Table of Contents
Advertisement
07-115 SSHP_II
5/7/07
4:00 PM
How to check for overlapping of central address Nos.
(1) Press the
and
time for more than 4 seconds.
and CODE No. C1 will flash.
(2) Select CODE No. C3 by pressing
( ) button and press the
C3 changes from flashing to ON state and
will flash. Then auto overlap checking will start.
(3) If C3 changes from ON to flashing and
stops flashing and disappears, there is no over-
lapping.
Then finally, complete the auto overlap checking
mode by pressing the
(4) If some of GROUP No., ZONE No. and UNIT No.
flash, you should try the zone registration again.
1
Select CODE No. C1 by pressing
( ) button and press the
2
Select the flashing GROUP No. with the ZONE
and GROUP buttons.
Then press the
ZONE, GROUP and UNIT No.
3
Then finally, complete the auto overlap
checking mode by pressing the
SC
Page 94
buttons at the same
,
button.
button.
,
button.
button and reselect the
button.
Fig. 8-11
94
- Quick Links:
- Indoor Unit
- Trouble Diagnostics
Hide quick links:
Advertisement
Table of Contents
