hit counter script
Sony FCB-CH7500 Operation Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Security Camera
  5. FCB-CH7500
  6. Operation manual
Sony FCB-CH7500 Operation Manual

Sony FCB-CH7500 Operation Manual

Network high speed ptz
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
Network High Speed PTZ
Operation Manual
Prior to operation, please carefully read this manual！
1

Advertisement

Table of Contents
loading

Related Manuals for Sony FCB-CH7500

Summary of Contents for Sony FCB-CH7500

  • Page 1 Network High Speed PTZ Operation Manual Prior to operation, please carefully read this manual！...
  • Page 2 Safety attentions: A flash of light in equilateral triangle is used for reminding user that “there are non-insulated dangerous voltage points nearby this product”, endanger the personnel safety. ！ An exclamation mark in equilateral triangle is used for reminding user of referring to the literal description about its 在正三角形中的注意号，用以提醒用户参考有关...
  • Page 3 Attention Electrical safety  The installation and use of this product must strictly comply with national and local electrical standards. It has self-provided power supply. Power is supplied to the product is: DC12V 5A (refer to product identification or connecting line identification). When you use, must be comply with all kinds of electric safety standard,use products self dedicated power adapter..RS-485 and video signal need has enough distance with high-tension apparatus device &...
  • Page 4  Environmental requirements Temperature: -35℃~+55℃ Humidity: 90% Air pressure: 86-106kpa  Installation request Install the device at a location with sufficient bearing capacity.  Do no store, install or use the product in an inflammable, explosive and dangerous area.  Do not install the product beyond the specified temperature, humidity or power specification.

  • Page 5: Table Of Contents

    CONTENT Chapter I Functions and features............................................7 1.1 PTZ Main features..............................................7 1.2 PTZ Specifications..............................................7 Chapter II Network menu Setting............................................9 2.1 ONVIF Discovery Tool configuration camera IP address................................. 9 2.2 Log in the network..............................................10 2.3 Video Activex install............................................... 11 2.4 Video preview.................................................
  • Page 6 4.1.2 Requirements for lifting equipment......................................43 4.2 Warning................................................... 43 4.3 Ambient requirements............................................43 4.4 Cabling safety.................................................44 4.5 Installation preparation............................................44 4.5.1 Basic requirements.............................................44 4.5.2 Check the space for installing and strength of structures..............................44 4.5.3 Check the structural strength........................................45 4.5.4 PTZ power-on self-test..........................................45 4.5.5 Please keep all packing materials of the PTZ..................................

  • Page 7: Chapter I Functions And Features

    Chapter I Functions and features 1.1 PTZ Main features IR night vision function, realize D/N monitoring, IR LED control & AIO ICR filter disc synchronous switch, to achieve perfect night vision effect  Max.Resolution up to 1080P（1920（H）×1080（V）/30fps）  New type of ultra-thin precision stepper motor drive, stable running, accurate positioning ...
  • Page 8 GB/T28181 Chinese standard Third part protocol VSIP Third part protocol Screen shot upload FTP server NTP Server time tick Speed: 120°/S，360° rotation endless Tilt Speed: 30°/S，Run range: -15°--+90° Preset 255pcs Cruise 8 groups Self-learning 8 groups Home Support Privacy mask 8pcs (It is according to the camera module) Focus limiting Support...

  • Page 9: Chapter Ii Network Menu Setting

    Chapter II Network menu Setting 2.1 ONVIF Discovery Tool configuration camera IP address In system CD,we support ONVIF Discovery Tool for user, it can used for device management test: Search IP camera or Video server device which in the network ...

  • Page 10: Log In The Network

    Due to each camera from factory, all the ID address are the same,so if before install Ip camera, you can use ONVIF Discovery Tool to configuration IP address. Use mouse to choose the device,input the device ONVIF protocol’s user name and password, double-click will pop-up current device’s information dialog box, can configurable IP address..etc.After modify, click”SAVE”, it will show you a tip to tell you are succeed, then click”Reboot”...

  • Page 11: Video Activex Install

    This chapter introduce how to access IP camera through web browser. This manual’s interface are under Windows XP and IE8. When through IE browser to preview IP camera’s image, need install VLC.EXE software firstly, after install, open IE, input IP address (Default: 192.168.1.8),Enter into log in interface.
  • Page 12 pop-up below dialog box: Choose install deposit disk, click [Install], continue to install...
  • Page 13 After install,as left picture,Click”Close”,finish install, close IE. Then Log-in PTZ IP address, can view video. Ps: If your Activex in your PC is old version,IE will pop-up information, to ask you install newest Activex version.

  • Page 14: Video Preview

    2.4 Video preview Note：It always has delay if transmission by IP, it depends on user’s PC CPU and qualities of switcher and router.Normally, MP IP ...
  • Page 15 video has <500ms delay. Area 1: Toolbar: Click into corresponding function ICON Explain Enter the image code stream, PTZ, camera control interface Into network parameters and speed dome function Settings Enter the picture management or local video playback and download System information display Player Activex download Exit user interface, back to Log-in interface...

  • Page 16: Ptz Control

    Area 4: PTZ control, camera specification,Peripherals management function. 2.4.1 PTZ control After open preview image, each key in the right of interface means: Speed key Setup PTZ rotation speed. Direction Control PTZ”up,top left,top right,down,left bottom,right bottom,right,left. Click icon,can call OSD menu Zoom Change lens zoom(invalid for auto Zoom camera) Focal...

  • Page 17: Camera Parameters

    2.4.2 Camera parameters After open device preview, choose right side “Camera”, specification as below:(Different camera module, specification will different) Camera brand Display camera brand Camera model Display camera model D-zoom ON/OFF Zoom speed Focus mode Auto/Manual ICR Mode Day/Night/Auto AE Mode Auto/Manual/SP/AV Shutter speed 1-1/10000...

  • Page 18: Advanced Setup

    2.4.3 Advanced setup After open device preview, choose”AUX”, parameters is as below: Night vision Mode OFF/ON/AUTO Period 0-60 Threshold 0-255 Gain 0-64 Wiper Mode One /limit/N time Time 10-600 Start Start wiper Stop Stop wiper Other Defrost User heater to defrost...

  • Page 19: Image Setup

    2.4.4 Image setup After open device preview, choose”Image”,parameters is as below: Noise reduction Enable Disable/ON/Auto Mode 2D/3D/3D+/Strong noise reduction/Mixed noise reduction Level 0-168 Edge enhance Enable Disable/ON Level 0-31 Image adjust Brightness 0-127 Contrast 0-127 Saturation 0-255 Flip Image up and down prevision Mirror Image left and right prevision Default setting...

  • Page 20: Device Parameters

    2.5 Device parameters 2.5.1 Network parameters Go into <Device parameters>→<Network parameters>.then you can setup network parameters. As other IP device, connect and use IP camera, must let IP camera’s IP address Full-Mesh as user PC’s IP address. Please note that: In the same LAN, IP address can not be the same, it will has clash, and let device can’t work.
  • Page 21 Note: All the parameters are provide by 28181 device, details please ask28181 server manager.

  • Page 22: Stream Setup

    2.5.3 Stream setup Enter<Device parameters>→<Stream setup>, can setting stream Stream type: Main stream, sub-stream,both of them are video stream, also can do customize setting for size,frame,rate,Frame interval, level. All these setting are used for adjust video (or preview) image quality and storage file bit. Main stream are default choose, sub-stream can be choose, but not default choose. Full frame rate is default output frame rate of camera,MAX.frame rate Frame interval: also means Key frame, 1 frame interval, will influence with image quality and stream.

  • Page 23: Record Setting

    Auto snapshot Auto capture can be close, also can transmission to SD card,FTP, also can uploading to SD card & FTP to save. Trigger set time means at regular intervals will capture a picture by PTZ. FTP uploading, address: FTP server address. PORT: FTP server port, default is 21,user name: FTP user name, PW: FTP pw, uploading path: FTP uploading path,default is Root directory, FTP mode: FTP server work mode, default is PASV.

  • Page 24: Video Setup

    When record time too long, can make video file integral point automatic subdivision,this can convenience to search or playback image file. When TF card’s free space is lower than setting value, will stop record or automatic to delete oldest record file then record again. 2.5.5 Video setup Input can set as 1080P25、1080P30、720P50、720P60, change this option will change camera video type,and influence coding and output video.

  • Page 25: Alarm Setup

    2.5.6 Alarm setup Alarm input property contain high lever and low lever two kinds, please according to join up alarm device and real using control type to choose suitable property. Normal close: at ordinary times open circuit, when has alarm signal trigger, it will processing circuit. Normally open: at ordinary times short circuit,when has alarm signal trigger , it will turn-off circuit.

  • Page 26: Interface Setup

     Auto flip: When camera come to the tilt position, pan can auto run 180°, ON/OFF for option.  Speed limit: When camera in high zoo, PTZ or speed dome will automatic let speed slow, ON/OFF for option  Park action: When this option Open, will open park action function. This means when in a while, user do not has any control or active, PTZ or speed dome will back to the original point.
  • Page 27 OSD menu)/TXT mode(Display TXT mode OSD menu)、subtitle position, typeface’s size, edge distance,code flow superposition, and other thing to edit. Edge distance means preview interface top left character the distance of video edge.
  • Page 28 When choose TXT mode will display below function menu, superposition divide to 3 TXT subtitle, TXT content can be custom English or Chinese or any other character, also can be PTZ or speed dome built-in common variations,through variations can catch some dynamic information. For instance: In “connect”...

  • Page 29: System Setup

    2.5.10 System setup It can setup timezone, local time,PW. Click”Restore factory setting” will change to factory setting. Click”Reboot” ,device will auto re-start. Before update, please confirm that update routine is copy in PC, choose”Browse” to add update file, click”upload”,screen will display above dialog box”...

  • Page 30: File Management

    2.6 File management Time quantum not write anything, Click search directly, will display all file which storage in TF.It can display: file name, time, file size, type,support file’s download and delete function. means this file is video, click this icon will open video file to playback, click will back to file management interface.

  • Page 31: System Information

    2.7System information General: Display PTZ or Speed dome’s model\ PTZ or  Speed dome’s inner temperature Version: ROM display is whole device’s version, this is  main version. GUI display is GUI module’s version, this module contain interface,PTZ control, protocol. MOTOR display is motor board’s software version, through this information can confirm motor board is suitable for main control module or not.

  • Page 32: Chapter Iii Osd Menu Setup

    Chapter III OSD menu setup This interface display, call 64 preset or click IE interface PTZ direction control middle , display below interface (Normal control has: Rocker down/up/left/right, IRIS +/-. Rocker up/down used for control move; left/Right key used for switch parameters , and right key can choose menu,too; IRIS + used to choose menu item;...

  • Page 33: Camera Setup

    Camera: Display camera module’s model  Temperature: Display current PTZ inner temperature.  3.3 Camera setup CAM Parameters: Enter camera parameters setup sub-menu  D-zoom: Setup digital zoom. ON/OFF  Zoom Speed: Zoom speed 0-7 adjustable.  Focus Mode: Camera focus mode,auto/manual ...

  • Page 34: Ptz Setup

    Privacy setting：Enter privacy mask setting sub-menu.  Privacy setting: 1-8 for option  Title: Enter privacy mask 1,then can setup title  Edit: Setup mask position and size  Clear: Clear setting and return  Save: Save setting and return. ...
  • Page 35 Chinese,English,No.punctuation mark..etc. Setup: Preset position edit.  Cll: Call preset which already set  Clear: Clear and return  Return: Save and return  Patrol setting: Enter patrol setup sub-menu  Patrol: 1-8 for option, when run patrol 1, can setup patrol 1 ...
  • Page 36 Scan Setting: Scan No. Choose,1-8 for option.  Scan Speed: Setup scan speed. 1-8 speed for option. Can set each scan.  Limit Edit: Setup scan’s start and end, then when enter, use joystick to move PTZ. Press OPEN key to save current position and return. ...
  • Page 37 Schedule setting: Enter schedule setting sub-menu  Schedule No.: Schedule 1-8 for option.  Title: Enter schedule No., can setup schedule title,it has Chinese,English,No.punctuation mark..etc. Date: Schedule edit,setup Sunday--Saturday  Time: Schedule time edit  Start hour: Start time setup, hour choose Start min: Start time setup, min.
  • Page 38 Alarm setting: Enter alarm setup sub-menu  Alarm:1 alarm  Title: Enter alarm title, can setup alarm title,it has Chinese,English,No. Punctuation mark...etc  Alarm Trigger: Choose trigger alarm’s condition, normally open /Normally close for option.  Priority: Setup alarm priority. Highest/High/Middle/Low for option. ...
  • Page 39 NV mode: Auto,ON,OFF  Nv CYCLE: Night vision surveillance cycle time setup,1-60s for option.  NV Threshold: Photosensitive resistance strength 0～255 for option.. When light is lower than this value, night vision device will auto open.  NV Gain: Adjust night vision light ,0-64 for option. ...

  • Page 40: System Setup

    Park time: Set park action time,means in how many time if PTZ or speed dome do not be controlled, it will be back to original point, 1-99mins for option.  Patrol freeze: During patrol, freeze image, ON/OFF for option.  Autoron: After power on come to re-set state, day mode/night mode/ patron 1-4/pattern1-4,preset1-4,scanning 1-4 OFF.
  • Page 41 OSD position: Default Top left,Middle top, Top right, left Middle,right,left bottom, right bottom for option.  Font Size: 12-28 for option  Edge: 0-128 for option.  Margins: Save setting and return.  Cancel: Cancel set up and return.  Network setting: Enter network setup sub-menu ...
  • Page 42 Input format:Setup input format:1080P25/1080P30/720P50/720P60 for optional.  OK: Save and return.   Cancel: Cancel setup and return. Compas setting: Setup North. Correct setup north, When PTZ run, can display current direction. Total 8 direction can display.  Factory setting: Setup back to factory setting sub-menu. ...

  • Page 43: Chapter Iv Ptz Installation Description

    Chapter IV PTZ Installation Description 4.1 Safety measures 4.1.1 Qualification of installation or maintenance workers  Submission of qualification certificate for CCTV system install or maintenance, and qualification certificates for relevant works (such as high altitude operations etc), these workers must have the following elementary knowledge and skills; ...

  • Page 44: Cabling Safety

    Temperature：-35℃～55℃ Humidity：90％ Power standard：DC12V/5A 4.4 Cabling safety  The signal transmission lines must keep a distance of at least 50m from high-voltage devices or high-voltage cables.  Outdoor cables should be laid under eaves if possible.  In open fields, cables shall be laid in sealed and earthed underground steel pipes and aerial cabling is forbidden. ...

  • Page 45: Check The Structural Strength

    Confirm whether there is enough space for installing this product and its members. 4.5.3 Check the structural strength 4.5.4 PTZ power-on self-test To ensure normal operation of the PTZ on the installation site, please connect the system control lines, video lines and power lines of the PTZ into the corresponding sockets before installation (the wiring shall strictly comply with the labeling instructions of system control lines, video lines and power lines) and do power-on self-test.

  • Page 46: Vehicle-Mounted Type Install (Directly Install On The Top Of Car) For Optional

    Main products chassis Prevent falling embolus 4.6.2 Vehicle-mounted type install (Directly install on the top of Car) for optional  Fixed tray install, M5*8 hexagonal screw contain spring washer & flat gasket , that need through sub-panel inside 5pcs screw,fixed on the main products chassis.
  • Page 47 As below picture: Install steps as below: Step 1: Strike wall bracket dead plate, use 5pcs (M5*8) hexagon socket head cap screw to fixed with PTZ, as F1 Step 2: Then use dead plate button insert into cradling piece, then use own screw to fasten, as F2 Step 3: Cradling piece use 4pcs * M6 anchoring to fixed with wall, as F3, then finish install 4.6.3.2 Telegraph pole to install：...

  • Page 48: Outgoing Lines Of Ptz

    4.7 Outgoing lines of PTZ Cable is as below picture, orange is RS485+, yellow is RS485- ...

  • Page 49: Annex I: Troubleshooting

    Annex I: Troubleshooting Problem Phenomenon Possible cause RS485 line port connect wrong. Can’t control PTZ Control protocol,ID or baud rate in RS485 of IP camera not same as IP camera’s IP address had been modified. If yes, please use ONVIF Can’t connect IP camera Discovery Tool to test IP and re-set IP address.

  • Page 50: Annex Ii: Lightning And Surge Protection

    Annex II: Lightning and surge protection This product adopts TVS pole lightning-proof technology to effectively protect against the damages of pulse signals such as transient lightning below 1.5KW, and surge etc to equipment. However, if mounted outdoor, the necessary protective measures must be provided as required: The signal line must be kept away from HV equipment or HV cable at least 50m ...

  • Page 51: Annex Iii: Maintenance Of The Terms Of Service

    Annex III: Maintenance of the terms of service 1、Warranty terms Within one year after delivered, if found any defects caused by materials or workmanships, the factory shall be responsible for free repair or replace;  The warranty period of all repaired or replaced parts shall be 90 days since delivered; ...

Table of Contents