Acknowledging Safety-Related Errors; Safety Critical Error" Device Mode - Siemens SITRANS Series Operating Instructions Manual
Pressure transmitter ma/hart
Hide thumbs
Also See for SITRANS Series:
- Compact operating instructions (80 pages) ,
- Compact operating instructions (60 pages)
Table of Contents
Advertisement
Functional Safety
10.3 Acknowledging safety-related errors
10.3
Acknowledging safety-related errors
10.3.1
"Safety critical error" device mode
Introduction
When a safety-related error is detected on the device, the current output signal corresponds
to the fault current and the diagnostic message is displayed.
Figure 10-3
Acknowledge the safety-related error with the "Functional Safety" parameter [29] via local
operation or via the menu command "Functional Safety" through remote operation.
(Page 169)
The device then restarts and returns to the "Functional Safety disabled" device mode.
Note
The system shows unexpected data or behaves differently than described in this procedure.
● Repeat the entire procedure.
Note
Damaged device
● Replace the device.
See also
Select fault current [10] (Page 120)
168
Parameter view of the display
SITRANS P320/P420 (mA/HART)
Operating Instructions, 06/2018, A5E44852162-AA
- Quick Links:
- Commissioning the Device with Display
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
