Step 7: Backguard Installation - Thermador PRO-GRAND PD30 Installation Instructions Manual

Professional dual fuel ranges

Hide thumbs Also See for PRO-GRAND PD30:

Care and use manual (88 pages)

Installation instructions manual (48 pages)

Table of Contents

Available languages

The backguard must be attached before sliding the

range into the final installed position. A Low Back or

Pot and Pan Shelf must be installed when there is less

than a 12" clearance between combustibles and the

back of the range above the cooking surface. (See

Fig. 2A and 2B on Page 5).

An Island Trim is available for covering the backguard

mounting flanges for island installations, where there

is a minimum of 12" of horizontal clearance behind the

island trim. (See Fig. 2B on Page 5).

The backguard is inserted, as shown in Fig. 13, into

the guide channels on the back of the range. Secure

the backguard with the (4) sheet metal screws pro-

vided.

WARNING

To avoid possible burn or fire hazard, a

backguard designed specifically for this

range must be installed whenever the

range is used.

CAUTION

The Pot and Pan Shelf can get very hot!

DO NOT place the following items on top

of the Pot and Pan Shelf:

- plastics or containers that can melt

- flammable items

- a total load over 30 pounds (13.6kg)

Chart C: BACKGUARD KIT MODEL NUMBERS

MODEL

30"

36"

48"