Related Manuals for jcb JCB-ROS330
Summary of Contents for jcb JCB-ROS330
- Page 1 Safety and operating manual Random Orbital Sander JCB-ROS330 Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
-
Page 3: General Power Tool Safety Warnings
Unmodified plugs are tired or under the influence and matching outlets will reduce of drugs, alcohol or medication. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... -
Page 4: Power Tool Use And Care
If devices are provided for the and any other condition that may Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... - Page 5 Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
- Page 6 21. Where possible, seal off the working area to contain the dust for later removal. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
- Page 7 To reduce the risk of injury, user must read instruction manual Wear ear protection Wear eye protection Wear dust mask Double insulation RCM marking Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
-
Page 8: Component List
3. VARIABLE SPEED CONTROL 4. CYCLONIC DUST BOX 5. DUST EXTRACTION OUTLET 6. LATCHING LEVER 7. BASE PLATE 8. SANDING SHEET (See B) Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... -
Page 9: Technical Data
Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... -
Page 10: Intended Use
(See A) To remove the sandpaper, lift one corner of the paper and pull off from the sanding plate. (See B) Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... - Page 11 “I”. To stop your sander, depress the protective cover indicated by the mark “0”. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
-
Page 12: Sanding Surfaces
Sand paper (grain size), the speed of the sanding plate and the application pressure. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... -
Page 13: Rough Sanding
Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... -
Page 14: Maintenance
6. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... -
Page 15: Troubleshooting
Replace and try again. 4. If a fault can not be rectified return the sander to an qualified person for repair. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... - Page 16 For claims under this JCB warranty, please declarations, receipts or reports (e.g. from your contact the JCB Helpline. To make a claim you doctor), depending on the loss or damage. will need to provide proof of purchase in the form...