hit counter script
Cisco ASR 9000 Series Configuration Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 9000 Series
  6. Configuration manual

Cisco ASR 9000 Series Configuration Manual

Aggregation services router
Hide thumbs Also See for ASR 9000 Series:
Table of Contents

Advertisement

Quick Links

See also: Reference Manual , Configuration Manual
Cisco ASR 9000 Series Aggregation Services Router ROM Monitor
Configuration Guide, Release 5.1.x
First Published: 2014-07-01
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-30420-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 9000 Series

Summary of Contents for Cisco ASR 9000 Series

  • Page 1 Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x First Published: 2014-07-01 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-30420-01...
  • Page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
  • Page 3 Displaying the Configuration Register Setting Environment Variables Frequently Used Environmental Variables Displaying Environment Variable Settings Entering Environment Variable Settings Saving Environment Variable Settings Clearing Environment Variable Settings Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 4: Table Of Contents

    Reinstalling to a Cisco ASR 9000 Series Router from a TFTP Server Image Reinstalling to a Cisco ASR 9000 Series Router from a TFTP Server Image: Example Installing Cisco IOS XR Software on Cisco ASR 9000 Series Router from a USB Drive What to Do Next...
  • Page 5 Archiving Cisco IOS XR Image on a Local Disk: Example Restoring Cisco IOS XR Image from the local device Restoring Cisco IOS XR Image from the Local Device: Example Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 6 Contents Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 7 From Release 6.1.2 onwards, Cisco introduces support for the 64-bit Linux-based IOS XR operating system. Extensive feature parity is maintained between the 32-bit and 64-bit environments. Unless explicitly marked otherwise, the contents of this document are applicable for both the environments. For more details on Cisco IOS XR 64 bit, refer to the Release Notes for Cisco ASR 9000 Series Routers, Release 6.1.2 document.
  • Page 8 Preface Obtaining Documentation and Submitting a Service Request Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x viii OL-30420-01...
  • Page 9 This table summarizes the new and changed feature information for the Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Guide, and tells you where they are documented. For a complete list of new and changed features in Cisco IOS XR Software, Release 5.1.x, see the New and Changed Features in Cisco IOS XR Software, Release 5.1.x for Cisco ASR 9000 Series Aggregation Services...
  • Page 10 New and Changed ROMMON Features New and Changed Features in ROMMON Feature Description Introduced/Changed in Release Where Documented No new features in this release Release 5.1 Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 11 XR software when you power on or reload a router. A version of the ROM Monitor software exists on each card and is factory supplied. The ROM Monitor program provides an initial power-on environment for each card. If the Cisco IOS XR software is rebooted or unable to run, the corresponding card returns to the ROM Monitor mode.
  • Page 12 Understanding the Role of the Route Switch Processor (RSP) Card The Cisco ASR 9000 Series Router contains series of chassis slots, each of which can hold one of several types of line cards (LCs). Two slots in the chassis are reserved for route switch processors (RSP) cards that provide the central point for chassis provisioning and management.
  • Page 13 Some people get confused when they start to use ROM Monitor mode. It is important to remember that ROM Monitor mode is a router mode, not a mode within the Cisco IOS XR software. It is best to remember that ROM Monitor software and the Cisco IOS XR software are two separate programs that run on the same router.
  • Page 14 Connecting and Communicating with the Router in Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide. Step 3 admin Enters administration EXEC mode. Example: admin RP/0/RSP0/CPU0:router# Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 15 The default baud rate is 9600. To verify the configuration register setting, enter the show variables boot command in the administration EXEC mode. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 16 RP/0/RSP0/CPU0:router(admin)# Set to rom-monitor mode for all mgmt nodes: RP/0/RSP0/CPU0:router(admin)#config-register boot-mode rom-monitor location all Successfully set config-register to RP/0/RSP0/CPU0:router Successfully set config-register to RP/0/RSP0/CPU0:router Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 17 ROMMON. Repeat this process for both RSP cards. ROM Monitor Commands The commands in the ROM Monitor mode are different from those available in the Cisco IOS XR software. You can run ROM Monitor commands only while in ROM Monitor mode, and you cannot run Cisco IOS XR software commands.
  • Page 18 Displays the currently set ROM Monitor environmental settings. sync Saves the new ROM Monitor environmental settings. unset Removes an environmental variable setting. version Displays the ROM Monitor version. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 19 Commands are case sensitive. You can halt any command by pressing Ctrl-C. Note Displaying the Available ROM Monitor Commands: Examples The following example shows what appears when you enter the ? command on a Cisco ASR 9000 Series Router: rommon B1> ? alias...
  • Page 20 The ROM Monitor environment variables define the attributes of the ROM Monitor, such as the IP address for an RSP control Ethernet port or the location of the Cisco IOS XR software and describe how to load it. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x...
  • Page 21 Under normal operating conditions, you do not need to modify these variables. They are cleared or set only when you need to make changes to the way ROM Monitor operates. Before loading CISCO IOS XR software image in Cisco ASR 9000 Virtualized Service Module (VSM) Note Service Card, you must ensure that these environment variables are set at the LC ROMMON prompt: •...
  • Page 22 To display the current environment variable settings, enter the set command at the ROM Monitor mode prompt rommon B1> PS1=RO RSP P4D-17 ! > IP_ADDRESS=172.29.52.137 DEFAULT_GATEWAY=172.29.52.1 IP_SUBNET_MASK=255.255.255.0 TFTP_SERVER=172.23.16.81 IOX_ADMIN_CONFIG_FILE= TFTP_MGMT_INTF=0 Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 23: Viewing Chassis Serial Numbers

    The chassis serial number can be read from an RSP that is running in ROM Monitor mode. Viewing the chassis number from the RSP may be necessary if the physical label is missing or damaged. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 24: Exiting Rom Monitor Mode

    Respond to each prompt as instructed. See the example that follows this procedure for more information. Step 3 reset Resets and initializes the router. Example: rommon B2> reset Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 25: Resetting To Exec Mode Or Mbi Validation Mode

    [n]: change the boot characteristics? y/n [n]: enter boot type: 0 = ROM Monitor 2 = MBI Validation Boot Mode [0]: Configuration Summary Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 26: Attaching To Primary Rsp From Standby Rsp

    To reset to the MBI validation mode or EXEC mode, select 2 as the boot type. Enter the reset command to boot the RSP in the EXEC mode. MBI validation mode causes the RSP to boot the startup Cisco IOS XR software and configuration. Note...

  • Page 27: Additional References

    (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 28 ROM Monitor Overview Additional References Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 29: Router Recovery With Rom Monitor

    Information About Router Recovery The standard way to install new software on the RSP card of a Cisco ASR 9000 Series Aggregation Services Router is by using the install command in administration EXEC mode. However, if the RSP card is unable to boot the Cisco IOS XR software or you want to completely replace the existing software, you can reinstall the software while the RSP card is in ROM Monitor mode.

  • Page 30: About Rommon Installation Files

    We recommend installing or upgrading software packages from administration EXEC mode using PIE files, as described in the Upgrading and Managing Cisco IOS XR Software module of the Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide.

  • Page 31: Tar Filenames And Version Numbers

    Filenames and Version Numbers The files that you can install from ROM Monitor have a vm filename extension. These files contain the software included in the Cisco IOS XR Unicast Routing Core Bundle. The other files in the packages are PIE files.

  • Page 32: Vm Filenames And Version Numbers

    • Maintenance releases usually do not require a router reboot. vm Filenames and Version Numbers The format for a vm filename for Cisco ASR 9000 Series Aggregation Services Routers is: platform-package_name.vm-major.minor.maintenance The table below describes the other filename components.

  • Page 33: About The Turboboot Variable

    ◦ Bug fixes • The minor release version does not have to be identical for all software packages operating on the router, but the operating packages must be certified by Cisco as compatible with each other. • A minor release may require a router reboot.

  • Page 34: About The Boot Device (Destination Disk)

    When you install Cisco IOS XR software using the Turboboot method in ROM Monitor mode, you must specify a boot-device for the router. The boot device is the local disk on the RSP card where the Cisco IOS XR software is installed.

  • Page 35: Reinstalling Cisco Ios Xr Software On Cisco Asr 9000 Series Router

    • Load the Cisco IOS XR software from a vm file on a TFTP server to the RSP. • Transfer the vm file to a local storage device and then load the Cisco IOS XR software from that storage device to the RSP.

  • Page 36: Reinstalling To A Ciscoasr 9000 Seriesrouter From A Tftp Server Image

    The recommended boot device is disk0:. 8 On the active RSP, boot the Cisco IOS XR software from a vm file on the TFTP server. 9 Reset all other RSPs to boot the Cisco IOS XR software.
  • Page 37 10. On the RSP card , boot the vm image located on the tftp server. Use boot tftp://server/directory/filename 11. Reset all other RSP cards to boot the Cisco IOS XR software. Use confreg and reset commands. 12. Restore disk mirroring, if it was disabled in “Step...
  • Page 38 If this is the case, ignore the message and continue. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 39 B8> TFTP_SERVER=223.255.255.254 rommon B9> TFTP_MGMT_INTF=0 • TFTP_MGMT_INTF determines the RSP card Management LAN port to use for TFTP. The default value is port 0. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 40 • Sets the configuration register to automatically start the boot process instead of staying in ROM Monitor mode. rommon B4> confreg rommon B5> reset • Resets the RSP card and starts the boot process. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 41: Example

    B6 Reinstalling to a Cisco ASR 9000 Series Router from a TFTP Server Image: Example The following example shows how to install the Cisco IOS XR software from the TFTP server: Place all RSPs in ROM Monitor mode: admin...

  • Page 42: Drive

    Router Recovery with ROM Monitor Installing Cisco IOS XR Software on Cisco ASR 9000 Series Router from a USB Drive Installing Cisco IOS XR Software on Cisco ASR 9000 Series Router from a USB Drive Before You Begin Verify that the following prerequisites are met: •...
  • Page 43 Router Recovery with ROM Monitor Installing Cisco IOS XR Software on Cisco ASR 9000 Series Router from a USB Drive Command or Action Purpose Step 4 Insert the USB into the slot on the RSP. Use the Reboots into the ROMMON mode and detects the newly inserted reload location all command.

  • Page 44: What To Do Next

    System Interfaces in the • Install additional software from the PIE files, as necessary. For more information, see the Upgrading and Managing Cisco IOS XR Software module of Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide. Additional References The following sections provide references related to the ROM Monitor.

  • Page 45: Technical Assistance

    (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 46 Router Recovery with ROM Monitor Technical Assistance Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 47: Managing Configuration Files In Rom Monitor

    SDR name and node inventory. • There is only one SDR configuration file in Cisco ASR 9000 Series Router, which is stored on the RSP to specify the parameters for routing, interfaces, SDR usernames, and other SDR-specific configurations.

  • Page 48: Specifying An Alternative Administration Configuration

    With this method, the specified configuration file is used for a single router boot. If the RSP is reset again, the permanent configuration file is used. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 49 2 = MBI Validation Boot Mode [0]: 0 Step 4 reset Makes the configuration register settings for the standby RSP card effective. Example: rommon B2> reset Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 50 [n]: enable "diagnostic mode"? y/n [n]: change console baud rate? y/n [n]: change the boot characteristics? y/n [n]: enter boot type: 0 = ROM Monitor Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 51: Iox_Admin_Config_File= Variable

    IOX_ADMIN_CONFIG_FILE= environment variable while in ROM Monitor mode. Specifying the environment variable forces the use of the specified file for all boots while this variable is set. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 52 Sets the boot type as 0 to enable ROM Monitor mode during the next system boot. Example: enter boot type: 0 = ROM Monitor 2 = MBI Validation Boot Mode [0]: Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 53 B3> with the -o option. IOX_ADMIN_CONFIG_FILE=/disk2:/cfgarchives/ admingold.conf Step 9 sync Saves the changes. Example: rommon B4> sync Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 54: Specifying An Alternative Sdr Configuration

    You can specify an alternative configuration for the default-SDR from ROM Monitor mode, using the methods described in the following sections. These procedures are run from the RSP card for the default-SDR. For more information on SDR, see the Configuring Secure Domain Routers on Cisco IOS XR Software Note module of Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x...

  • Page 55: Specifying A Temporary Sdr Configuration File With The -A Boot Option

    Enter the confreg command at the ROM Monitor mode Example: prompt to set the configuration register to ROM Monitor rommon B1 > confreg mode. You can also change the console baud rate, boot Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 56 EXEC mode during the next system boot. Example: enter boot type: 0 = ROM Monitor 2 = MBI Validation Boot Mode [0]: Step 7 Displays the current environment variable settings. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 57 Resets the standby RSP card so that the new setting can take effect and the standby RSP card becomes operational. Example: rommon B5 > reset Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 58: Specifying A Permanent Sdr Configuration File With The Iox_Config_File= Variable

    You can also change the console baud rate, boot characteristics, boot type configuration settings, and enable Configuration Summary diagnostic mode at the ROM Monitor mode. (Virtual Configuration Register: 0x1920) Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 59 EXEC mode during the next system boot. Example: enter boot type: 0 = ROM Monitor 2 = MBI Validation Boot Mode [0]: Step 7 Displays the current environment variable settings. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 60 EXEC mode during the next system boot. Example: enter boot type: 0 = ROM Monitor 2 = MBI Validation Boot Mode [0]: Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 61: Specifying An Alternate Storage Location For Configuration Files

    B1 > type configuration settings and enable diagnostic mode at the Configuration Summary ROM Monitor mode. (Virtual Configuration Register: 0x1920) Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 62 EXEC mode during the next system boot. Example: enter boot type: 0 = ROM Monitor 2 = MBI Validation Boot Mode [0]: Step 7 Displays the current environment variable settings. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 63 EXEC mode during the next system boot. Example: enter boot type: 0 = ROM Monitor 2 = MBI Validation Boot Mode [0]: Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 64: Additional References

    (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 65: Password Recovery In Rom Monitor Mode

    In this case, you must bypass the ksh authentication via the auxiliary port. Recovering the Root Password on Single-RSP Routers Use the following procedure to recover the router password from a router with a single RSP: Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 66 'Administration configuration committed by system'. Use 'show configuration commit changes 2000000009' to view the changes. Use the 'admin' mode 'configure' command to modify this configuration. User Access Verification Username: user Password: RP/0/RSP0/CPU0:router# Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 67: Recovering The Root Password On Redundant-Rsp Routers

    Press Return at the prompt to enter the password recovery dialog. Then enter the The router password is recovered new root-system username and password and save the configuration, as shown in successfully. the following example: Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 68: Bypassing Ksh Authentication

    • Inability to determine the node ID of the RSP card(Active RSP) For information and instructions to bypass ksh authentication, see the Configuring AAA Services on Cisco IOS XR Software chapter of Cisco ASR 9000 Series Aggregation Services Router System Security Configuration Guide.

  • Page 69: Additional References

    (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 70 Password Recovery in ROM Monitor Mode Additional References Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 71: Upgrading And Downgrading Rom Monitor Firmware

    The ROM Monitor, which is also known as ROMMON, is a bootstrap program that initializes the hardware and boots the Cisco IOS XR firmware when you power on or restart a Cisco ASR 9000 Series Router. ROM Monitor upgrades can be required to resolve firmware defects or support new features. Typically, ROM Monitor upgrades are infrequent and not required for every Cisco IOS XR software upgrade.

  • Page 72: Rommon A And Rommon B

    ROMMON A and ROMMON B Each node in a Cisco ASR 9000 Series Router includes two copies of ROM Monitor: ROMMON A and ROMMON B. During power on, ROMMON A loads first. If ROMMON A detects the presence of ROMMON B, it checks the compatibility and integrity of the ROMMON B code.

  • Page 73: Upgrading Or Downgrading Rom Monitor Using The Fpd Pie

    Serial Interface Processors (SIPs) and shared port adapters (SPAs), including FPGAs. Cisco IOS XR software provides the Cisco FPD upgrade feature to manage the upgrade of FPD images on SIPs and SPAs. For more information on upgrading FPDs, see Upgrading FPD on Cisco IOS XR Software module in the Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide.
  • Page 74 If you are upgrading a router with a single RSP, Continues to perform a cold restart of all nodes. or want to perform a cold restart on all nodes, go to Step 11. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 75 Use the show platform command to view all the nodes in the system. Verify that all the reloaded nodes are in the “IOS XR RUN” state. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 76: Troubleshooting Tips

    • If both ROMMAN B and ROMMON A are damaged due to an unexpected node reset or a power interruption during the upgrade, the affected route processors must be returned to Cisco for repair. • If a lower version of the ROM Monitor is detected based on the version check performed during system boot, following error message is displayed: RP/0/RSP1/CPU0:Nov 19 07:19:02.628 : rommon_fpd_agent[308]:...

  • Page 77: Rom Monitor Upgrades: Examples

    The following example shows how to upgrade the ROM Monitor image when a lower version of ROM Monitor firmware is detected. In the example, the ROM Monitor image for the 0/RSP1/CPU0 node ID is updated: upgrade hw-module fpd rommon location 0/RSP1/CPU0 RP/0/RSP0/CPU0:router(admin)# Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 78 ============ ======================== ======= ==== ======= ==== =========== ==== 0/RSP0/CPU0 A9K-RSP-4G fpga3 1.18 fpga1 1.05 fpga2 1.15 1.02 fpga4 3.08 hsbi 4.00 rommon 1.04 -------------------------------------------------------------------------------- 0/RSP0/CPU0 ASR-9010-FAN 4.00 -------------------------------------------------------------------------------- Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 79 One or more FPD needs an upgrade or a downgrade. This can be accomplished using the "admin upgrade hw-module fpd" CLI. The following example shows how to upgrade ROMMON B: Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 80: Graceful Reload Of A Cisco Asr 9000 Series Router: Example

    % Successfully upgraded 1 FPD for A9K-RSP-4G-HDD on location 0/RSP1/CPU0 hw-module location 0/RSP1/CPU0 reload RP/0/RSP0/CPU0:ios(admin)# Graceful Reload of a Cisco ASR 9000 Series Router: Example In the following example, a Cisco ASR 9000 Series Router is gracefully reloaded following a ROM Monitor firmware upgrade or downgrade: cfs check RP/0/RSP0/CPU0:router# Creating any missing directories in Configuration File system...OK...
  • Page 81 0/6/CPU0 A9K-8T/4-E IOS XR RUN PWR,NSHUT,MON hw-module location 0/0/CPU0 reload RP/0/RSP1/CPU0:router(admin)# WARNING: This will take the requested node out of service. Do you wish to continue?[confirm(y/n)] Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 82 A9K-2T20GE-B fpga1 0.42 fpga2 0.16 2.02 cpld2 0.11 cpld1 0.19 cpld3 0.09 rommon 1.03 -------------------------------------------------------------------------------- 0/2/CPU0 A9K-2T20GE-B fpga1 0.42 -------------------------------------------------------------------------------- 0/3/CPU0 A9K-SIP-700 0.31 fpga1 0.22 3.03 Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 83: Additional References

    Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference System management commands Cisco ASR 9000 Series Aggregation Services Router System Management Command Reference Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 84 (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 85: Image Refresh Using The Archive And Restore Feature

    Services Routers can be backed up and restored using the Archive and Restore feature. This Archive and Restore feature is built into the Cisco ASR 9000 Series Routers Micro Image. A Micro Image is a factory supplied service image that is locally resident on all Cisco ASR 9000 Series Routers RSP cards. A Micro Image allows administrators to perform these service tasks: •...

  • Page 86: Prerequisites

    Archiving Cisco IOS XR Image on a Local Disk The Cisco IOS XR software and configuration files can also be saved on a local storage device, such as a compactflash disk. You can backup the content of the active RSP card on the compactflash disk. This process creates a backup of these media devices and variables on the compactflash device: •...

  • Page 87: Archiving Cisco Ios Xr Image On A Local Disk: Example

    Mon Nov 23 19:16:48 2009 LOST.DIR 919867392 bytes total (919859200 bytes free) format compactflash: RP/0/RSP0/CPU0:Router# Fri Nov 20 00:37:13.432 UTC Format will destroy all data on "compactflash:". Continue? [confirm] Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 88: Restoring Cisco Ios Xr Image From The Local Device

    Restoring Cisco IOS XR Image from the local device Restoring means refreshing the content of the active RSP card. Restoring refreshes the Cisco ASR 9000 Series Routers with images from the compactflash device. The content of these devices and a few variables get updated.
  • Page 89 ROMMON prompt. This command lets you restore a previously-archived image. Example: rommon B9> boot hsbi: Step 3 format_all Enter format_all command on the standby RSP. Example: # format all Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

  • Page 90: Restoring Cisco Ios Xr Image From The Local Device: Example

    To format HD, eUSB and bootflash: ksh /etc/format_all (diskboot) To edit Power Module cookie: pwrcookie <module_num> edit *********************************************** format_all Step 1/6: format bootflash Formatting sector 1 Step 2/6: format HD Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 91 Restoring image to bootflash: from compactflash: Please wait ... Restored archive of bootflash: from compactflash: Restoring common NVRAM variables Set BOOT=disk0:asr9k-os-mbi-3.9.0.31I/mbiasr9k-rp.vm,1; 395.58s real 2.51s user 2.53s system Restore from compactflash: success Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...
  • Page 92 Image Refresh Using the Archive and Restore Feature Restoring Cisco IOS XR Image from the Local Device: Example Cisco ASR 9000 Series Aggregation Services Router ROM Monitor Configuration Guide, Release 5.1.x OL-30420-01...

Table of Contents