Step 7: Backguard Installation - Thermador Professional Series Installation Instructions Manual
Duel fuel ranges
Hide thumbs
Also See for Professional Series:
- Recipes (148 pages) ,
- Use and care manual (104 pages) ,
- Installation manual (76 pages)
Advertisement
Available languages
Available languages
Step 7: Backguard
installation
The backguard
must be attached
before
sliding the
range into the final installed
position.
A Low Back or
High Shelf backguard
must be installed when there is
less than a 12" clearance
between
combustibles
and
the back of the range above the cooking surface. (See
Fig. 2A and 2B on Page 7).
An Island Trim is available
for covering the backguard
mounting
flanges for island installations,
where there
is a minimum
of 12" of horizontal
clearance
between
combustibles
and the back of the range. (See Fig. 2B
on Page 7).
The backguard
is inserted,
as shown in Fig. 14, into
the guide channels
on the back of the range. Secure
the backguard
with the (4) sheet metal screws
pro-
vided.
Front of Unit
I
L
Chart
C: BACKGUARD
KIT MODEL
NUMBERS
RANGE
MODEL
NO,
9" STD.
LOW
HACK
12"
LOW
HACK
22"
HIGH
SHELF
PD304
Included with Range
NiA
HS30R
PD36
NiA
LB36R
HS36R
PD48
N!A
LB48R
HS48R
Backguard
Installed
3°3/4" ISLAND TRIM
IT30R
IT36R
IT48R
17
Advertisement
Chapters
