hit counter script
Acer TravelMate 7000 User Manual
  1. Manuals
  2. Brands
  3. Acer Manuals
  4. Laptop
  5. TravelMate 7000
  6. User manual
Acer TravelMate 7000 User Manual

Acer TravelMate 7000 User Manual

Acer user's manual notebook computer travelmate 7000
Hide thumbs Also See for TravelMate 7000:
Table of Contents

Advertisement

Quick Links

Download this manual
TravelMate 7000
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Acer TravelMate 7000

Summary of Contents for Acer TravelMate 7000

  • Page 1 TravelMate 7000 User’s Manual...
  • Page 2 Copyright Copyright © 1997 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Acer Incorporated.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water.
  • Page 4 11. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. 12. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power cord or plug is damaged or frayed If liquid has been spilled into the product...

  • Page 5: Canadian Department Of Communications

    Concerning Lithium Batteries Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Léver det brugte batteri tilbage til leverandøren. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. Anvãnd samma batterityp eller en ekvivalent typ som Kassera anvãnt batteri enligt fabrikantens instruktion Päristo voi räjähtää, jos se on virheellisesti asennettu.
  • Page 6 FCC Class B Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 7: About This Manual

    About This Manual Purpose This manual discusses the features of the notebook and tells how to use and configure it. Manual Structure This manual consists of eight chapters and two appendices: Chapter 1, Getting Started, tells you how to get started with the notebook. Chapter 2, System Tour, gives a guided and in-depth “tour”...
  • Page 8 Conventions The following conventions are used in this manual: C:\setup, [Enabled], etc. message displayed , etc viii Represent text input by the user, default settings and recommended selections Denotes actual messages that appear on screen Represent the actual keys that you have to press on the keyboard NOTE Gives bits and pieces of additional information...

  • Page 9: Table Of Contents

    Getting Started Item Checklist ... 1-2 Taking Care of Your Computer... 1-3 1.2.1 Notebook ... 1-3 1.2.2 AC Adapter... 1-6 1.2.3 Battery Pack ... 1-6 1.2.4 Cleaning and Servicing... 1-7 1.2.5 Diskettes... 1-7 Connecting the Notebook ... 1-9 Getting Help Online... 1-10 System Tour Features...
  • Page 10 Storage ... 2-20 2.6.1 Hard Disk... 2-20 2.6.2 Module Bay ... 2-20 Ports ... 2-23 2.7.1 Left Panel Ports... 2-23 2.7.2 Rear Panel Ports ... 2-26 Audio ... 2-28 2.8.1 Built-in Speakers and Microphone ... 2-28 2.8.2 Controlling the Audio ... 2-29 Communications ...
  • Page 11 Power Management ... 3-10 3.2.1 The Concept of Heuristics... 3-10 3.2.2 Suspend Modes... 3-11 3.2.3 Advanced Power Management (APM) ... 3-14 Options External Monitor... 4-2 External Keyboard... 4-3 External Keypad... 4-4 External Pointing Device... 4-5 Printer ... 4-7 Audio Devices... 4-8 Mini Dock...
  • Page 12 Software System Software... 5-2 Sleep Manager... 5-3 5.2.1 Accessing the Sleep Manager... 5-3 5.2.2 Sleep Manager Functions ... 5-5 5.2.3 Running Sleep Manager ... 5-8 5.2.4 Sleep Manager Troubleshooting Tips... 5-9 5.2.5 Uninstalling Sleep Manager ... 5-10 Touchpad Driver ... 5-12 5.3.1 Configuring the Touchpad...
  • Page 13 6.4.10 Onboard Audio ... 6-15 6.4.11 Reset PnP Resources... 6-16 Power Saving Options... 6-17 6.5.1 When Lid is Closed... 6-18 6.5.2 Suspend to Disk on Critical Battery... 6-19 6.5.3 Display Always On... 6-19 6.5.4 Internal Speaker ... 6-19 6.5.5 External Mouse Location ... 6-19 6.5.6 Internal Modem ...
  • Page 14 Troubleshooting Q & A... 8-2 POST Error Messages ... 8-7 Specifications Address and Interrupt Tables System Memory Map ...B-1 I/O Address Map ...B-2 Interrupt Levels ...B-3 DMA Channels ...B-3...
  • Page 15 Write-protecting a 3.5-inch Diskette ... 1-8 Display... 2-5 Indicator Lights... 2-7 Keyboard Layout ... 2-8 Palm Rest ... 2-17 Touchpad... 2-18 Module Bay... 2-20 Left Panel Ports ... 2-23 Rear Panel Ports... 2-26 Built-in Speakers and Microphone ... 2-28 Connecting an External Monitor ... 4-2 Connecting an External Keyboard ...
  • Page 16 Indicator Status Descriptions ... 2-7 Lock Key Descriptions... 2-9 Using the Embedded Keypad ... 2-10 Windows 95 Key Descriptions ... 2-11 Hot Key List ... 2-12 Eject Menu Descriptions... 2-15 Touchpad Functions... 2-19 Left Panel Port Descriptions ... 2-24 Rear Panel Port Descriptions ... 2-27 2-10 Audio Control Hot Keys ...
  • Page 17 POST Error Messages ... 8-7 xvii...

  • Page 18: Getting Started

    Getting Started Congratulations on your purchase of the award-winning TravelMate 7000 notebook computer. Guaranteed and backed by Acer’s world-class support, you can be sure of top-notch performance with your new AcerNote. This chapter guides you through the first few steps on setting up your notebook computer.

  • Page 19: Item Checklist

    Item Checklist Carefully unpack the carton and remove the contents. following items is missing or damaged, contact your dealer immediately. Notebook computer Accessory box AC adapter Battery pack Floppy drive module External floppy drive cable User’s manual and other documentation Check for optional items, if any.

  • Page 20: Taking Care Of Your Computer

    Taking Care of Your Computer Your computer will serve you well if you take care of it. This section tells you how to care for the notebook. instructions at the beginning of this manual. 1.2.1 Notebook Getting Started Also, re-read the important safety Do not expose the notebook to direct sunlight.
  • Page 21 Do not subject the notebook to magnetic fields. Do not expose the notebook to rain or moisture. Do not spill water on the notebook. Do not subject the computer to heavy shock and vibration. User’s Manual...
  • Page 22 Do not expose the notebook to dust and dirt. Never place objects on top of notebook avoid damaging the notebook. Never place the notebook on uneven surfaces. Getting Started...

  • Page 23: Ac Adapter

    1.2.2 AC Adapter The AC adapter provides uninterrupted power to your notebook and charges your battery pack. Here are some ways of taking care of your AC adapter. Do not connect the adapter to any other device. Do not step on the power cord or place heavy objects on top of it. Carefully route the power cord and any cables away from personal traffic.

  • Page 24: Cleaning And Servicing

    1.2.4 Cleaning and Servicing When cleaning the notebook, follow these steps: Close the display lid to turn the notebook off. Disconnect the AC adapter. Remove the battery pack. Use a soft cloth moistened with water. Do not use liquid or aerosol cleaners.

  • Page 25: Write-Protecting A 3.5-Inch Diskette

    Write-protect your diskettes to prevent accidental erasure. To do this, slide the write-protect tab to the write-protect position. Write-protected Not write-protected Figure 1-1 Write-protecting a 3.5-inch Diskette When you put a label on a 3.5-inch diskette, make sure that the label is properly attached (flat on the surface) and within the labelling area (area with slight surface depression) on the diskette.

  • Page 26: Connecting The Notebook

    Connecting the Notebook After reading through the previous section, you are now ready to experience your new notebook. Connecting the notebook is as easy as 1-2-3. Getting Started Inserting the Battery Pack Insert the battery pack into the battery compartment and slide the battery compartment cover in place.

  • Page 27: Getting Help Online

    Getting Online If you are connected to the Internet and have World Wide Web access, visit our home page (http://www.acer.com/) and get the latest information about our products, as well as updates on software drivers and utilities. 1-10...

  • Page 28: System Tour

    System Tour This notebook capabilities and a truly advanced power management system in a unique human-centric and stylish design case. Work with unmatched productivity and reliability with your new power computing partner. This chapter gives an in-depth “tour” of the notebook’s many features. System Tour combines high-performance,...

  • Page 29: Features

    Features The notebook looks as good inside as it is outside, definitely designed with the user in mind. Here are just a few of the notebook’s many features: Performance High-end mobile Pentium microprocessor 64-bit main memory and 256KB external (L2) cache memory Large display in DualScan STN or active-matrix TFT PCI local bus video with 128-bit graphics accelerator Flexible module bay (3.5-inch floppy drive or CD-ROM drive)
  • Page 30 Human-Centric Design and Ergonomics Intuitive FlashStart automatic power-on Sleek, smooth and stylish design Automatic tilt-up, full-sized, full-function keyboard Wide and comfortable palm rest Ergonomically-centered touchpad pointing device Expansion PC Card (formerly PCMCIA) slots (two type II/I or one type III) Mini dock option with built-in Ethernet User-upgradeable memory System Tour...

  • Page 31: Display

    Display The large graphics display offers excellent viewing, display quality and desktop performance graphics. displays — DualScan STN or active-matrix TFT LCD. Video Performance PCI local bus video with 128-bit graphics acceleration boost your video to desktop-performance level, and allows you to run 30fps full-screen, true- color video playback via software MPEG.

  • Page 32: Display

    display is closed. FlashStart Automatic Power-On A noticeably unique feature about this notebook is that it has no on/off switch. Instead it employs a lid switch, located near the center of the display hinge, that tells the notebook when it should wake up or go to sleep. Lid Switch Figure 2-1 Display...
  • Page 33 The “Lid Closed” State When the lid is closed (i.e., the “lid closed” state), the notebook suspends its normally busy tasks to make itself electronically and mechanically more stable. When the lid is opened, the notebook briefly checks its environment and always re-initializes devices newly added in or removed from the notebook.

  • Page 34: Indicator Lights

    Indicator Lights Two indicator lights are found on the display panel. Figure 2-2 Indicator Lights These indicators and their descriptions are shown in Table 2-1. Table 2-1 Indicator Status Descriptions Icon Indicator Light Power Indicator Battery Indicator To know more about batteries and power management, see Chapter 3. System Tour Description Lights when power is on...

  • Page 35: Keyboard

    Keyboard The full-sized keyboard includes an embedded keypad, separate cursor keys, two Windows 95 keys and twelve function keys. Special keys are highlighted in different colors. 2.4.1 Keyboard Layout Figure 2-3 Keyboard Layout User’s Manual...

  • Page 36: Special Keys

    2.4.2 Special Keys Lock Keys The notebook has the three basic lock keys which you can toggle on and off. Some keys may require using Table 2-2 Lock Key Descriptions Description When Caps Lock is on, all alphabetical characters typed appear in uppercase.
  • Page 37 Embedded Keypad The embedded keypad functions like a desktop numeric keypad. indicated by small characters located on the upper right corner of the keycaps. To simplify the keyboard legend, the cursor-control key symbols are not printed. Table 2-3 tells how to use the embedded keypad. Table 2-3 Using the Embedded Keypad Desired Access...
  • Page 38 Windows 95 Keys The keyboard has two keys that perform Windows 95-specific functions. Table 2-4 Windows 95 Key Descriptions Windows logo key Application Key System Tour Description Start button. Combinations with this key performs special functions. Below are a few examples: Windows + Tab Activate next Taskbar button Windows + E Explore My Computer Windows + F Find Document...

  • Page 39: Hot Key List

    Hot Keys The notebook uses hot keys (key combinations) to access most of the notebook’s controls like screen contrast and brightness, volume output and the BIOS setup utility. Some hot keys will pop-up a corresponding icon onscreen for better visuals. When activating hot keys, press and hold the first key before pressing the other keys in the combination.
  • Page 40 Table 2-5 Hot Key List (continued) Hot Key System Tour Icon Function Description Display Switches display from LCD to CRT to Toggle both LCD and CRT Fuel Gauge Toggles battery gauge display on/off. On/Off Also shows the following: Speaker Toggles speaker output on and off On/Off Lock System Provides notebook security by locking...
  • Page 41 Table 2-5 Hot Key List (continued) Hot Key - t brings up the Eject Menu. Pressing Battery (Suspend to Disk)... CD-ROM Disc (Also Fn+1)... Power Off... = Move Highlight Bar, 2-14 Icon Function Description Contrast Up Increases screen contrast (DSTN only) Contrast Decreases screen contrast Down...

  • Page 42: Eject Menu Descriptions

    The eject menu commands allow you to perform various eject-related functions for the notebook. See the following table for details Table 2-6 Eject Menu Descriptions Select… Battery CD-ROM Disc Power Off System Tour To… Change the battery. This option forces the notebook to enter suspend-to-disk mode, so that you can replace the battery with a charged one, and then return to where you left off.

  • Page 43: Automatic Tilt Feature

    2.4.3 Automatic Tilt Feature The keyboard has the option of automatically tilting to a six-degree angle whenever you open the lid. notebook the comfortable typing angle provided in standard PC desktop keyboards. Together with the palm rest (discussed in the following section), these two ergonomic features help prevent repetitive strain injury to your wrists and fingers.

  • Page 44: Palm Rest

    2.4.4 Palm Rest Located below the keyboard, the wide and curved palm rest gives you a comfortable place to rest your hands while you type. Figure 2-4 Palm Rest System Tour Open the lid. 2-17...

  • Page 45: Touchpad

    Touchpad The ergonomically-centered touchpad is a pointing device that senses movement on its surface. This means the cursor responds as you move your finger on the surface of the touchpad. Figure 2-5 Touchpad The touchpad works with most mouse drivers. However, the touchpad driver supports special functions that work uniquely with the touchpad.

  • Page 46: Touchpad Functions

    Touchpad Basics The following two items teach you how to use the touchpad: Move your finger across the touchpad to move the cursor. Press the left and right buttons located on the lower edge of the touchpad to do selection and execution functions. These two buttons are similar to the left and right buttons on a mouse.

  • Page 47: Storage

    Storage 2.6.1 Hard Disk High-capacity storage comes in the form of a 2.5-inch Enhanced-IDE hard disk. The hard disk can be upgraded when you need more storage space. See section 4.9.2 for related information. 2.6.2 Module Bay The notebook’s flexible module bay accommodates either a high-speed CD-ROM drive module or a 3.5-inch, 1.44MB floppy drive.
  • Page 48 Swapping Modules The proper way to cleanly swap or interchange modules is to power off the notebook without the help of any suspend modes. The notebook needs to perform a “cold boot” (Windows 95 shutdown or via the Eject menu) or “warm boot”...
  • Page 49 Ejecting a CD Using the Floppy Drive Module Externally You can use the floppy drive module externally when a CD-ROM drive module is installed in the module bay. You cannot use the CD-ROM drive module externally. Only the floppy drive module can be used externally. 2-22 To eject a CD, press the eject button on the CD-ROM drive, press...

  • Page 50: Ports

    Ports Ports allow you to connect peripheral devices to your notebook computer as you would with a desktop PC. The ports are found on the left and rear panel. The following sections discuss these ports and their functions. See Chapter 4 on how to connect external devices to the notebook.

  • Page 51: Left Panel Port Descriptions

    Table 2-8 describes these ports. Table 2-8 Left Panel Port Descriptions Icon Port PC Card slots Microphone-in/Line-in Speaker-out/Line-out PC Card Slots There are two type II/I or one type III PC Card slots found on the left panel of the notebook. These slots accept credit-card-sized cards that enhance the usability and expandability of the notebook.
  • Page 52 If you want to install a card, refer to your card’s user’s manual for details on how to install and use the card. Multimedia Ports Connecting external audio devices to these ports automatically shuts off the corresponding internal audio device. For example, if you connect external speakers, the internal speakers automatically shut off.

  • Page 53: Rear Panel Ports

    2.7.2 Rear Panel Ports The rear panel includes the notebook’s main ports and connectors. See Figure 2-8. DC-in Port PS/2 Port Serial Port Parallel Port Figure 2-8 Rear Panel Ports 2-26 Mini Dock Connector External CRT Port RJ-11 Phone Jack Infrared Port User’s Manual...

  • Page 54: Rear Panel Port Descriptions

    Table 2-9 describes these ports. Table 2-9 Rear Panel Port Descriptions Icon System Tour Port DC-in port PS/2 port Serial port (UART16650-compatible) Parallel port (EPP/ECP-compliant) Mini dock connector External CRT port Modem jack (RJ-11) Infrared port Connects to... AC adapter and power outlet PS/2-compatible device (e.g., PS/2 keyboard, keypad, mouse)

  • Page 55: Audio

    Audio Standard notebook configuration includes 16-bit stereo audio with built-in FM synthesizer. Combined with the dual, angled speaker system and built- in sensitive microphone, this notebook redefines portable audio. 2.8.1 Built-in Speakers and Microphone The dual, angled speakers found on both sides of the display hinge directs sound towards you, and its unique audio chamber design allows for better acoustics and sound reverberation resulting in excellent sound quality.

  • Page 56: Controlling The Audio

    2.8.2 Controlling the Audio There are hot keys that allow you to control various aspects of the audio output. The following table lists the audio-specific hot keys: Table 2-10 Audio Control Hot Keys Hot Key These settings are only in effect for a single session (e.g., up to a power off).

  • Page 57: Communications

    Communications 2.9.1 Serial Infrared This notebook has an SIR (serial infrared) port located on the rear panel. Wireless communication support allows you to transfer data to SIR-”aware” machines without the aid of cables. Not only can you transfer data between two SIR-capable computers, you can also send data to SIR-”aware”...

  • Page 58: Fax/Data Modem

    2.9.2 Fax/Data Modem The notebook has an optional state-of-the-art, 28.8Kbps V.34 fax/data modem that supports V.42bis hardware compression (115.2 kilobits per second). The modem also supports DSVD (simultaneous voice over data) technology which allows you to send data and talk at the same time. Using the Modem The advantage of a built-in modem is that it frees up your PC card slots for other functions.

  • Page 59: Securing Your Notebook

    2.10 Securing your Notebook Security features include hardware and software locks — a security notch and a two-level password scheme. 2.10.1 Security Notch A security notch located on the left panel of the notebook lets you connect a standard key-based computer security lock. 2.10.2 System Resource Lock A two-level password scheme protects your notebook from unauthorized access.

  • Page 60: Power

    Power The notebook operates on AC or battery power. This chapter contains the information you need to know to operate the notebook on battery power. The chapter also includes information about the unique power management system. Power C h a p t e r...

  • Page 61: Battery Power

    Battery Power The notebook uses a single high-capacity Lithium-Ion smart battery pack that gives you longer use between charges. 3.1.1 Battery Pack Characteristics The battery pack has the following characteristics: Lithium-Ion Technology memory effect problem of Nickel Cadmium (NiCd) nor the temperature problem of Nickel Metal-Hydride (NiMH) battery types.

  • Page 62: Removing And Installing The Battery Pack

    notebook in suspend-to-memory mode. Do not expose battery packs to temperatures below 0ºC (32ºF) or above 60ºC (140ºF). This may adversely affect the battery pack. 3.1.2 Removing and Installing the Battery Pack Removing the Battery Pack Before removing the battery pack, make sure that you have an AC adapter connected to the notebook;...
  • Page 63 Insert the battery pack into the battery compartment and slide in the battery compartment cover. User’s Manual...

  • Page 64: Charging The Battery

    3.1.3 Charging the Battery To charge the battery, place the battery pack inside the battery compartment and plug the AC adapter into the notebook and an electrical outlet. Charging Modes The adapter has three charging modes: Rapid charge mode The notebook uses rapid charging when the notebook is in suspend mode and a powered AC adapter is connected to it.

  • Page 65: Checking The Battery Level

    3.1.4 Checking the Battery Level There are three ways to check the battery charge level: Onscreen fuel gauge Windows 95 battery indicator Battery pack gauge The fuel gauge shows the minimum guaranteed capacity to provide assurance that the system will be operational for the minimum battery life indicated.

  • Page 66: Battery-Level Chart

    Using the Battery Pack Gauge The battery pack gauge allows you to check your battery charge level even when it is not installed in the notebook. Table 3-1 is a battery-level chart. Table 3-1 Battery-level Chart Battery LEDs lllll llll ¡...

  • Page 67: Optimizing Battery Life

    3.1.5 Optimizing Battery Life Optimizing battery life prolongs the charge/recharge cycle and improves recharge efficiency. Follow these suggestions to optimize and maximize battery power: Purchase an extra battery pack. Set the When Lid is Closed parameter in Setup to . See section 6.5.1. Disk] Use the AC adapter whenever possible so that the battery is reserved for on-the-go computing.

  • Page 68: Battery Low Condition

    3.1.6 Battery Low Condition You never have to worry about battery power as long as you are using the AC adapter. However, when you operate the notebook on battery power, pay extra attention to the battery indicator ( Generally speaking, a battery-low condition occurs when less than twenty percent charge left is in the battery.

  • Page 69: Course Of Action For Battery-Low Condition

    Table 3-2 lists the recommended course of action when you encounter a battery-low condition. Table 3-2 Course of Action for Battery-low Condition Situation AC adapter and power outlet available An extra fully-charged battery pack available AC adapter, power outlet and extra battery pack not available 3-10 Recommended Action...

  • Page 70: Power Management

    Power Management At the very heart of this notebook is a new way of power management called Heuristic Power Management (HPM). Part of the notebook’s overall design, this power management method allows the notebook to provide maximum power conservation and maximum performance. 3.2.1 The Concept of Heuristics Current power management schemes or methods used by notebooks are...

  • Page 71: Suspend Modes

    3.2.2 Suspend Modes The heuristic power management system performs automatic suspend, hot- key suspend and all suspend actions resulting from various events and conditions. You only need to set the suspend mode type the notebook enters when a suspend condition occurs. The two suspend modes are: Suspend-to-memory mode Suspend-to-disk mode...
  • Page 72 When battery runs out of power and the AC adapter is not connected, the notebook automatically does a suspend-to-disk operation and ignores the When Lid is Closed parameter setting in Setup. The suspend-to-disk file should be present and valid. Power 3-13...
  • Page 73 For the notebook to enter suspend-to-memory mode, any of the following conditions should exist: When Lid is Closed parameter is set to The suspend-to-disk file is either absent or invalid With the suspend-to-memory conditions satisfied, there are many ways to enter suspend mode: Closing the display Pressing the suspend hot key...
  • Page 74 Suspend-to-Disk Mode In suspend-to-disk mode, power shuts off. The notebook saves all system status information onto the hard disk (in a file created by Sleep Manager) before entering suspend-to-disk mode. notebook, it restores this information from the hard disk and resumes from where you last left off.

  • Page 75: Advanced Power Management (Apm)

    3.2.3 Advanced Power Management (APM) This notebook supports the APM standard designed to further reduce power consumption. APM is a power-management approach defined jointly by ® Microsoft and Intel works hand-in-hand with APM to take advantage of power saving features and allows greater system availability without degrading performance.

  • Page 76: Options

    Options This notebook offers excellent connectivity and expansion capabilities with its built-in ports and connectors. This chapter describes how to connect peripherals and hardware options peripherals, read the manual included with the peripheral for operating instructions. This chapter also includes information on the key components that you can upgrade.

  • Page 77: External Monitor

    External Monitor To show graphical effects on a larger display, you can connect an external monitor to the CRT port ( for additional instructions. Figure 4-1 Connecting an External Monitor You can press CRT and back to the notebook display or simultaneously on both displays.

  • Page 78: External Keyboard

    External Keyboard This notebook has a keyboard with full-sized keys and an embedded keypad. If you feel more comfortable using a desktop keyboard, you can install a PS/2-compatible external keyboard. To connect an external keyboard, plug the external keyboard into the PS/2 connector ( Figure 4-2 Connecting an External Keyboard...

  • Page 79: External Keypad

    External Keypad You can also use a 17-key numeric keypad for number-intensive data entry applications. To connect the keypad, plug in the keypad connector to the PS/2 port ( Figure 4-3 Connecting an External Keypad ) at the rear of the notebook. User’s Manual...

  • Page 80: External Pointing Device

    External Pointing Device This notebook accepts either a serial mouse or PS/2-compatible mouse or similar pointing device. Connecting an External Pointing Device Plug a serial mouse into the serial port ( PS/2-compatible mouse into the PS/2 port ( To enable a serial mouse, you need to use the Add New Hardware tool in the Windows 95 Control Panel to detect and install the necessary drivers.
  • Page 81 Setting the External Mouse Location Parameter After connecting the external mouse or similar pointing device, press to enter Setup and verify the location of the external pointing device. Select Power Saving Options to display the following screen: When Lid is Closed ------------------ [ Suspend to Disk ] Suspend to Disk on Critical Battery - [Enabled ] Display Always On ------------------- [Disabled] Internal Speaker -------------------- [Enabled ]...

  • Page 82: Printer

    Printer This notebook supports both serial and parallel printers. For a serial printer, plug the printer cable into a serial port ( the printer cable into the parallel port ( operating instructions. Figure 4-5 Connecting a Parallel Printer Options ). For a parallel printer, plug ).

  • Page 83: Audio Devices

    Audio Devices You can connect audio devices to the line-in and line-out ports on the notebook. The line-in audio port doubles as a microphone-in port as well. The line-in port accepts an external 3.5mm mini-jack microphone or other line-in devices. speakers or headphones.

  • Page 84: Mini Dock

    Mini Dock The mini dock serves as a docking base that allows you to connect your notebook to all the peripherals you need, even network connections with its built-in Ethernet support. Consult your dealer for details. A quick guide is included with the mini dock for easy and quick connection instructions.

  • Page 85: Miscellaneous Options

    Miscellaneous Options 4.9.1 Additional Power Packs Lithium-Ion Battery Pack It is good practice to have a spare battery pack around, especially when you travel. The Li-Ion (lithium-ion) smart battery supplies more power than a conventional NiMH management, you get even more power on-the-go. Each battery pack comes attached with a battery compartment cover.
  • Page 86 AC Adapter You can purchase an additional AC adapter for your notebook or mini docking station. Options Detaching the Battery Compartment Cover Gently compartment cover release latch and slide out the cover. The compact AC adapter charges your battery pack and supplies power to your notebook.

  • Page 87: Cables

    4.9.2 Cables Floppy Drive Cable The floppy drive cable allows you to use your floppy drive module externally. PS/2 Y-Bridge Cable The PS/2 Y-bridge cable allows you to connect two PS/2 devices, mouse and keyboard, to your notebook simultaneously. 4-12 Open the port cover of the notebook and connect the 25-pin connector end of the floppy drive cable to the...

  • Page 88: Using The File Transfer Cable

    File Transfer Cable For non SIR- (serial infrared) capable connections, you can use the file transfer cable to transfer data between the notebook and other computers. Connect the file transfer cable between the two computers and use your file transfer utility to perform the transfer. Figure 4-8 Using the File Transfer Cable Options...

  • Page 89: Key Component Upgrades

    4.10 Key Component Upgrades This notebook delivers the power and performance you need. However, some users and the applications they use may demand more. notebook allows you to upgrade key components when you need increased performance. Contact your authorized dealer if you decide to perform an upgrade.
  • Page 90 Installing Memory When installing memory, we recommend you seek the help of a qualified service technician. damage the memory module or the notebook, or cause a malfunction. One of the two memory slots (Slot 2) is accessible via a memory expansion door on the base of the notebook.

  • Page 91: 4.10.2 Hard Disk

    After new memory modules have been installed, the system automatically detects and reconfigures the total memory size. To upgrade memory installed in the other slot (Slot 1), contact your dealer. 4.10.2 Hard Disk You can have your hard disk upgraded to one with a higher capacity. The notebook uses a 2.5-inch Enhanced-IDE hard disk that is auto-detected by the system.

  • Page 92: Software

    Software This notebook comes pre-loaded with application software and system utilities. This chapter discusses some of these applications and how to make use of them. Software C h a p t e r 5...

  • Page 93: System Software

    System Software The notebook comes preloaded with the following software Windows 95 or other operating systems System utilities and applications Suspend-to-disk utility (Sleep Manager) Touchpad driver Display driver Audio driver Modem driver and application System core logic driver File-transfer utility PC Card slot driver and application Other application software The following sections discuss the software and how they work.

  • Page 94: Sleep Manager

    Sleep Manager Notebooks usually feature built-in power-saving functions. In addition to the normal standby mode for power-saving, our notebooks are also capable of a power management feature called 0-volt suspend to hard disk. When a suspend event occurs, this built-in function saves all the system’s current status onto your hard disk in the form of a file.

  • Page 95: Sleep Manager Window Items

    The Sleep Manager displays below: Table 5-1 Sleep Manager Window Items Item Buttons Current Setting On Board Information Description Click to access the Sleep Manager functions Displays the drive and size of the current reserved space created by Sleep Manager. Displays the different areas of system memory and their respective values.

  • Page 96: Sleep Manager Functions

    Table 5-1 Sleep Manager Window Items (continued) Item Recommended Size Enable Indicator on the Taskbar 5.2.2 Sleep Manager Functions Create The main purpose of Sleep Manager is to find and reserve a contiguous area on the hard disk. The user can allocate the space themselves by using the ‘Create’...
  • Page 97 Sleep Manager automatically checks the system configuration and displays the recommended size. The drive where the space will be created is defined by the system and will be the first available logical drive which has the requested contiguous free disk space on it. The recommended size is the minimum size needed to save the current system status.
  • Page 98 Another possible reason is that the hard disk has enough free space, but this free space exists as small fragments. The free disk space that Sleep Manager requires needs to be contiguous. To solve this problem, the user can use tools such as SpeedDisk (Norton Utilities) or Disk Defragmenter (Windows 95) to compact these free disk spaces.

  • Page 99: Running Sleep Manager

    Exit The user can exit Sleep Manager by selecting the Exit button. Sleep Manager will then quit and disable the capability of auto-adjusting the reserved space size. Disconnecting this feature is NOT recommended. 5.2.3 Running Sleep Manager Once Sleep Manager is installed on the disk, the system automatically loads this utility every time you start Windows 95.

  • Page 100: Sleep Manager Troubleshooting Tips

    5.2.4 Sleep Manager Troubleshooting Tips The following table lists the error messages you may receive with their corresponding solutions: Table 5-2 Sleep Manager Error Messages and Solutions Error Message BIOS not compliant with Sleep Manager. This machine does not have a power management unit.

  • Page 101: Uninstalling Sleep Manager

    5.2.5 Uninstalling Sleep Manager Uninstalling Sleep Manager will delete all files and all system information for Sleep Manager, it loses the capability of auto-adjusting the reserved space size for the system configuration changes or modifications, though the 0-volt suspend feature still functions To uninstall Sleep Manager from the Windows, follow these steps: Quit the Sleep Manager if it is still running.
  • Page 102 With Sleep Manager installed and the When Lid is Closed parameter in Setup set to notebook enters suspend-to-disk mode when you close the display. The notebook also enters this mode when battery is critically low if the Suspend to Disk on Critical Battery parameter in Setup is set to When Lid is Closed setting.

  • Page 103: Touchpad Driver

    Touchpad Driver The touchpad works with most mouse drivers, but the touchpad driver supports special functions that work uniquely with the touchpad. touchpad driver enhances the Mouse dialog box to include these special features. 5.3.1 Configuring the Touchpad Follow these steps to configure the touchpad: Click on the Start button, then select Settings...

  • Page 104: Setup

    Setup The notebook has a BIOS (Basic Input/Output System) setup utility that allows you to configure the notebook and its hardware settings. chapter tells how to use the Setup utility and describes each parameter item in the setup screens. Setup C h a p t e r This...

  • Page 105: When To Use Setup

    When to Use Setup The notebook is already correctly configured for you and you do not need to run Setup. If you make any changes to the notebook or you receive an Equipment Configuration Error message after you turn on the notebook, you may need to run Setup.

  • Page 106: Entering Setup

    Entering Setup - m to enter Setup. The BIOS Utility main screen displays. Press There are five main menu items: About My Computer System Configuration Power Saving Options System Security Reset to Default Settings Press w , y , z or x to move from one menu item to another and press e to enter the selected menu.

  • Page 107: About My Computer

    About My Computer About My Computer gives you clear-cut information about your notebook PC. The following screen is the first of two pages in this section. System Architecture : MARS 1996-1997 System BIOS : BIOS V2.0 System ID : VGA010602, KBC010607, SMC010023, SMM010210 Processor : Coprocessor : Integrated Internal Cache (L1) :...

  • Page 108: About My Computer Item Descriptions

    Expansion Peripherals PCMCIA Slot 0 : None PCMCIA Slot 1 : None Parallel Port : 378h, IRQ7 Serial Port : 3F8h, IRQ4 AC Adapter : None Main Battery : 60W Li-Ion Onboard Audio Base Address : MPU Base Address : IRQ Setting : IRQ 5 DMA Channel : DMA 0 PgDn/PgUp = Move Screen, Esc = Exit...
  • Page 109 Table 6-1 About My Computer Item Descriptions (continued) Item Internal Cache (L1) External Cache (L2) Total Memory Bank A Bank B Graphics Controller Display Output Hard Drive 0 Hard Drive 1 Floppy Drive A Floppy Drive B Expansion Peripherals PCMCIA Slot 0 PCMCIA Slot 1 Parallel Port Serial Port...

  • Page 110: System Configuration

    System Configuration The following screen is the basic system configuration screen. Current Date ---------------- [09/16/96] Current Time ---------------- [16:30:35] Diskette Drive A ------------ [1.44 MB 3.5-inch] Diskette Drive B ------------ [ Hard Disk 0 (1160 MB) ------- [Auto] Hard Disk 1 ( Num Lock After Boot --------- [Disabled] LCD Expansion Mode ---------- [Disabled] = Move Highlight Bar,...

  • Page 111: Diskette Drives

    6.4.2 Diskette Drives The default setting for Diskette Drive A is refers to the floppy drive whether it is installed in the module bay or connected externally via the parallel port. Diskette Drive B by default is set [None] , and is only enabled if two floppy drives are connected to the notebook.
  • Page 112 For advanced users, the System Configuration section has two hidden pages called Advanced System Configuration that allow you to view and configure more technical aspects of the notebook. The notebook’s BIOS configuration is already tuned for optimum performance and you do not need to access these screens.

  • Page 113: Internal Cache

    Press } again to access the next hidden screen. Onboard Communication Ports Serial Port Base Address --- [3F8h, IRQ4] IrDA Base Address ---------- [2F8h, IRQ3] Modem Base Address --------- [ IRQ Setting ------------ [10] Parallel Port Base Address - [378h, IRQ7] Operation Mode --------- [ ECP DMA Channel ---- [-] Onboard Audio ------------------ [Enabled ]...

  • Page 114: External Cache

    6.4.7 External Cache External cache greatly increases system performance by lessening the load of main memory. It is also called L2 (level 2) cache. The default setting is [Enabled] 6.4.8 Enhanced IDE Features The Enhanced IDE Features section includes four parameters for optimizing hard disk performance.

  • Page 115: Onboard Communication Ports

    The highest value, 16 sectors, may not give you the best performance every time, because hard disks behave differently. The default setting, , allows the system to adjust itself to the optimum read/write [Auto] setting. Advanced PIO Mode Advanced performance by optimizing the hard disk timing. include: Auto Mode 0...
  • Page 116 Serial Port Base Address This parameter accepts the following values: [3F8h, IRQ 4] [2F8h, IRQ 3] [3E8h, IRQ 4] [2E8h, IRQ 3] [Disabled] The default setting is IrDA Base Address This parameter accepts the following values: [2F8h, IRQ 3] [Disabled] The default setting is Modem Base Address and IRQ Setting This parameter accepts the following values:...
  • Page 117 Parallel Port Base Address, Operation Mode and ECP DMA Channel The Parallel Port Base Address parameter accepts the following values: [378h, IRQ 7] [3BCh, IRQ 7] [278h, IRQ 5] [Disabled] The default setting is The Operation Mode parameter for the parallel port accepts the following: [Standard and Bi-directional] [Enhanced Parallel Port (EPP)] [Extended Capabilities Parallel Port (ECP)]...

  • Page 118: 6.4.10 Onboard Audio

    6.4.10 Onboard Audio This parameter lets you enable or disable the onboard audio functionality of the notebook. This section also includes settings for onboard audio. The default setting is Base Address This parameter accepts the following values: [220h] [230h] [240h] [250h] The default setting is MPU Base Address...

  • Page 119: 6.4.11 Reset Pnp Resources

    6.4.11 Reset PnP Resources The system resources are already properly configured. If resource conflicts should arise, set this parameter to [ re-do allocation. The BIOS automatically sets this to The default setting is 6-16 Yes] to reset the PnP resources and [No ] afterwards.

  • Page 120: Power Saving Options

    Power Saving Options The following screen is the power saving options screen. When Lid is Closed ------------------ [ Suspend to Disk ] Suspend to Disk on Critical Battery - [Enabled ] Display Always On ------------------- [Disabled] Internal Speaker -------------------- [Enabled ] External Mouse Location ------------- [PS/2] Internal Modem ---------------------- [Power-On] Resume On Modem Ring ---------------- [OFF]...

  • Page 121: When Lid Is Closed

    6.5.1 When Lid is Closed The notebook’s lid switch acts as its power switch. Simply put, opening the display wakes up the notebook; closing the display puts it to sleep. The When Lid is Closed parameter determines which suspend mode the notebook enters when the display is closed.

  • Page 122: Suspend To Disk On Critical Battery

    6.5.2 Suspend to Disk on Critical Battery With this parameter set to disk mode when the battery becomes critically-low. The default setting is [Enabled] 6.5.3 Display Always On This parameter lets you specify whether the display is always on or not. When enabled, the screen will not blank.

  • Page 123: Internal Modem

    6.5.6 Internal Modem For models with an internal modem, set this parameter to when you are using the internal modem. If you are not actively using the internal modem, you can set this parameter to power. The default setting is 6.5.7 Resume On Modem Ring You can set the notebook to resume from suspend-to-memory mode upon...

  • Page 124: System Security

    System Security The following screen is the system security screen. If a password is currently present, the system prompts you to input the password before entering the System Security screen. Supervisor Password ------------ [ None ] User Password ------------------ [ None ] Disk Drive Control Diskette Drive ------------- [ Hard Disk Drive ------------ [...

  • Page 125: Supervisor And User Passwords

    6.6.1 Supervisor and User Passwords The supervisor and user passwords both prevent unauthorized access to the notebook. When these passwords are present, the notebook prompts for the user or supervisor password during system boot-up and resume from suspend. The supervisor password also gives full access to Setup. The user password give limited access to Setup.

  • Page 126: Diskette Drive Control

    After setting a password, the notebook sets this parameter to The next time you boot the notebook, resume from suspend mode, run the Setup utility or unlock system resources, the password prompt appears. Key in the appropriate password (Supervisor or User). The system asks for your password input until you enter the correct password.

  • Page 127: Hard Disk Drive Control

    6.6.3 Hard Disk Drive Control This parameter allows you to enable or disable the read/write functions of the hard disk. The following table summarizes the available options. Table 6-3 Hard Disk Drive Control Settings Setting Normal (default) Write-Protect Disabled 6.6.4 Start Up Sequences This parameter determines which drive the system boots from when you turn on the system.

  • Page 128: Flash New Bios

    6.6.5 Flash New BIOS Contact your authorized dealer if you need to upgrade your BIOS. Setup 6-25...

  • Page 129: Reset To Default Settings

    Reset to Default Settings Selecting this option allows you to load all the default settings. settings are the values initially stored in CMOS RAM intended to provide high performance. If in the future you change these settings, you can load the default settings again by selecting this option.

  • Page 130: Traveling With The Notebook

    Traveling with the Notebook This chapter tells you what to do when traveling with the notebook. This chapter also includes a list of our worldwide offices and contact information. Traveling with the Notebook C h a p t e r...

  • Page 131: Travel Preparations

    Travel Preparations Follow these steps to prepare the notebook for travel: Make diskette or tape backup copies of important files on the hard disk. Close the display to turn off the notebook and all peripherals. Make sure the display is properly closed. The display cover latch must be secure.

  • Page 132: International Traveler's Warranty

    Simply fill up and return the ITW application form to avail of this unique service. Below is a list of Acer-authorized ITW service sites. Have your ITW card number ready when you call. For updated sites and more information on ITW, see the ITW brochure.
  • Page 133 Camp Road, Maitland CT. Box 7367, Roggebaai, 8012, South Africa Tel: 27-21-510-5960 Fax: 27-21-510-2838 Attn: Mr. Tom Simpson Acer Computer Australia Pty Ltd. (ACA) Tower A, Level 3, 112-118 Talavera Rd, North Ryde, NSW 2113, Australia Tel: 61-2-9870-1999 Fax: 61-2-9878-6943 Attn: Ms.
  • Page 134 Block 4, Pasir Panjang Rd., #10-29 Alexandra Distripark, Singapore 0511 Tel: 65-276-4878 Fax: 65-274-9925 Attn: Mr. Vincent Ng Acer Sales & Service Sdn Bhd (AMA) Tech. Supp. . No. 25, Jalan 8/91, Taman Shamelin Perkasa, Off Jalan Cheras, 56100 Kuala Lumpur, Malaysia Tel: 60-3-984-2488 Fax: 60-3-981-3302 Attn: Mr.

  • Page 135: Worldwide Support

    Worldwide Support If the country you are traveling in does not have an Acer-authorized ITW service site, you can still get in contact with our offices worldwide. World Headquarters Acer Incorporated 156 Min Sheng E. Road Sec. 3, 6F Taipei, Taiwan 105, R.O.C.
  • Page 136 4th Area, 3F Rm.329 37 Bai Shi Qiao Rd., Haidian District, Beijing, People’s Republic of China Telephone: 86-1-847-2233 Facsimile: 86-1-847-1101 Acer Sales & Services Sdn. Bhd. Level 17 Menara Lion 165 Jalan Ampang 50450 Kuala Lumpur, Malaysia Telephone: 60-3-466-3223/262-1388 Facsimile: 60-3-466-2388/261-8113 Acer Sertek Incorporated 135 Chien Kuo N.
  • Page 137 Acer Computer Iberica, S.A. Frederic Mompou 5, 3, 2B Sant Just Desvern 08960 Barcelona, Spain Telephone: 34-3-4990303 Facsimile: 34-3-4990483 Acer Italy s. r. l. Via Cassanese 210 20092 Segrate, Milan, Italy Telephone: 39-2-2692-2565 Facsimile: 39-2-2692-1021 Acer Scandinavia A/S Kongevejen 62A 3460, Birkerød, Denmark...
  • Page 138 Acer America/North Central West Two Continental Towers 1701 Golf Rd., Suite 601 Rolling Meadows, IL 60008, USA Telephone: 1 (708) 640-7112 Facsimile: 1 (708) 640-6865 Acer America/Midwest Farmington Hills, MI Telephone: 1 (810) 471-2451 Facsimile: 1 (810) 471-2451 Acer America/South Central 5025 Arapaho Rd., #250...
  • Page 139 Africa Acer Africa (Pty) Ltd Fedlife Park, Unit 12A Cnr. Pretoria Main Rd. and Tonnetti St., Halfway House South Africa Telephone: 27-11-315-3335 Facsimile: 27-11-315-1032 7-10 User’s Manual...
  • Page 140 You can also contact the local dealer or distributor in the country you are traveling for assistance. If you are connected to the Internet and have World Wide Web access, visit our home page (http://www.acer.com/) and get an updated list of our worldwide offices, as well as information about our products.

  • Page 141: Troubleshooting

    Troubleshooting This chapter tells how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the system. system by yourself. Contact your dealer or an authorized service center for assistance.
  • Page 142 Q & A Q & A lists possible situations that may arise during the use of your notebook, and gives easy answers and solutions to these questions. Q: I travel a lot and occasionally use my notebook in extreme temperature conditions. Will my notebook bend to the weather? The notebook’s core design makes use of materials that dissipate heat quickly, without the need of a fan that can be noisy at times.
  • Page 143 Q: I prefer using an external keyboard and mouse, but both have PS/2 connectors and there is only one PS/2 port on the notebook. How do I connect them to the notebook at the same time? To connect two PS/2-type devices to the notebook, you need to use a PS/2 Y-bridge cable.
  • Page 144 Q: I made some changes in Setup but they don’t seem to take effect. If you made any changes in Setup, these will only take effect the next time the system restarts. Here a few ways to restart your notebook: In Windows 95, click on the Start button and select Shutdown….
  • Page 145 Q: The serial mouse does not work. Do the following: Make sure that the serial cable is plugged securely into the serial port. Try pressing Remember to set the External Mouse Location parameter in the Power Saving Options screen in Setup and select COM1 if you connected your mouse to the serial port.
  • Page 146 Q: No audio comes out from the notebook. Check the following: The volume may be muted. Press not contain a speaker icon, press back on. The volume level may be too low. Press the volume. If headphones, earphones or external speakers are connected to the headphone/speaker-out port on the notebook’s left panel, the internal speakers automatically turn off.

  • Page 147: Post Error Messages

    POST Error Messages If you receive an error message during POST, note the message and take corrective action. Table 8-1 lists the error messages in alphabetical order together with the recommended course of action. Table 8-1 POST Error Messages Error Message CMOS Battery Bad CMOS Checksum Error Disk Boot Failure...
  • Page 148 Table 8-1 POST Error Messages (continued) Error Message Missing operating system Non-system disk or disk error. Replace and strike any key when ready Pointing Device Error Pointing Device Interface Error Protected Mode Test Fail RAM BIOS Bad RAM Parity Error Real-Time Clock Error Video RAM BIOS Bad In cases where you need to reconfigure the notebook by entering Setup...
  • Page 149 Troubleshooting...

  • Page 150: Specifications

    Specifications Item Microprocessor Memory System / Main External cache FLASH BIOS Storage system Display Video system Specifications Standard Mobile Intel Pentium™ processor with MMX 16MB Dual 64-bit memory banks 256KB L2 cache (synchronous SRAM) 256KB One 2.5-inch, high-capacity Enhanced-IDE hard disk One high-speed IDE CD-ROM drive module One 3.5-inch, 1.44MB...
  • Page 151 Item Audio system Communications system Operating system Keyboard and pointing device I/O ports This feature is available only in the U.S. Standard 16-bit stereo audio with built-in FM synthesizer Built-in microphone and dual angled speakers Built-in V.34 fax/data modem (28.8Kbps) with digital simultaneous voice over data (DSVD) support Windows 95...
  • Page 152 Item I/O ports (continued) Weight with FDD with CD-ROM Dimensions Round contour Main footprint Temperature Operating Non-operating Humidity Operating Non-operating This option is available only in the U.S. and Japan. Specifications Standard One type III or two type II PC Card slot(s) One serial infrared port (IrDA-compliant) One 3.5mm minijack...
  • Page 153 Item AC adapter Battery pack Type Charge time Standard 100~240Vac, 50~60Hz autosensing AC adapter 57WH Lithium-Ion battery with intelligent charging and built-in battery gauge 2.0-hour rapid-charge 4.0-hour charge-in-use Optional Extra AC adapter Extra battery pack User’s Manual...

  • Page 154: Address And Interrupt Tables

    Address and Interrupt Tables System Memory Map Address Range 000000 - 09FFFF 0A0000 - 0BFFFF 0C0000 - 0CBFFF 0F0000 - 0FFFFF 10000 - 7FFFF 80000 - 27FFF FE0000 - FFFFFF Address and Interrupt Tables Definition Function 640 KB memory Base memory 128 KB video RAM Reserved for graphics display buffer...

  • Page 155: I/O Address Map

    I/O Address Map Address Range 000 - 00F 020 - 021 024, 026, B0h 02E - 02F 040 - 043 048 - 04B 060 - 06E 070 - 071 080 - 08F 0A0 - 0A1 0C0 - 0DF 1F0 - 1F7 3F6 - 3F7 170 - 177 376 - 377...

  • Page 156: Dma Channels

    Interrupt Levels Interrupt Number IRQ 0 IRQ 1 IRQ 2 IRQ 3 IRQ 4 IRQ 5 IRQ 6 IRQ 7 IRQ 8 IRQ 9 IRQ 10 IRQ 11 IRQ 12 IRQ 13 IRQ 14 IRQ 15 DMA Channels Controller Address and Interrupt Tables Interrupt Source (Device Name) System Timer Keyboard...

Table of Contents

Save PDF