Data Buffering Operation - Panasonic HL-C2 Series User Manual
Ultra high-speed, high-accuracy
laser displacement sensor
Hide thumbs
Also See for HL-C2 Series:
- User manual (100 pages) ,
- User manual (98 pages) ,
- User manual (24 pages)
Table of Contents
Advertisement
Chapter 4 Explanation of Functions
■ Data Buffering Operation
Data buffering procedure
1
Perform necessary setting for buffering.
· Buffering mode
· Buffering type
· Buffering rate
· Accumulation amount
· Sample trigger accumulation amount
· Self-stop
· Trigger delay
2
Transmit the start command and
start buffering.
· Buffering operation start
4
3
Start data accumulation.
Start accumulation to the controller
memory.
*Start of accumulation differs
depending on buffering mode.
4
Wait until accumulation is completed.
The accumulation status can be
checked by "Status Readout".
· Status Readout
5
Stop buffering by transmitting the
stop command.
· Buffering operation stop
6
Read out the accumulated data result.
· Last data point
· Data readout (normal)
· Data readout (rapid)
・ Trigger counter readout
All the settings related to buffering cannot be changed during the buffering
operation. Change the settings after buffering operation stops.
HL-C2
· Trigger conditions
· Trigger point
4-76
PC
(host device)
(1) Send
Settings
(2) Buffering
start
(3) Accumulation
start
(4) Status check
Is accumulation
completed?
Yes
(5) Buffering
stop
(6) Accumulated
data readout
No
Advertisement
Table of Contents
