
Applicable ONU
MA5612
MA5612, MA5628
MA5612, MA5628
1255
- Quick Links:
- Commissioning Introduction
Hide quick links:
Advertisement
Table of Contents
