Connecting a cable box
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
Please contact your local CATV or DBS
provider for cable box or DBS receiver
connection.
Cable
IN
OUT
*Cable box
Connecting the telescopic antenna
(KV-14B80 only)
1
Connect the end of the 300-ohm twin lead
cable to the antenna connector.
a
(Rear of TV)
VHF/UHF
c
2
Connect the antenna connector to the
VHF/UHF antenna terminal.
3
Attach the telescopic antenna to the socket
on the rear panel.
Notes:
• When using the VHF/UHF mixer, noise
and image interference (fuzz etc.) may
occur while receiving cable TV channels
above 37 (W+1).
• An outdoor antenna is recommended for
receiving images of higher quality.
b
loosen the screws
connect the cable and
tighten the screws
telescopic antenna (supplied)
3
2
antenna connector (supplied)
1
7