Table of Contents
Advertisement
(b)New HMI
Print description
Main Ink Tank Too Full
The ink level in the main ink tank is too high.
Cause 1. The valve (MV2) or valve (MV7) is faulty.
Operating Time
Ink Presure
（Standard Value ：
2. The High Level sensor in the main ink tank is faulty.
100
h
Solution 1. Drain proper amount of ink in the main ink tank.
2. Check the High Level sensor.
Print Count
3. Contact your local distributor.
1.000
Reset
HOME
OPEN
● If the message prompts the guidance, HELP will be shown on upper right corner.
● When HELP is pressed, the guidance for the fault/warning will appear.
Print description
Message name[ ]
1. Drain proper amount of ink in the main ink tank.
−
Ink operating time １００(hours)
Cumulative op. time １００(hours)
Print count １０００(prints)
Ink pressure ０．０００(MPa；standard value:０．２５０)
Change
Select
message
message
● When Back is pressed, the guidance will be closed and the message will be shown again.
● The messages listed below have guidance.
No.
Type
1
2
3
Fault
4
5
×
STOP
Fault
Makeup
Ink
0.255
）
０． ０ ０ ０
ＭＰ ａ
SAVE
ADJUST
EDIT
[Stop ]
Current user ID : user2
Makeup
Overwrite
Adjust print
message
parameters
Main Ink Tank Too Full
Ink Drop Charge Too Low
Deflection Voltage Leakage
No Ink Drop Charge
Ink Drop Charge Too High
2015.07.07 12:45
OFFLINE
ID:User2
?
×
No.002
−
100%
＋
TEST
START PRINTING
STARTUP
Close
SETTINGS
LOGIN
2015.07.07 12:45
Com=0
Manual
Startup
＋
Inter-
laced
Ink
Print count
reset
Back
Operation
Menu
management
Message
●Display when warning or fault was generated 9-4
Displays the guidance.
Hide quick links:
Advertisement
Table of Contents
Related Manuals for Hitachi IJ UX
Related Products for Hitachi IJ UX
- Hitachi IJ PH
- Hitachi IJ RX2
- Hitachi IJ UX2
- Hitachi IPJ-AW250N
- Hitachi Innovate iPJ-AW250NM
- Hitachi IC25N040ATCS04-0 - Travelstar 40GN 40GB UDMA/100 4200RPM 2MB 2.5" IDE Hard Drive
- Hitachi IC25N080ATMR04-0 - 3E034 - Dell 80GB Laptop Hard Drive
- Hitachi IC25N040ATMR04-0 - Travelstar 40GB Laptop Hard Drive 9.5mm 2.5 Inch Notebook HDD