Figure 2.2 Lun Manager/Port Panel, Port Tab - Hitachi Freedom Storage Lightning 9900 V series Configuration Manual

Red hat linux

Hide thumbs Also See for Freedom Storage Lightning 9900 V series:

Table of Contents

Table 2.1

Fibre Parameter Settings for the 9900V

Fabric Parameter

Connection Parameter

FC-AL

Point-to-Point

OFF

FC-AL

OFF

Point-to-Point

Topology parameters. Use the LUN Manager software to define the topology parameters and

port ID for each fibre-channel port. For additional instructions, please refer to the Hitachi

Lightning 9900™ V Series LUN Manager User's Guide (MK-92RD105). Your Hitachi Data

Systems representative can also configure the fibre-channel ports for you using the SVP of

the subsystem. Please contact your Hitachi Data Systems account team for further

information on LUN fibre-channel configuration services. When you are finished configuring

the fibre-channel ports, you can exit the LUN Manager software.

Note: The 9900V subsystem supports up to 256 LUs per fibre-channel port, but connectivity

with Linux

systems is limited to 16 LUs per FC port.

Figure 2.2

LUN Manager/Port Panel, Port Tab

Hitachi Lightning 9900™ V Series Red Hat

Provides:

Not supported

NL-port (private arbitrated loop)

Not supported

Linux

Configuration Guide

Table of Contents