Fig. 25: Soaking The Turbine End; Table 11: Value Table For Soaking - ABB A130-H57 Operation Manual
Hide thumbs
Also See for A130-H57:
- Operation manual (122 pages) ,
- Operation manual (124 pages) ,
- Operation manual (124 pages)
Table of Contents
Advertisement
Operation Manual / 4 Product description / A130-H.. - A140-H
6 Periodic maintenance work / 6.2 Cleaning components mechanically
6.2.7
Cleaning the cartridge group on turbine end
Soaking the contamination
Baked layers of contamination from coked oil occur at the turbine end. The contamination
can be removed by soaking and brushing. The procedure for soaking the layers of contamin-
ation as well as for cleaning the turbine are described in the following.
Fig. 25: Soaking the turbine end
Product
A130
A135
A140
Table 11: Value table for soaking
To soak the layers of contamination on the turbine, the cartridge group can be immersed
vertically in a container (02) with fluid.
Place the container (02) inside a larger container (03) so that the overflowing fluid can be
u
collected.
CAUTION
Selection of the cleaning agent
Cleaning agents which contain chlorine attack metals.
Use only pH-neutral cleaning agents which do not attack metals.
u
Observe safety data sheet.
u
Fill the container (02) with soaking fluid. To shorten the soaking time, the fluid can be
u
heated up to a maximum of 60 ºC.
© Copyright 2017 ABB. All rights reserved.
A [mm]
108
128
157
HZTL4030_EN
B [mm]
17
20
25
Revision D
C [mm]
205
245
300
May 2017
Advertisement
Chapters
Table of Contents
