Advertisement
Quick Links
LifeBook P-103x
Disassembly Procedure
1. To begin the disassembly proce-
dure, make sure the unit is powered
off. Remove the battery.
3. Turn the modem cover over and
detach the modem cable from the
card.
T e c h n i c a l
2. Remove five screws securing the
hard disk drive and modem covers.
4. Also detach the LAN cable. Press
the locking clip to release the
modem card and pull it out of its
socket.
P r o c e d u r e
Advertisement
Related Manuals for Fujitsu LifeBook P-103 Series
Summary of Contents for Fujitsu LifeBook P-103 Series
- Page 1 T e c h n i c a l P r o c e d u r e LifeBook P-103x Disassembly Procedure 2. Remove five screws securing the 1. To begin the disassembly proce- hard disk drive and modem covers. dure, make sure the unit is powered off.
- Page 2 6. Remove seven case screws. Pry off 5. Detach the hard disk drive’s flex the unit’s feet and remove the two cable and lift the drive from its bay. screws beneath. 8. Underneath, unlock and remove the keyboard’s flex cable. 7.
- Page 3 12. Detach the main LCD cable. Lift 11. At the rear, remove the two hinge off the LCD. screws. 13. Remove the screw securing the 14. At the front, detach the cable from upper cover. the click assembly. Lift off the upper cover.
- Page 4 17. Remove the two screws securing 18. At the upper right, detach the DC the USB board and lift it off. board cable. 19. Detach the speakers’ cable at the 20. Lift out the motherboard and turn lower right. it over. Detach the bridge bat- tery’s cable from the motherboard and lift the battery off.
- Page 5 24. Remove the screw securing the 23. Remove two screws securing the LCD panel and tilt it up. status LCD and lift off its cover. 26. Detach the LCD’s cable to the 25. Detach the LCD’s cable from the inverter card. controller board.
- Page 6 29. Detach its cable to the control 30. Remove two screws securing the board and lift out the status LCD. wireless LAN antennae and left hinge. 31. Detach the LAN cable and lift it 32. Remove the antennae from its out.
-
Page 7: Assembly Procedure
T e c h n i c a l P r o c e d u r e LifeBook P-103x Assembly Procedure 1. Fit the wireless LAN antennae into 2. Position its cable and secure the its cover and position it in the rear hinge. - Page 8 6. Slide the inverter card into its 5. Attach also the status LCD’s main sleeve. Insert and lock its cable. cable to the controller card. 8. Tilt the LCD over so that you can 7. Place the LCD panel next to the connect its cable to the controller rear cover so that you can attach its card.
- Page 9 12. Connect the bridge battery to the motherboard and position it. 11. Place the speakers into the lower cover and position their cable. 14. Attach the cable from DC board and position it. 13. Maneuver the motherboard into the lower cover. 16.
- Page 10 18. Position the heat sink over the 17. Connect the speakers’ cable on the motherboard and secure it. lower right. 19. Position the right and left side 20. Secure the cover. panels. Position the upper cover so that you can attach the click assembly cable.
- Page 11 24. Connect the status LCD cable to 23. Maneuver the LAN cable to the the motherboard. underside of the unit so as to con- nect it to the modem card later. 25. Position the keyboard so that you 26. Tilt down the keyboard so that can attach the cable to the point- you can insert and lock its data ing device.
- Page 12 30. Place the modem cover so that 29. Replace two case screws between you can connect the modem cable the modem card and hard drive and then position the card. bay. 31. Place the hard disk drive into its bay and press to connect its flex 32.