Programmable Mirroring (G50.1, G51.1) - Siemens Sinumerik 840D sl Programming Manual
Iso milling
Hide thumbs
Also See for Sinumerik 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
3.2.4
Programmable mirroring (G50.1, G51.1)
G51.1 can be used to mirror workpiece shapes on coordinate axes. All programmed
traversing movements are then executed as mirrored.
Figure 3-10
Format
X, Y, Z: Positions and mirroring axis
G51.1: Command for activating the mirroring
Mirroring takes place on a mirroring axis which is parallel to X, Y or Z and whose position is
programmed with X, Y or Z. G51.1 X0 is used to mirror on the X axis, G51.1 X10 is used to
mirror on a mirroring axis that runs 10 mm parallel to the X axis.
ISO Milling
Programming Manual, 06/09, 6FC5398-7BP10-1BA0
Programmable Mirroring
3.2 Defining the input modes of the coordinate values
Motion commands
51
- Quick Links:
- Display of the G Code
- M Functions
- G Code Table
Hide quick links:
Advertisement
Table of Contents
