Tascam CD-RW901 Owner's Manual page 14
Cd rewritable recorder
Hide thumbs
Also See for CD-RW901:
- Owner's manual (40 pages) ,
- Technical documentation (3 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
2 − Features of the CD-RW901
q
Use this key to switch Auto
AUTO TRACK key
Track mode on and off.
w
Use this key to enter record ready
RECORD key
mode.
e
SYNC REC key
Use this key to turn synchronized
recording on and off (see "Synchronized recording"
on page 27 for details).
r
SEARCH keys ( ∆ / ˚ )
the playback position inside a track.
t
keys Use these keys to move
SKIP (Â/¯)
between tracks when playing back (equivalent to
rotating the
MULTI JOG
y
STOP key
Use this key to stop playback or record-
ing.
u
OPEN/CLOSE key
Opens and closes the disc tray.
i
Number keys (0 through 9)
direct entry of track numbers when playing back, or
making a programmed play list.
o
Clears a mistaken entry made with the
CLEAR key
number keys.
In the program mode, pressing this key cancels the
program entered at the last.
It also acts like the
ESCAPE
p
Pressing this key is equivalent to press-
ENTER key
ing the
dial to confirm an entry.
MULTI JOG
a
INC PLAY key
Use this key to switch Incrementl
playback on or off.
s
MENU key and +/– key
turns the mode on or off. The
select menu options and make settings during Menu
mode.
d
PITCH key and +/– key
Pitch Control on and off, and set the pitch value.
f
ERASE key
Erases tracks (CD-RW discs only), or a
whole disc, or to refresh a "bad" disc, or to unfinal-
ize a finalized disc (see "Erasing" on page 32 for
details).
g
Finalizes recordable discs. See
FINALIZE key
"Finalizing" on page 31 for details.
h
Use this key when recording, to
REC MUTE key
mute the input signal for about four seconds and
then to enter record ready mode (see "Rec mute
function" on page 30).
j
INPUT SEL key
Use this key to select the different
audio inputs and the input combinations (see "Input
selection" on page 25 for full details).
1
TASCAM CD-RW901
Use these keys to move
dial).
Use these keys for
key in the Menu mode.
Pressing the
MENU
key
+/– key
is used to
Use this key to switch
k
Pressing this key locates a track to the
CALL key
last point where playback was previously started in
playback ready mode, and puts the unit into play-
back ready mode.
During recording, pressing this key assigns an index
number manually.
l
READY key
Use this key to standby for playback or
recording.
;
Use this key to start playback, or enter
PLAY key
record mode from record ready mode.
Advertisement
Table of Contents
