Table of Contents
Advertisement
Set up the onboard RAID system (Create Volume)
1. Switch on the device or restart it.
2. Immediately after turning on the device, as soon as the message "
options
3. From the firmware selection menu, using the arrow keys, select the entry "Device
Management" and confirm your selection.
4. From the "Devices List", select the entry "Intel <R> Rapid Storage Technology".
5. Select under "Create RAID Volume".
6. On the next screen, assign a name for the RAID system.
7. Select "RAID Level" and select the entry "RAID1" in the following selection window. A list
of the available drives is displayed.
8. Under "Select Disc" select the drives
and confirm your selection.
– The mounted drive is provided with a check mark in the list
– You will find the assignment of the drive to the installation location in the drive cage
9. Select "Create Volume".
The following screen shows the details on the RAID system just set up (RAID Volume).
The onboard RAID system is set up.
10. Press the <Esc> multiple times in succession until you reach the "Main Page" of the
firmware/BIOS menu.
Note
Confirm "Exit Discarding Changes" message with "YES"
If when exiting the firmware/BIOS menu with the <Esc> button, the warning message
"Exit Discarding Changes" is displayed, confirm this message with "Yes".
The prenumbered settings are saved nonetheless and you can leave the firmware/BIOS
menu.
11. In the Main Page of the firmware/BIOS menu, select "Continue".
Your device continues the boot operation and switches on.
SIMATIC IPC677E
Operating Instructions, 04/2019, A5E45117996-AA
" appears, press and hold the <Esc> button.
after the drive name, see
①
that you want to integrate into your RAID system
③
.
Operating the device
5.3 Operating RAID systems
Press ESC for boot
②
.
61
Hide quick links:
Advertisement
Table of Contents
