Instructions; Hmi Features; Front Panel; Display - ABB REM 610 Operator's Manual
Motor protection relay
Hide thumbs
Also See for REM 610:
- Technical reference manual (158 pages) ,
- Operator's manual (68 pages) ,
- Product manual (36 pages)
Table of Contents
Advertisement
1MRS 752264-MUM
3.
3.1.
3.1.1.
3.1.2.
3.1.2.1.
Motor Protection Relay
Operator's Manual
Instructions
HMI features
Front panel
The front panel of the protection relay includes:
• an alphanumeric 2 x 16 characters' LCD with backlight and automatic contrast
control
• three indicator LEDs (green, yellow, red)
• 8 programmable indicator LEDs (red)
• an HMI push-button section with four arrow buttons and buttons for clear/cancel
and enter
• an optically isolated serial communication port with an indicator LED.
Fig. 3.1.1.-1
Front view of REM 610
1. LCD
2. HMI push-button section
3. Programmable indicator LEDs (red)
4. Indicator LEDs:
• Left: Ready (green)
• Centre: Start/Alarm (yellow)
• Right: Trip (red)
5. Indicator LED for front communication
6. Front communication port (infrared)
Display
Display test at power up
When connecting the auxiliary voltage to the relay:
1. The backlight will be turned on after the relay has performed the internal
power-up tests and entered into the protection mode.
2. The display will be tested by inverting it for approximately three seconds, see
Fig. 3.1.2.1.-1. In case a restart inhibit indication is displayed, the display test
will not be run at power up.
FrViewREM610_b
REM 610
9
- Quick Links:
- Testing of Protection Functions
Hide quick links:
Advertisement
Table of Contents
