hit counter script

Speakers - HP ProOne 600 G3 Maintenance & Service Manual

21 inch all-in-one business pc
Hide thumbs Also See for ProOne 600 G3:
Table of Contents

Advertisement

Speakers

The speakers are located at the bottom of the computer. Two separate speakers are each secured by two Torx
screws.
To remove the speakers:
1.
Prepare the computer for disassembly (see
2.
Remove the rear port cover (see
3.
Remove the stand (see
4.
Remove the access panel (see
5.
Remove the system board shield (see
6.
Remove the feet, rear I/O cover, and bottom panel (see
on page
7.
Disconnect the speaker cable from the system board (1).
8.
Remove two Torx screws (2) that secure each speaker to the computer.
9.
Remove speaker cable from the clips and routing path built into the chassis (3), and then remove the
speakers from the computer.
10.
Remove the speakers from the computer.
To install the speakers, reverse the removal procedures.
54
Chapter 4 Removal and Replacement Procedures
Rear port cover on page
Attaching and removing a stand on page
Access panel on page
52).
Preparing to disassemble the computer on page
23).
24).
System board (EMI) shield on page
Feet, rear I/O bracket, and bottom panel
20).
30).
19).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents