Table of Contents
Advertisement
Advanced settings
Using the CUSTOMIZE menu
to adjust the receiver
You can adjust various receiver settings using
the CUSTOMIZE menu.
1
Press MAIN MENU repeatedly to select
"CUSTOM".
2
Turn MENU to select the parameter you
want to adjust.
For details, see "CUSTOMIZE menu
parameters" below.
3
Turn –/+ to select the setting you want.
The setting is entered automatically.
4
Repeat steps 2 and 3 to adjust the other
items.
CUSTOMIZE menu parameters
The initial setting is underlined.
x MENU XXX (Menu expanding)
• EXP.
The advanced parameters for the SPEAKER SETUP
and LEVEL menus are displayed and can be
adjusted.
For details on each setup item, see pages 19, 42 and
45–46.
• STD
The advanced parameters for SPEAKER SETUP and
LEVEL menus are not displayed.
x
96 XXXX
DTS 96/24
(DTS 96/24 decoding mode)
• AUTO
When a DTS 96/24 signal is input, it is played back
at 96 kHz sampling frequencies.
• OFF
Even when a DTS 96/24 signal is input, it is played
back at 48 kHz sampling frequencies.
Notes
• This parameter is valid only when you use a sound
field selected with the A.F.D. button (page 35). In
other sound fields, this parameter is automatically set
to "OFF".
• Even when a DTS 96/24 signal is input, standard 48
kHz decoding is used if any speakers are set to
"SMALL" or if the sub woofer is set to "NO".
GB
44
x SB XXXX
(Surround back decoding mode)
You can also press SURR BACK DECODING to
select the surround back decoding mode (page 39).
For details on each decoding mode, see page 40.
• OFF
• AUTO
• ON
Note
This parameter is valid only when you use a sound
field selected with the A.F.D. button except for Dolby
Pro Logic IIx mode (page 35).
x S.F XXXX (Sound field link)
• LINK
Lets you apply the last selected sound field to an
input whenever it is selected. For example, if you
select HALL for the SA-CD/CD input, then change
to a different input and return to SA-CD/CD, HALL
will automatically be applied again.
• FIX
Sound field link is not activated.
x A.V.SYNC.XX
(Time alignment)
Initial setting: 0 (0 ms)
Lets you delay the audio output so that the time gap
between the audio output and visual display is
minimized. You can adjust from 0 (0 ms) to 20
(200 ms) in 1 (10 ms) steps.
x DEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
The initial setting is "DEC. AUTO" for VIDEO 3 and
TV/SAT, and "DEC. PCM" for DVD, MD/TAPE and
SA-CD/CD.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to "DEC.
PCM".
Note
When set to "DEC. AUTO" and the sound from the
digital audio jacks (for SA-CD/CD, etc.) is interrupted
when playback starts, set to "DEC. PCM".
- Quick Links:
- 3: Connecting Speakers
- Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
