Table of Contents
Advertisement
Available languages
Available languages
3. Touch and hold down
(Knitterschutz) and
(Zeitwahl) buttons at the same time.
One of 2 configurations is possible:
• the tank (Behälter) indicator:
on if the symbol
10. CARE AND CLEANING
10.1 Cleaning the filter
At the end of each cycle the
(Sieb) symbol comes on the display and
you must clean the filter.
The filter collects the fluff
during the drying cycle.
1. Open the door. Pull the filter up.
2. Push the hook to open the filter.
3. Use a moist hand to clean both parts
of the filter.
Anticrease
Time Dry
is
appears
filter
4. If necessary, clean the filter with a
5. If necessary, remove fluff from the
10.2 Emptying the water
container
Empty the condensed water container
after each drying cycle.
If the condensed water container is full,
the programme stops automatically. The
- the water container indicator is
permanently activated
• the tank (Behälter) indicator:
off if the symbol
- the water container indicator is
permanently deactivated
vacuum cleaner. Close the filter.
filter socket and gasket. You can use
a vacuum cleaner. Place the filter
back inside the filter socket.
tank (Behälter) symbol comes on the
ENGLISH
17
is
appears
Advertisement
Chapters
Table of Contents
