Table of Contents
Advertisement
4−Playback operations
Selecting by track number
Using the number keys on the remote control, the num-
ber of the desired track can be entered directory. Even
numbers with two or three digits can be entered easily.
For example:
Track 9: press '9' and 009 will be displayed.
Track 12: press '1' and '2' and 012 will be displayed.
Track 103: press '1' and '0' and '3' and 103 will be
displayed.
Track search
Normal search
1 Press the ∆ / ˚ search key continuously on the
front panel, or the SEARCH ∆ / ˚ key on the
remote control.
Direct search
By specifying time from the start of a certain track, you
can start playback from a specified point of a specified
track.
Basic operation
1 During stop, play or playback standby modes, use
the number keys on the remote control to input the
three-digit track number (such as 002 for track 2),
then the desired elapsed time (***min **sec) from the
start of that track.
Example: To specify 1 min 30 sec from the start of
track 2, input "002 001 30".
During input, the counter in the display will flash.
Pressing the CLEAR key cancels the input at any
stage during input.
NOTE
Regardless of the time display mode (refer to "Time dis-
play switching on page 18), the time from the start of
the specified track is displayed.
During stop or playback modes, when the final digit
is entered, the desired position is automatically lo-
cated and playback will begin from the desired point.
During playback standby mode, at the desired point
the unit will enter playback standby mode.
NOTE
≠ If a point which does not exist is entered, setting op-
eration will be cancelled.
16
TASCAM CD-RW900
After input, press the PLAY key to start playback. Or,
the READY key to cue the track at its head position
and enter playback standby mode.
You can also enter the track number and start playback
by pushing the MULTI JOG dial or using the ENTER
key.
NOTE
This function cannot be used in Program or Random
mode.
2 To stop the search function, simply release the
∆ / ˚ or the SEARCH key.
NOTE
The search function does not operate with MP3 discs.
≠ The direct search function cannot be used in pro-
gram or random mode.
≠ For MP3 discs, time cannot be specified within a
track. However, if you input the three-digit track
number, playback will begin from the start of that
track.
Operation variations
Even if the final second is not input, playback will begin
from the selected point after pressing the ENTER or
PLAY key. Or, if you press the READY key, the unit will
enter the playback standby mode at the selected point.
Specifying a track number only
After inputting the track number, press the ENTER
or PLAY key to begin playback of that track, or the
READY key to cue the track and enter playback
standby mode.
NOTE
Instead of inputting the three-digit track number, you
can input only the desired track number.
Example: To specify track 3, input only "3".
Specifying to the minute
After inputting the three-digit track number and the
number of minutes after the start of the track, press
the ENTER or PLAY key to begin playback of that
track, or the READY key to cue the track and enter
playback standby mode.
Example: To specify 1 min 00 sec from the start of
track 2, input "002 001"
NOTE
Following the above example, if "0021" is input, the
same position will be located.
Advertisement
Table of Contents
