Related Manuals for jcb JCB-SS280
Summary of Contents for jcb JCB-SS280
- Page 1 Safety and operating manual 280W Finishing Sander JCB-SS280 Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
-
Page 3: General Power Tool Safety Warnings
(grounded) are tired or under the influence power tools. Unmodified plugs of drugs, alcohol or medication. and matching outlets will reduce Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... - Page 4 If devices are provided for the and any other condition that may Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
- Page 5 7. When an extension cable is required you must ensure it has the correct ampere rating for your power tool and is in a safe Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
- Page 6 20. Do not allow people to enter the working area without wearing a dust mask. 21. Where possible, seal off the working area to contain the dust Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
- Page 7 To reduce the risk of injury, user must read instruction manual Wear ear protection Wear eye protection Wear dust mask Double insulation RCM marking Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
-
Page 8: Component List
6. BASE PLATE 7. PAPER PUNCH 8. CLAMP LEVER 9. SANDING PAPER CLAMP 10. MOTOR HOUSING 11. MESH SANDING SHEET (See A) Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... -
Page 9: Technical Data
Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... - Page 10 Sanding paper without holes, e. g. from rolls or by the meter, can be punctured with the paper punch for use with dust extraction. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
- Page 11 1. ON /OFF SWITCH Depress to start and release to stop your tool. 2. SWITCH LOCK-ON BUTTON Depress on/off switch (1) then lock- Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
- Page 12 8700~ veneer 11000 Sanding 7600~ aluminium 11000 Derusting 9800~ metal 12000 Sanding 9800~ metal and 12000 steel Sanding 6500~ plexiglass 8700 Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
- Page 13 6. ORBITAL SANDING Your sander operates in small circular rotations which allow efficient material removal. Operate Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028...
-
Page 14: Maintenance
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... -
Page 15: Troubleshooting
Replace and try again. 4. If a fault can not be rectified return the sander to an qualified person for repair. Positec Australia Pty Limited Unit 15, 23 Narabang Way, Belrose 2085 NSW Australia www.jcb-tools.com Customer Helpline 1300 889 028... - Page 16 For claims under this JCB warranty, please declarations, receipts or reports (e.g. from your contact the JCB Helpline. To make a claim you doctor), depending on the loss or damage. will need to provide proof of purchase in the form...