Page 1 TOSHIBA Satellite A210/ Satellite Pro A210 Portable Personal Computer User’s Manual...
Page 2 © 2007 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
Page 3: Safety Instructions
Bluetooth is a registered trademark owned by its proprietor and used by TOSHIBA under license. DVD MovieFactory is trademarks of the Ulead Systems. Inc. Labelflash™ is a trademark of YAMAHA CORPORATION. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Page 4: Fcc Information
resulting excessive current follow can cause extremely high temperatures and may result in damage from burns. ❑ Be sure that noting rests on your AC adapter’s power cable and that the cable is not located where it can be tripped over or stepped on. ❑...
Page 5: Fcc Conditions
USB port, and microphone jack. Changes or modifications made to this equipment, not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’s authority to operate the equipment. FCC conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Page 6 Canadian Department of Communications. Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interfer- ence-Causng Equipment Regulations.
Page 7 Cet appareil numérique de la class B respecte toutes les exgences du Règlement sur le matériel brouileur du Canada. Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN).
Page 8: Type Of Service
Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan region mode. It is illegal to use the modem in Japan with any other selection. Redial Up to two redial attempts can be made.
Page 9: Telephone Company Procedures
When you are notified, you will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corpo- ration or an authorized representative of TOSHIBA Corporation.
Page 10 Instructions for IC CS-03 certified equipment The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protec- tive, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.
Page 11 Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure com- pliance with Austel standards when the country/region selection is set to Austra- lia.
Page 12 ❑ Some parameters required for compliance with Telecom’s PTC Specifica- tions are dependent on the equipment (PC) associated with this modem. The associated equipment shall be set to operate within the following limits for compliance with Telecom Specifications: (a) There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and (b) The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next.
Page 13: General Conditions
❑ The transmit level from this device is set at a fixed level and because of this there may be circumstances where the performance is less than optimal. Before reporting such occurrences as faults, please check the line with a standard Telepermitted telephone, and only report a fault if the phone perfor- mance is impaired.
Page 14 This symbol may not stick depending on the country and region where you purchased. Optical disc drive standards TOSHIBA Satellite A210/Satellite Pro A210 computer is shipped with one of the following drives preinstalled: DVD-ROM, CD-RW/DVD-ROM, or DVD Super Multi (+-R DL) drive.
Page 15: Important Notice
❑ Dispose of used batteries according to the manufacturer’s instructions. Use only the battery pack that came with the computer or an optional battery pack. Use of wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual...
Page 16 Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED: Toshiba Samsung Strage Technology Korea corporation 416, Maetan-3Dong, Yeongtong-Gu Suwon City, Gyeonggi-Do, 443-742, Korea User’s Manual...
Page 17 TEAC DW-224E Location of the required label User’s Manual CERTIFICATION TISH PRODUCT COMPLIES WITH DHHS RULES21CFR CHAPTER 1, SUBCHAPTER J APPLI- CABLE DATE OF MANUFACTURE MANUFACTURED: TEAC CORPORATION 3-7-3 NAKA-CHO, MUSASHINO-SHI, TOKYO, JAPAN xvii...
Page 18 ❑ To prevent direct exposure to the laser beam, do not try to open the enclosure. Toshiba TS-L802A Location of the required label xviii PRODUCT IS CERTIFIED BY THE...
Page 19 Toshiba SD-L902A Location of the required label User’s Manual PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPAL WITH DHHS RULES 21 CFR CHAPTER1, SUBCHAPTER J. MANUFACTURED: Manufactured by TOSHIBA CORPORATION 1-1, SHIBAURA 1-CHOME, MINATO- KU, TOKYO 105-8001, JAPAN...
Page 20 DVD Super Multi (+-R DL) drive safety instructions ❑ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an autho- rized service location.
Page 21 TEAC DV-W28E Location of the required label HLDS GSA-T20N Location of the required label User’s Manual CERTIFICATION TISH PRODUCT COMPLIES WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J APPLICABLE DATE OF MANUFAC- TURE MANUFACTURED: TEAC CORPORATION 3-7-3 NAKA-CHO, MUSASHINO-SHI, TOKYO, JAPAN COMPLIES WITHFDA RADIATION PERFORMANCE STANDARDS, 21...
Page 22 Pioneer DVR-K17T Location of the required label Toshiba Samsung TS-L632D Location of the required label xxii COMPLIES WITHFDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. MANUFACTURED: Manufactured by PIONEER CORPORATION 4-1. Meguro 1-chome, Meguro-ku TOKYO 153-8654, JAPAN PRODUCT IS CERTIFIED BY THE...
Page 23 CLASS 1 LASTER PRODUCT LASERSCHUTZKLASSE 1 PRODUKT TO EN 60825 ADVERSEL: USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAF-BRYDER ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING User’s Manual CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.”...
Page 24 OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUST- MENTS OR PERFORMANCE OF PROCE- DURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Page 25: Table Of Contents
Mobile phone ... xxxviii Instruction Manual for safety and Comfort ... xxxviii Chapter 1 Introduction Equipment checklist ...1-1 Hardware ...1-1 Software...1-2 Features ...1-3 Processor...1-3 Memory...1-3 Disks ...1-4 Special Features ...1-11 TOSHIBA Value Added Package ...1-13 Utilities and Application ...1-14 User’s Manual...
Page 26 Options ...1-17 Chapter 2 The Grand Tour Front with the display closed ...2-1 Left side ...2-3 Right side...2-6 Back side ...2-7 Underside ...2-8 Front with the display open ...2-9 AV Button...2-11 System indicators ...2-12 Optical disc drive ...2-14 About the HD DVD...2-14 Region codes for DVD drives and media...2-15 Writable discs ...2-16 CD-RW/DVD-ROM drive ...2-18...
Page 27 Using optical disc drives...4-12 Loading discs...4-13 Removing discs ...4-15 AV Button function ...4-16 Using TOSHIBA HD DVD PLAYER to enjoy HD DVDs 4-17 HD DVD Playback Restrictions...4-17 Notes on use...4-17 Notes on playing HD DVD Video discs...4-18 TOSHIBA HD DVD PLAYER ...4-20 Using TOSHIBA HD DVD PLAYER ...4-20...
Page 28 Writing CD/DVD/HD DVDs on HD DVD-R drives...4-35 When writing or rewriting ...4-39 TOSHIBA Disc Creator ...4-40 Data Verification ...4-42 Video...4-42 When using Ulead DVD MovieFactory® for TOSHIBA:...4- Media care ...4-46 CD/DVD/HD DVD ...4-46 Using the software ...4-48 Using the microphone ...4-49 Modem ...4-50...
Page 29 Moving the computer...4-58 Heat dispersal ...4-59 Chapter 5 The Keyboard Typewriter keys ...5-1 F1 ... F12 function keys ...5-2 Soft keys: FN key combinations...5-2 Emulating keys on enhanced keyboard...5-2 Hot keys...5-3 FN Sticky key...5-6 Windows special keys ...5-7 Keypad overlay ...5-7 Turning on the overlays ...5-7 Arrow mode ...5-7 Numeric mode ...5-8...
Page 30 Replacing the battery pack ...6-14 Removing the battery pack ...6-14 Installing the battery pack ...6-16 Starting the computer by password...6-16 Power-up modes...6-17 Windows utilities ...6-17 Hot keys...6-17 Panel power on/off...6-18 System Auto Off...6-18 Chapter 7 HW Setup and Passwords HW Setup ...7-1 Accessing HW Setup ...7-1 HW Setup window ...7-1 Chapter 8 Optional Devices...
Page 31 Precautions...8-14 Connecting...8-15 Disconnecting ...8-16 Security lock ...8-16 Chapter 9 Troubleshooting Problem solving process ...9-1 Preliminary checklist ...9-1 Analyzing the problem ...9-2 Hardware and system checklist ...9-3 System start-up...9-3 Self test...9-4 Power...9-4 Password ...9-7 Keyboard ...9-7 LCD panel...9-8 Hard disk drive...9-8 CD-RW/DVD-ROM drive ...9-9 HD DVD ROM drive...9-10 HD DVD-R drive ...9-11...
Page 32 Wireless LAN ...9-24 Bluetooth...9-25 i.LINK (IEEE1394) ...9-25 Recovery Discs...9-26 TOSHIBA support ...9-27 Before you call ...9-27 Chapter 10 Disclaimers CPU ...10-1 Memory (Main System)...10-2 Battery Life ...10-2 HDD Drive Capacity ...10-3 LCD...10-3 Graphics Processor Unit ("GPU") ...10-3 Wireless LAN ...10-4 Non-applicable Icons ...10-4...
Page 33: Manual Contents
A210 computer. This powerful, lightweight notebook computer is designed to provide years of reliable, high-performance computing. This manual tells how to set up and begin using your Satellite A210/Satellite Pro A210 computer. It also provides detailed information on configuring your com- puter, basic operations and care, using optional devices and troubleshooting.
Page 34: Conventions
Chapter 10, Disclaimers, states the Disclaimer(s) information applicable to TOSHIBA computer. The Appendixes provide technical information about your computer. Glossary defines general computer terminology and includes a list of acro- nyms used in the text.
Page 35: Key Operation
Key operation Some operations require you to simultaneously use two or more keys. We iden- tify such operations by the key top symbols separated by a plus sign (+). For example, CTRL + C means you must hold down CTRL and at the same time press C.
Page 36 Preface xxxvi User’s Manual...
Page 37: General Precautions
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and with- stand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
Page 38: Heat Injury
General Precautions Heat injury ❑ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the com- puter for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer low-heat injury.
Page 39: Chapter 1 Introduction
Carefully unpack your computer. Save the box and packing materials for future use. Hardware Check to make sure you have all the following items: ❑ Satellite A210/Satellite Pro A210 Portable Personal Computer ❑ Universal AC adaptor and power cord ❑ Modular cable (Provided with some models) User’s Manual...
Page 40: Software
• Sound Driver for Windows • TOSHIBA DVD Player (Is pre-installed with CD-RW/DVD-ROM drive model or DVD Super Multi drive model) • TOSHIBA HD DVD Player (Is pre-installed with HD DVD-ROM drive model or HD DVD-R drive model) • LAN Drivers •...
Page 41: Features
◆ Documentation: • User Information Guide ® • Microsoft Windows Vista™ manual package (provided with some mod- els) • Instruction Manual for Safety & Comfort • End User License Agreement Features This computer incorporates the following features and benefits: Processor Built-in Please visit your region’s website for the configuration details of the model that you have purchased.
Page 42: Disks
Introduction Disks Hard disk drive The computer has an integrated, 2 1/2" hard disk drive (HDD) for nonvolatile storage of data and software. It comes in the following sizes. 60 GB 80 GB 100 GB 120 GB 160 GB 200 GB 250 GB 300 GB Disclaimer (Hard disk drive capacity)
Page 43 DVD Super Multi Some models are equipped with a full-size DVD Super (+-R DL) drive Multi (+- R DL) drive module that lets you record data to rewritable CD/DVDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor.
Page 44 Introduction HD DVD ROM Some models are equipped with a full-size HD DVD- drive ROM drive module that lets you run CD's or DVD's without using an adaptor. The drive reads DVD-ROM's at a maximum 8x speed and CD-ROM's at a maximum 24x speed, and HD DVD's at a maximum 1x speed and writes CD-R's at up to 16x speed, CD-RW's at up to 10x speed, DVD-R's and DVD+R's at up to 4x speed, DVD-...
Page 45 HD DVD-R drive Some models are equipped with a full-size HD DVD-R drive module that lets you run CD's or DVD's without using an adaptor. The drive reads DVD-ROM's at a maximum 8x speed and CD-ROM's at a maximum 24x speed, and HD DVD's at a maximum 1x speed and writes CD-R's at up to 16x speed, CD-RW's at up to 4x speed, DVD-R's and DVD+R's at up to 4x speed, DVD-...
Page 46: Pointing Device
Introduction Pointing Device Built-in A Touch Pad/Dual Mode Pad and control buttons in the palm rest enable control of the on-screen pointer. Power Battery pack The computer is powered by one rechargeable lithium- ion battery pack. RTC battery The internal RTC battery backs up the Real Time Clock (RTC) and calendar.
Page 47 Slots Multiple Digital This slot lets you easily transfer data from devices, such Media Card as digital cameras and Personal Digital Assistants, that use flash memory (SD/SDHC/MS/MS Pro/MMC/xD memory cards). (Provided with some models) Express Card Express Card slot allows you to install a Express Card™/34 or Express Card™/54 to expand functional- ity.
Page 48 Operating System Windows Vista™ is available. Refer to the preinstalled software section at the front of this chapter. TOSHIBA Utilities A number of utilities and drivers are preinstalled to make your computer more convenient to use. Refer to the Utilities section in this chapter.
Page 49: Special Features
Special Features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hot keys Key combinations let you quickly modify the system configuration directly from the keyboard without run- ning a system configuration program.
Page 50 This feature turns power to the computer off when the display panel is closed and turns it back on when the panel is opened. You can specify the setting in the When I close the lid item of the Setup Action tab in TOSHIBA Power Saver. Low battery auto-...
Page 51: Toshiba Value Added Package
TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA TOSHIBA Power Saver provides you with the feature Power Saver of more various power supply managements. TOSHIBA This utility controls the following computer button Button Support functions.
Page 52: Utilities And Application
TOSHIBA Assist TOSHIBA Assist is a graphical user interface that pro- vides easy access to help and services. HW Setup To start the utility, click the Windows Start button, point to All Programs, click TOSHIBA, click Utilities, and select HWSetup icon.
Page 53 TOSHIBA TOSHIBA DVD-RAM Utility has the function of Phys- DVD-RAM Utility ical Format and Write-Protect to DVD-RAM. This utility is contained the setup module of TOSHIBA Disc Creator. You can boot TOSHIBA DVD-RAM Utility from the menu bar as follows.
Page 54 Mobility Cen- ter. ❑ Lock Computer: This can be used to lock your com- ❑ TOSHIBA Assist: This can be used to open 1-16 homepage through IE (Internet Explorer). third party access to them prevented.
Page 55: Options
An additional battery pack 6 cells Type (PA3534U- 1BRS/ PA3534U-1BAS) and 9 cells Type (PA3535U- 1BRS/ PA3535U-1BAS) can be purchased from your TOSHIBA dealer. The battery pack is identical to the one that came with your computer. Use it as a spare or replacement.
Page 56 Introduction 1-18 User’s Manual...
Page 57: Chapter 2 The Grand Tour
The Grand Tour This chapter identifies the various components of your computer. Become famil- iar with each component before you operate the computer. Front with the display closed Figure 2-1 shows the computer’s front with its display panel in the closed posi- tion.
Page 58 The Grand Tour Use this dial to adjust the volume of the system speaker Volume control and headphones. A standard 3.5 mm mini microphone jack enables con- Microphone jack nection of a monaural microphone or other device for audio input. A standard 3.5 mm mini headphone jack enables con- Headphone jack nection of a stereo headphone (16 ohm minimum) or...
Page 59: Left Side
Left side Figure 2-2 shows the computer’s left side. AN VENT XTERNAL MONITOR PORT *Depending on the model you purchased Figure 2-2 The left side of the computer This 15-pin port lets you connect an external monitor. External monitor port Provides air flow for the fan.
Page 60 The Grand Tour Plug a 4-pin S-Video connector into this jack. Video-out jack This jack lets you connect to a LAN. The adaptor has LAN jack built-in support for Ethernet LAN (10 Mbit/s, 10BASE- T) or Fast Ethernet LAN (100 Mbit/s, 100BASE-TX). The LAN has two indicators.
Page 61 The two Universal Serial Bus (USB) ports comply with Universal Serial USB Serial 2.0 standards, which enables data transfer Bus Ports speeds 40 times faster than the USB 1.1 standards. (The ports also support USB 1.1) Keep foreign objects out of the USB connectors. A pin or similar object can damage the computer’s circuitry.
Page 62: Right Side
The Grand Tour Right side Figure 2-3 shows the computer’s right side. ODEM JACK USB P ORTS *The availability of Modem Jack is depending on the model you purchased. Figure 2-3 The right side of the computer The two Universal Serial Bus (USB) ports comply with Universal Serial USB Serial 2.0 standards, which enables data transfer Bus Ports...
Page 63: Back Side
A security cable attaches to this slot. The optional secu- Security lock slot rity cable anchors your computer to a desk or other large object to deter theft. The AC adaptor connects to this socket. Use only the DC IN 19V model of AC adaptor that comes with the computer.
Page 64: Underside
The Batteries section in Chap- ter 6, access the battery pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time. Slide this latch to release the battery pack.
Page 65: Front With The Display Open
Front with the display open Figure 2-6 shows the front of the computer with the display open. To open the display, slide the display latch on the front of the computer and lift the display up. Position the display at a comfortable viewing angle. AMERA AV B UTTON...
Page 66 The Grand Tour The speaker emits sound generated by your software as Stereo Speaker well as audio alarms, such as low battery condition, gen- erated by the system. Just by swiping the finger against the fingerprint sensor, Fingerprint the following functions will be enabled (Provided with Sensor some models): ❑...
Page 67: Av Button
AV Button Six buttons are provided with some models. Available for use: Internet, CD/DVD, Play/Pause, Stop, Previous, Next. These buttons allow you to manage Audio/Video, run applications and access utilities. Refer to the AV button function section in Chapter 4, Press this button to launch an Internet browser.
Page 68: System Indicators
The Grand Tour System indicators Figure 2-7 shows the system indicators, which light when various computer operations are in progress. Figure 2-7 System indicators Power source/system indicators The DC IN indicator glows blue when DC power is sup- DC IN plied from the AC power adaptor.
Page 69: Keyboard Indicators
Keyboard indicators When the CAPS LOCK indicator glows the keyboard is in all-caps mode. Figure 2-8 CAPS LOCK indicator This indicator glows green when the alphabet keys are CAPS LOCK locked in uppercase. The figures below show the positions of the keypad overlay indicators and the CAPS LOCK indicator.
Page 70: Optical Disc Drive
The Grand Tour Optical disc drive CD-RW/DVD-ROM drive, DVD Super Multi (+-R DL) drive, HD DVD-ROM drive or a HD DVD-R drive. An ATAPI interface controller is used for CD/DVD/ HD DVD-ROM operation. When the computer is accessing a CD/DVD/HD DVD, an indicator on the drive glows.
Page 71: Region Codes For Dvd Drives And Media
dard. This device does not support advanced features of the HD DVD Video standard as defined by the DVD Forum, including picture-in-picture and network dowload features. Screen movement may not be smooth, and per- formance may be lowered with some HD DVD content. ❑...
Page 72: Writable Discs
Writable discs This section describes the types of writable CD/DVD/HD DVD discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, ◆ CD-R discs can be written only once. The recorded data cannot be erased or changed.
Page 73 HD DVDs ❑ Like CD and DVD, HD DVD is divided into the read-only and recordable- formats listedbelow. ❑ Some media cannot be used with this product. Be sure to thoroughly read section "HD DVD-ROM drive" or "HD DVD-R drive" of this before using this product.
Page 74: Cd-Rw/Dvd-Rom Drive
The Grand Tour Formats Some types and formats of DVD-R DL and DVD+R DL discs may be unreadable. • DVD-ROM • DVD-R • DVD-R DL • DVD-RW • DVD+R • DVD+R DL • DVD+RW • DVD-RAM • DVD-Video • CD-R •...
Page 75: Dvd Super Multi (+-R Dl) Drive
DVD Super Multi (+-R DL) drive The full-size DVD Super Multi drive module lets you record data to s as rewrit- able CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
Page 76: Hd Dvd Rom Drive
The Grand Tour HD DVD ROM drive The full-size HD DVD ROM drive module lets you record data to s as rewritable CDs as well as run either 12 cm (4.72") HD DVD,12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
Page 77: Hd Dvd-R Drive
HD DVD-R drive The full-size HD DVD-R drive module lets you record data to s as rewritable CDs as well as run either 12 cm (4.72") HD DVD,12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
Page 78: Remote Controller
The Grand Tour Remote Controller Your computer includes a Remote Controller which enables you to perform some functions of your computer from a distant location. The following figure shows the buttons on the Remote Controller. Your can use your Remote Controller with Media Center to play CDs, DVDs and videos, to view pictures and to watch and record television programs.
Page 79 Refer to the Using the Remote Controller section in this chapter for information on how to use the Remote Controller as well as how to install and remove its bat- teries. ECORD EWIND RROWS OLUME OLUME UIDE ECORDED LEAR Figure 2-10 User’s Manual AUSE Remote Controller...
Page 80 The Grand Tour Starts or terminates the operating system.This button Power functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of your computer. To change the setting, click Start, select Control panel → System and Main- tenance →...
Page 81 The Grand Tour Increases the volume while viewing DVD's or replaying Volume + CD's. Decreases the volume while viewing DVD's or replay- Volume - ing CD's. Opens Media Center to the main window. Start No function. Channel/Page up (+) and down (-) Turns your computer sound off.
Page 82: Using The Remote Controller
The Grand Tour Using the Remote Controller This computer includes a remote control unit, which allows you to control some of your computer's functions from a distant location. ❑ The Remote Controller is designed specifically for this com- puter. ❑ Some application programs may not support remote control functions.
Page 83: Installing/Removing Batteries
*The appearance of the provided Remote Controller may vary from model to model, and it is not provided with some model. Even if within the effective scope as described above, the remote control may malfunction or not work correctly in the following cases.
Page 84: Installing The Batteries
The Grand Tour Observe the following precautions when using the battery of the Remote Controller. ❑ Do not use batteries other than those specified. ❑ Ensure that you insert the batteries with their polarities cor- rectly aligned (+ or -). ❑...
Page 85 ATTERY OVER Figure 2-12 Opening the battery cover 2. Insert the batteries in place. Be sure to place the batteries with their polarities (+ and -) in the correct position. ATTERIES Figure 2-13 Inserting the batteries 3. Close the battery cover. Close the cover securely until it clicks ATTERY OVER...
Page 86: Replacing The Batteries
The Grand Tour Replacing the batteries When the batteries in the Remote Controller reach the end of their life, the Remote Controller may not operate correctly or work only within a short dis- tance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.
Page 87: Ac Adaptor
Figure 2-17 The AC adaptor (3-pin plug) ❑ Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. ❑ Please use only the AC adaptor supplied with the computer or an AC adaptor certified by TOSHIBA.
Page 88 The Grand Tour 2-32 User’s Manual...
Page 89: Chapter 3 Getting Started
Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.
Page 90: Connecting The Ac Adaptor
Chapter 6, Use of the wrong adaptor could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. 1. Connect the power cord to the AC adaptor.
Page 91: Opening The Display
3. Plug the power cord into a live wall outlet. The Battery and DC IN indicator on the front of the computer should glow. Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1.
Page 92: Starting Up For The First Time
Getting Started OWER UTTON Figure 3-4 Turning on the power Starting up for the first time When you first turn on the power, the computer’s initial screen is the Microsoft Windows Vista™ Startup Screen Logo. Follow the on-screen directions. Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Sleep mode.
Page 93: Hibernation Mode
For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places: the Hibernate tab in Power Options and Setup Action tab in TOSHIBA Power Saver. Otherwise, the computer will shut down in Sleep mode. If battery power becomes depleted, data saved in Sleep mode will be lost.
Page 94: Starting Hibernation
Getting Started Starting Hibernation To enter Hibernation mode, follow the steps below. Windows Vista™ 1. Click Windows Start button. 2. Point to 3. Select Hibernate. Automatic Hibernation The computer will enter Hibernate mode automatically when you press the power button or close the lid. First, however, make the appropriate settings according to the steps below.
Page 95: Sleep Mode
Sleep mode In sleep mode the power remains on, but the CPU and all other devices are in sleep mode. ❑ Before entering Sleep mode, be sure to save your data. ❑ Do not install or remove a memory module while the com- puter is in sleep mode.
Page 96: Restarting The Computer
Getting Started When you turn the power back on, you can continue where you left when you shut down the computer. ❑ When the computer is shut down in sleep mode, the power indicator glows amber. ❑ If you are operating the computer on battery power, you can lengthen the operating time by shutting down in hibernation mode.
Page 97: System Recovery Options
System Recovery Options About 1.5GB hidden partition is allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the sys- tem in the event of a problem. System Recovery Options The System Recovery Options feature is installed on the hard disk when shipped from the factory.
Page 98: Create Optical Recovery Discs
Getting Started Create Optical Recovery Discs For HDD Recovery model A recovery image of your computer is stored on the hard disk. You may use this image to create CD or DVD recovery discs using the following steps: 1. Select either blank CDs or DVDs media. 2.
Page 99: Restoring The Preinstalled Software From Your Creating Recovery Media
Press the F9 key to set to default settings, and select the [Yes]. c. Press the F10 key to save the changes, and select the [Yes]. d. When the "In Touch with Tomorrow TOSHIBA" prompt appears, press the F12 key to display the Boot menu.
Page 100 Getting Started 3. Use the up or down cursor key to select CD/DVD in the display menu. For details, refer to the Boot Priority section in Chapter 7, words. 4. A menu appears. Follow the on-screen instructions. When drivers Utilities are installed, you can setup the respective drivers and utilities from the following folder.
Page 101: Chapter 4 Operating Basics
Operating Basics This chapter gives information on basic operations including using the Touch Pad/Dual Mode Pad, the fingerprint sensor, optical disc drives, the web camera, the microphone, the internal modem, wireless communication and LAN. It also provides tips on caring for your computer, diskettes and CD/DVDs. Using the Touch Pad/Dual Mode Pad To use the Touch Pad/Dual Mode Pad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.
Page 102: Dual Mode Pad Button Function
Operating Basics Dual Mode Pad Button function (Dual Mode Pad is provided with some models) ONFIG UTTON PPLICATION Figure 4-2 Dual Mode Pad Button To switch between Cursor Mode and Button Mode. When Switch button you switch to Button Mode, the pad blinks blue. Increases or decreases the volume of speaker and head- phone.
Page 103: Using The Fingerprint Sensor
Windows Photo Gallery gives you many tools for your digi- Windows Photo tal photos and videos.You can organize, find, and view your Gallery photos and videos, as well as edit, print, and share them from within Windows Photo Gallery. It also makes it easy to transfer your photos from your camera to your computer, using a simple import process Three application buttons have default setting.
Page 104: Points To Note About The Fingerprint Sensor
Operating Basics Points to note about the Fingerprint Sensor Failure to follow these guidelines might result in (1) damage to the sensor or cause sensor failure, (2) finger recognition problems, or lower finger recognition success rate. ❑ Do not scratch or poke the sensor with your nails or any hard or sharp objects.
Page 105: How To Delete The Fingerprint Data
❑ A warning message will be displayed when recognition is abnormal or rec- ognition is not successful within a fixed duration. ❑ The recognition success rate may differ from user to user. ❑ Toshiba does not guarantee that this fingerprint recognition technology will be error-free. User’s Manual...
Page 106: Points To Note About The Fingerprint Utility
Operating Basics ❑ Toshiba does not guarantee that the fingerprint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times.Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 107 1. Click Start, Point to All Programs, point to Protector Suite QL and click User Enrollment. You can also start User Enrollment Wizard using the following method. ❑ Click the icon in the Task Bar. ❑ Swipe your finger across the Fingerprint Sensor. 2.
Page 108: Windows Logon Via Fingerprint Authentication
Operating Basics Windows Logon via Fingerprint Authentication In place of the usual Windows logon by ID and password, fingerprint authentica- tion also allows logon to Windows. This is useful especially when many users are using the PCs, as user selection can be skipped.
Page 109: Fingerprint System Boot Authentication
❑ It is necessary to register the User Password before using the Fingerprint Power-on Security and its extended function, the Fingerprint Single Sign-On Feature. Please use TOSHIBA HW Setup to register the User Password. ❑ If you fail fingerprint authentication more than five times, you must enter the User Password or Supervisor Password manually to start the computer.
Page 110: Fingerprint Single Sign-On Feature
It is necessary to register the User Password and Windows Logon password before using the Fingerprint Power-on Security and this Fingerprint Single Sign On Feature. Please use TOSHIBA HW Setup to register your User Password. If Windows Logon is not the default for your system, see Manual to register your Windows Logon password.
Page 111: How To Swipe The Finger
TOSHIBA does not guarantee that the Finger- print utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the finger- print software or utility.
Page 112: Using Optical Disc Drives
❑ Use the TOSHIBA DVD Video Player application to view DVD-Video discs.(CD-RW/DVD-ROM drive model or DVD Super Multi drive model) ❑ Use the TOSHIBA HD DVD Video Player application to view DVD-Video discs or HD DVD-Video discs.(HD DVD-ROM model or HD DVD-R drive model) If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on CD- RW/DVD-ROM drive section for precautions on writing to CDs.
Page 113: Loading Discs
Loading discs To load CD/DVDs, follow the steps below and refer to figures 4-3 to 4-7. 1. a. When the power is on, press the eject button to open the drawer slightly. Figure 4-3 Pressing the eject button b. Pressing the eject button will not open the drawer when the drive’s power is off.
Page 114 Operating Basics 2. Grasp the drawer gently and pull until it is fully opened. Figure 4-5 Pulling the drawer open 3. Lay the CD/DVD/HD DVD, label side up, in the drawer. Figure 4-6 Inserting a CD/DVD/HD DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD/HD DVD tray.
Page 115: Removing Discs
4. Press gently at the center of the CD/DVD/HD DVD until you feel it click into place. The CD/DVD/HD DVD should lie below the top of the spindle, flush with the spindle base. 5. Push the center of the drawer to close it. Press gently until it locks into place.
Page 116: Av Button Function
Operating Basics 2. The CD/DVD/HD DVD extends slightly over the sides of the drawer so you can grasp it. Hold the CD/DVD/HD DVD gently and lift it out. Figure 4-8 Removing a CD-RW/DVD/HD DVD-ROM 3. Push the center of the drawer to close it. Press gently until it locks into place.
Page 117: Using Toshiba Hd Dvd Player To Enjoy Hd Dvds
HD DVD Playback Restrictions HD DVD-ROM drive and HD DVD-R drive model allow users to enjoy the strong visuals of HD DVDVideo. "TOSHIBA HD DVD PLAYER" software is provided for playback of HD DVD- Video. Notes on use HD DVD Playback ❑...
Page 118: Notes On Playing Hd Dvd Video Discs
HD DVD Video playback. ❑ HD DVD Video playback may take several moments to begin. ❑ When playing an HD DVD (Twin format disc), run it from the "TOSHIBA HD DVD Launcher Menu". Only the HD DVD Layer of an HD DVD (Twin format disc) can be played in the "TOSHIBA HD DVD PLAYER".
Page 119 PLAYER" is running. Display Devices & Audio ❑ "TOSHIBA HD DVD PLAYER" will only run when "Colors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click Start → Con- trol Panel →...
Page 120: Toshiba Hd Dvd Player
❑ "TOSHIBA HD DVD PLAYER" software is supported for playback of HD DVD Video, DVD-Video and DVD-VR. ❑ The "TOSHIBA HD DVD PLAYER" does not have a parental control func- tion. ❑ In order to protect copyrights, the Windows Print Screen function is disabled when "TOSHIBA HD DVD PLAYER"...
Page 121: Operating Toshiba Hd Dvd Player
If this occurs, select Play HD DVD movie or Run the HD DVD Launcher, then click OK to launch the TOSHIBA HD DVD PLAYER. Figure 4-10 Application selection screen 2. Touch the CD/DVD panel on the Front operation panel. Or select Start →...
Page 122 Menu or Menu buttons, touch pad and mouse menu operations may not be able to be used. ISPLAY TOSHIBA HD DVD PLAYER C Figure 4-11 TOSHIBA HD DVD PLAYER windows Displays video. Double click on the Display Area to Display Area toggle full screen display mode on and off. Click the Display Area to display the Control window when it isn't displayed.
Page 123: Open Toshiba Hd Dvd Player Help
Open TOSHIBA HD DVD PLAYER HELP TOSHIBA HD DVD PLAYER features and instructions are also explained in detail in "TOSHIBA HD DVD PLAYER Help". Use the following procedure to open "TOSHIBA HD DVD PLAYER Help".
Page 124 DVD-VR only. REVIOUS JECT HAPTER HAPTER EWIND Figure 4-13 TOSHIBA HD DVD PLAYER Control window (2) Opens the disc tray. Eject Jumps to the previous chapter. Previous Chapter Jumps to the next chapter. Next Chapter One-touch...
Page 125 NGLE OUND ITLE UBTITLE EPEAT EARCH Figure 4-14 TOSHIBA HD DVD PLAYER Control window (3) Switches between available subtitles. Subtitle Sound Switches between audio tracks for titles which have more than 1 audio track. Switches between angles for multi-angle compatible Angle titles.
Page 126: Using The Computer In Place Of An Hd Dvd Player
Using the Computer in place of an HD DVD Player Videos played using "TOSHIBA HD DVD PLAYER" included with the com- puter can be displayed on a television equipped with an HDMI input port. HD DVD-Video can only be displayed on the computer's display panel or on a television connected to the HDMI out port.
Page 127: Connecting To The Computer
Connecting to the Computer Turn off the television and computer before connecting. 1. Insert the HDMI cable plug into the HDMI out port on the com- puter. Figure 4-15 Connecting the HDMI out port 2. Insert the remaining HDMI cable plug into the HDMI input port on the television.
Page 128: Display Compatibility
The following is an HD DVD-Video display compatibility list. O: The display of TOSHIBA HD DVD PLAYER is possible. X: The display of TOSHIBA HD DVD PLAYER is impossible.
Page 129: Writing Cds On Cd-Rw/Dvd-Rom Drive
MITSUBISHI KAGAKU MEDIA CO., LTD Ricoh Co., Ltd. TOSHIBA has confirmed the operation of CD-R and CD-RW media of the man- ufacturers above. Operation of other media cannot be guaranteed. ◆ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.
Page 130: When Writing Or Rewriting
◆ Write from the computer’s HDD to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ◆ Writing with software other than TOSHIBA Disc Creator has not been con- firmed. Therefore, operation with other software cannot be guaranteed.
Page 131: Disclaimer (Cd-Rw/Dvd-Rom Drive)
(+-R DL) drive You can use the DVD Super Multi (+-R DL ) drive to write data to either CD-R/ RW or DVD-R/-RW/+R/+RW/-RAM/+R DL/-R DL discs. The following appli- cations for writing are supplied: TOSHIBA Disc Creator. Ulead DVD Movie ® Factory for TOSHIBA, which is a product of Ulead Systems, Inc.
Page 132 Operating Basics ◆ However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. CD-R: TAIYO YUDEN CO., LTD. MITSUBISHI KAGAKU MEDIA CO., LTD Ricoh Co., Ltd.
Page 133 ◆ The actual number of rewrites to CD-RW, DVD-RW, DVD+RW or DVD- RAM is affected by the quality of the disc and the way it is used. ◆ There are two types of DVD-R discs: authoring and general use discs. Do not use authoring discs.
Page 134: When Writing Or Rewriting
◆ Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. ◆ Writing with software other than TOSHIBA Disc Creator is not recom- mended.
Page 135: Disclaimer (Dvd Super Multi (+-R Dl) Drive)
Disclaimer (DVD Super Multi (+-R DL) drive) TOSHIBA does not bear responsibility for the following: ◆ Damage to any CD-R/RW or DVD-R/-R DL/-RW/+R/+R DL/+RW/DVD- RAM disc that may be caused by writing or rewriting with this product. ◆ Any change or loss of the recorded contents of CD-R/RW or DVD-R/-R DL/...
Page 136: Important Message
❑ CD-R/RW media cannot be accessed using the Create CD/ DVD option in Media Center. ❑ To write data to CD-RI-RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. When writing information to media using an optical drive, you should always ensure that you connect the AC adaptor to a live power socket.
Page 137 RW, DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM or HD DVD-R media, however, it must be noted that disc quality can affect write or rewrite success rates. Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc.
Page 138 Operating Basics ❑ This drive cannot use discs that allow writing faster than 8x speed (DVD-R and DVD+R media), 4x speed (DVD-RW and DVD+RW media), 5x speed (DVD-RAM media), 2x speed (DVD-R (Dual Layer) media) and 2.4x speed (DVD+R (Dou- ble Layer media).
Page 139: When Writing Or Rewriting
DVD/HD DVD - do not try to write from shared devices such as a server or any other network device. ◆ Writing with software other than TOSHIBA Disc Creator has not been con- firmed, therefore operation with other software applications cannot be guar- anteed.
Page 140: Toshiba Disc Creator
Player' function to record music to DVD-R, DVD-R (Dual Layer),DVD- RW, DVD+R, DVD+R (Double Layer), DVD+RW or HD DVD-R media. ◆ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video, DVD-ROM or HD DVD-R material that has copyright protection.
Page 141 TOSHIBA Disc Creator. ◆ TOSHIBA Disc Creator cannot record in packet format. ◆ You might not be able to use the 'Disc Backup' function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW or HD DVD-R disc that was made with other software on a different optical media recorder.
Page 142: Data Verification
3. Select File Open or Full Compare mode. 4. Click the OK button. How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information. Video You can record video using Ulead DVD MovieFactory...
Page 143: How To Learn More About Ulead Dvd Moviefactory
How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV- Camcorder: 1. Click Start → All Programs → DVD MovieFactory for TOSHIBA → Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory.
Page 144: Important Information For Use
Operating Basics Important information for use Note the following limitations when you write video DVD: 1. Editing digital video. ❑ Log in with Administrator rights to use DVD MovieFactory. ❑ Make sure that your computer is running on AC power when using DVD MovieFactory.
Page 145 • Install, remove or connect external devices, including the following: Express Card, SD card, USB device, external display, i.LINK devices, optical digital devices. ❑ Please verify your disc after recording important data. ❑ DVD-R/+R/-RW disc cannot be written in VR format. ❑...
Page 146: Media Care
Operating Basics Media care This section provides tips on protecting data stored on your CD/DVD/HD DVD. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVD/HD DVD 1.
Page 147 Using the Web Camera(Built-in Web Camera is provided with some mod- els.) This section describes the bundled webcam utility, which can capture still and video images. The web camera will auto-run when Windows starts. 1. A CTIVE 2. W AMERA User’s Manual Figure 4-16 Web Camera Operating Basics...
Page 148: Using The Software
Operating Basics Using the software The web camera software is pre-configured to start when you turn on Windows Vista; if you need to restart it go to Start → Programs → Camera Assistant Software → Camera Assistant Software 1. Capture still images 3.
Page 149: Using The Microphone
Choose from the Options tab to flip, zoom, flicker rate, Properties night mode and backlight compensation; in the Image tab change the colour settings; in the profile tab change the lighting conditions. Choose from the : Options tab to change the tool posi- Settings tion;...
Page 150: Modem
To select a region, follow the steps below. 1. In Windows Vista™, click start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select Utility. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Page 151: Properties Menu
4. Select a region from the region menu or a telephony location from the sub- menu. • When you click a region it becomes the modem’s region selection, and the New Location for telephony will be set automatically. • When you select a telephony location, the corresponding region is auto- matically selected and it becomes the modem’s current region setting.
Page 152: Dialing Properties
Operating Basics Dialing Properties Select this item to display the dialing properties. If you are using the computer in Japan, the Telecommunications Business Law requires that you select Japan region mode. It is illegal to use the modem in Japan with any other selection. Connecting To connect the internal modem cable, follow the steps below.
Page 153: Wireless Communications
◆ 11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g and 802.11n respectively. The IEEE 802.11n specification has not been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n Wireless LAN Adapters are based on the Draft Release, Version 1.0, of the IEEE 802.11n specification.
Page 154: Bluetooth Wireless Technology
TOSHIBA strongly recommends the customer to enable the encryption function. ◆ TOSHIBA is not liable for the eavesdropping of data due to the use of Wire- less LAN and the damage thereof.
Page 155: Wireless Communication Switch
Wireless communication switch You can enable or disable Wireless LAN and Bluetooth functions, with the on/off switch. No transmissions are sent or received when the switch is off. Slide the switch toward the left of the computer to turn it on and toward the right of the computer to turn it off.
Page 156: Lan
Operating Basics The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) or Fast Ethernet LAN (100 megabits per second, 100BASE- TX)(depending on model you purchased). This section describes how to connect/ disconnect to a LAN. Do not install or remove an optional memory module while Wake- up on LAN is enabled.
Page 157: Disconnecting Lan Cable
2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Figure 4-21 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.
Page 158: Cleaning The Computer
Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ◆ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.
Page 159: Heat Dispersal
CPU speed. Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the Cooling Method item of the Basic Setup window in TOSHIBA Power Saver.
Page 160 Operating Basics 4-60 User’s Manual...
Page 161: Chapter 5 The Keyboard
The Keyboard The computer’s keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/105-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s key- board layout your computer is configured with.
Page 162: F1 ... F12 Function Keys
Soft keys: FN key combinations The FN (function) is unique to Toshiba computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
Page 163: Hot Keys
The Keyboard tion in this chapter for more information on how to operate these keys. The power on default for both settings is off. Press FN + F12 (ScrLock) to lock the cursor on a specific line. The power on default is off.
Page 164 The Keyboard Instant security: Pressing FN + F1 to enter “Lock computer” mode. To restore your desktop, you need to log on again. Power Plan: Pressing FN + F2 changes the power settings. Sleep: Pressing FN + F3 switches the system to Sleep mode. Hibernation: Pressing FN + F4 switches the system to Hibernate mode.
Page 165 Brightness Down: Pressing FN + F6 decreases the computer’s display panel brightness in individual steps. Brightness Up: Pressing FN + F7 increases the computer’s display panel brightness in indiviual steps. Wireless: Pressing FN + F8 switches the active wireless devices if the wireless communication switch is switched on.
Page 166: Fn Sticky Key
FN Sticky key You can use the Toshiba Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and they press an “F number” key.
Page 167: Windows Special Keys
The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows: one activates the Start menu and the other has the same function as the secondary mouse button. This key activates the Windows Start menu. This key has the same function as the secondary mouse button.
Page 168: Numeric Mode
The Keyboard Numeric mode To turn on the Numeric mode, press FN + F11. The Numeric mode indicator lights. Now try numeric data entry using the keys in figure 5-1. Press FN + F11 again to turn off the overlay. Figure 5-1 The numeric keypad overlay Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard with-...
Page 169: Temporarily Using Overlay (Overlay Off)
Temporarily using overlay (overlay off) While using the normal keyboard, you can temporarily use the keypad overlay without turning it on: 1. Press and hold down FN. 2. Check the keyboard indicators. Pressing FN turns on the most recently used overlay.
Page 170 The Keyboard 5-10 User’s Manual...
Page 171: Chapter 6 Power And Power-Up Modes
Chapter 6 Power and Power-Up Modes The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
Page 172 DC IN off • Operates • LED: Battery flashes Amber DC IN off Computer goes into Hibernation or shuts down (depending on the Toshiba power Management Utility Setting) • No operation • LED: Battery off DC IN off Power off (no operation) •...
Page 173: Power Indicators
Power indicators The Battery, DC IN and Power indicators on the system indicator panel alert you to the computer’s operating capability and battery charge status. Battery indicator Check the Battery indicator to determine the status of the battery. The following indicator lights indicate the battery status: Flashing amber The battery charge is low.
Page 174: Power Indicator
The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. User’s Manual...
Page 175: Real Time Clock Battery
Check system. Then press [F1] key ..The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.
Page 176: Care And Use Of The Battery Pack
Power and Power-Up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack.
Page 177 Never use the computer again until it has been checked by a TOSHIBA ser- vice provider. It might generate smoke or fire, or the battery pack might rupture.
Page 178 2. Never dispose of battery packs with normal trash. Bring them to your TOSHIBA dealer or to another recycling center to save resources and pre- vent environmental damage. Cover the terminals with electrical tape to pre- vent short-circuits, which could cause the battery pack to ignite or rupture.
Page 179: Charging The Batteries
The Battery indicator glows amber when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Batteries charger to charge the battery pack. Never attempt to charge the battery pack with any other charger.
Page 180: Battery Charging Notice
Power and Power-Up Modes Battery charging notice The battery may not charge right away under the following conditions: ❑ The battery is extremely hot or cold. If the battery is extremely hot, it might not charge at all. Also, to ensure the battery charges to its full capacity, charge the battery at room temperature of 10°...
Page 181: Monitoring Battery Capacity
Monitoring battery capacity Remaining battery power can be monitored in TOSHIBA Power Saver. ❑ Wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. The computer needs this time to check the battery’s remaining capacity and to calculate the remaining operating time, based on the cur- rent power consumption rate and remaining battery capacity.
Page 182: Maximizing Battery Operating Time
❑ How you configure the computer (for example, whether you enable battery- power saving options). The computer provides a battery save mode, which can be set in TOSHIBA Power Saver, to conserve battery power. This mode has the following options: •...
Page 183: Retaining Data With Power Off
Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods: Battery pack (3 cell) Battery pack (6 cell) Battery pack (9 cell) RTC battery Extending battery life To maximize the life of your battery pack: ❑...
Page 184: Replacing The Battery Pack
Power and Power-Up Modes ❑ If you are not going to use the computer for more than eight hours, discon- nect the AC adaptor. ❑ Store spare battery packs in a cool dry place out of direct sunlight. Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one.
Page 185 Figure 6-2 Removing the battery pack 7. Pull the battery pack forward to remove it. For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. User’s Manual Power and Power-Up Modes...
Page 186: Installing The Battery Pack
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Be sure the computer’s power is off and all cables are disconnected. 2. Insert the battery pack.
Page 187: Power-Up Modes
Refer also to the sections Turning on the power and Turning off the power in Chapter 3, Windows utilities You can specify the setting in TOSHIBA Power Saver. Hot keys You can use hot keys FN + F3 to enter Sleep mode and FN + F4 to enter Hiber- nation.
Page 188: Panel Power On/Off
Power and Power-Up Modes Panel power on/off You can set up your computer so that power turns off automatically when you close the display panel. When you open the panel, power turns on in Sleep or Hibernation mode but not in boot mode. If the panel power off function is enabled and use Shut down Windows, do not close the display until the shut down function is completed.
Page 189: Chapter 7 Hw Setup And Passwords
HW Setup and Passwords This chapter explains how to use TOSHIBA HW Setup program to configure your computer and how to set passwords. HW Setup TOSHIBA HW Setup lets you configure settings for Display, CPU, Boot priority, Keyboard, USB, LAN, General and password.
Page 190 HW Setup and Passwords General This window displays the BIOS version and contains two buttons: Default and About. Return all HW Setup values to the factory settings. Default Display the HW Setup version. About Setup This field displays BIOS Version and date. Password User Password This option allows you to set or reset the user password for power on.
Page 191 To delete a user password: 1. Select Not Registered to display the following prompt: Enter Password: 2. Enter the currently registered password. The character string you enter is displayed as a string of asterisks. Enter Password: **** If you click the OK button before entering the password, Registered will appear on the display.
Page 192: Boot Priority
HW Setup and Passwords Dynamic CPU Frequency Mode This option lets you choose from the following settings: Dynamically Switchable Always Low Boot Priority Boot Priority Options This option sets the priority for booting the computer. If there is only 1 HDD, the Boot Priority Options setting will be like the follow- CPU power consumption and clock speed automatic switching function is enabled.
Page 193 If there are only 2 HDDs, the Boot Priority Options setting will be like the fol- lowing. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: Selects the USB diskette drive.
Page 194 HW Setup and Passwords Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in sleep mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in sleep mode. Enables Wake-up on Keyboard.
Page 195: Chapter 8 Optional Devices
Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. The following optional devices are available from your TOSHIBA dealer: Cards/memory ❑ Express Cards ❑ SD, SDHC, MS, MS Pro, MMC, xD memory cards ❑ Memory expansion Power devices ❑...
Page 196: Express Card
Optional Devices Express Card Installing an Express Card The Express Card slot is located on the left side of the computer. You can install one Express Card in the slot. Windows’ hot-install feature lets you install Express Card while the computer’s power is on.
Page 197: Removing An Express Card
Removing an Express Card To remove the Express Card, follow the steps below. 1. In Windows Vista™, open the Safely Remove Hardware icon on the system tray and disable the Express Card. 2. Press the Express Card slightly to make it stretch out. 3.
Page 198: Multiple Digital Media Card Slot
Optional Devices Multiple Digital Media Card Slot Some models are equipped with a Multiple Digital Media Card Slot that can accommodate Secure Digital (SD)/ Secure Digital High Capacity (SDHC)/ Mem- ory Stick (MS)/Memory Stick Pro (MS Pro)/Multi Media Card (MMC)/xD mem- ory cards.
Page 199 2. Press gently to ensure a firm connection. SD/SDHC/ MS/MS P MMC/ CARD Figure 8-3 Inserting the memory card ❑ Keep foreign objects out of the Multiple Digital Media Card Slot. A pin or similar object can damage the computer's cir- cuitry ❑...
Page 200: Removing A Sd/Sdhc/Ms/Ms Pro/Mmc/Xd Card
Optional Devices Removing a SD/SDHC/MS/MS Pro/MMC/xD card To remove the memory card, follow the steps below. 1. In Windows Vista™, open the Safely Remove Hardware icon on the system tray and disable the inserted memory card. 2. Gently press the memory card inside the socket to eject it. 3.
Page 201: Memory Expansion
Memory expansion You can install additional memory in the computer’s memory module to increase the amount of RAM. Only memory modules with the following parts numbers can be installed: 512MB: PA3511U-1M51 1GB: PA3512U-1M1G 2GB: PA3513U-1M2G Installing memory module To install a memory module, make sure the computer is in boot mode then: 1.
Page 202 Optional Devices Figure 8-5 Removing the cover 6. Insert the memory module into the connector on the computer. Press the module carefully and firmly to ensure a solid connection. 7. Push the module down so that it lies flat and is secured by two latches. Do not touch the connectors on the memory module or on the computer.
Page 203: Removing Memory Module
memory is recognized. If it is not recognized, check the module’s connec- tion. Removing memory module To remove the memory module, make sure the computer is in boot mode then: 1. Turn the computer off and remove all cables connected to the computer. ❑...
Page 204: Additional Battery Pack (6 Cell And 9 Cell)
Optional Devices Figure 8-7 Removing the memory module 7. Seat the cover and secure it with one screw. Additional battery pack (6 Cell and 9 Cell) You can increase the portability of the computer with additional battery packs (6 Cell: PA3534U-1BRS/PA3534U-1BAS, 9 Cell: PA3535U-1BRS/PA3535U- 1BAS).
Page 205: External Monitor
External monitor An external analog monitor can be connected to the external monitor port on the computer, Port Replicator. The computer supports VGA and Super VGA video modes. To connect a monitor, follow the steps below. If an external monitor is connected to the computer, do not connect the Port Replicator.
Page 206: Television
Optional Devices Television A television can be connected to the video out port on the computer. To connect a television, follow the steps below. 1. Turn the computer off. 2. Use a video cable (not supplied) to connect the television to the video out port.
Page 207: Hdmi
HDMI A HDMI monitor can be connected to the HDMI out port on the computer. 1080i, 720p, 576p and 480p signal formats can be supported. But actual signal format you can use depends on HDMI monitor. To connect monitor, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors has not been confirmed, some HDMI monitors...
Page 208: I.link (Ieee1394)
There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. 2. Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.
Page 209: Connecting
3. If you are transferring data through an IEEE1394 hub, do not connect or disconnect other devices from the hub during data transfer. There is a likeli- hood that data will be damaged. Connect all devices to the hub before you turn on the computer’s power.
Page 210: Disconnecting
Optional Devices Disconnecting 1. Open the Safety Remove Hardware icon on the Task Bar. 2. Point to i.LINK (IEEE1394) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. Refer also to the documentation that came with your i.LINK device.
Page 211: Chapter 9 Troubleshooting
Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
Page 212: Analyzing The Problem
Troubleshooting ❑ Check that your diskette is correctly inserted and that the diskette’s write protect tab is correctly set. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer. If a problem recurs, the log will help you identify the problem faster.
Page 213: Hardware And System Checklist
Hardware and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals. Basic problems may occur in the following areas: ❑ System start-up ❑ Self test ❑ Power ❑ Password ❑ Keyboard ❑ LCD panel ❑ Hard disk drive ❑...
Page 214: Self Test
When the computer starts up, the self-test will be run automatically, and the fol- lowing will be displayed: In Touch with Tomorrow TOSHIBA This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system.
Page 215 AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN indicator. Refer to Chapter 6, more information. Problem Procedure AC adaptor doesn’t Check the connections. Make sure the cord is power the computer firmly connected to the computer and a power (DC IN indicator does outlet.
Page 216 Troubleshooting Battery If you suspect a problem with the battery, check the DC IN indicator as well as the battery indicator. For information on indicators and battery operation see Chapter 6, Power and Power-Up Problem Procedure Battery doesn’t power The battery may be discharged. Connect the AC the computer adaptor to charge the battery.
Page 217: Password
Problem Procedure Battery doesn’t power If you frequently recharge a partially charged the computer as long battery, the battery might not charge to its full as expected potential. Fully discharge the battery, then try to charge it again. Check the power consumption settings in Power Saver utility.
Page 218: Lcd Panel
Troubleshooting LCD panel Apparent LCD problems may be related to the computer’s setup. Refer to Chap- ter 7, HW Setup and Passwords, for more information. Problem Procedure No display Press hot keys FN + F5 to change the display priority, to make sure it is not set for an external monitor.
Page 219: Cd-Rw/Dvd-Rom Drive
CD-RW/DVD-ROM drive For more information, refer to Chapter 4, Problem Procedure You cannot access a Make sure the drive’s drawer is securely closed. CD/DVD in the drive Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated.
Page 220: Hd Dvd Rom Drive
Troubleshooting HD DVD ROM drive For more information, refer to Chapter 4, Problem Procedure You cannot access a Make sure the drive’s drawer is securely closed. CD/DVD in the drive Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated.
Page 221: Hd Dvd-R Drive
HD DVD-R drive For more information, refer to Chapter 4, Problem Procedure You cannot access a Make sure the drive’s drawer is securely closed. CD/DVD in the drive Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated.
Page 222: Dvd Super Multi (+-R Dl) Drive
Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: Use only media recommended by TOSHIBA Do not use the mouse or keyboard during writ- ing. Use only the software supplied with the com- puter for recording.
Page 223 Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: • Use only media recommended by TOSHIBA • Do not use the mouse or keyboard during • Use only the software supplied with the com- •...
Page 224: Diskette Drive
Troubleshooting Diskette drive Problem Procedure Drive does not There may be a faulty cable connection. Check operate the connection to the computer and to the drive. Some programs run The software or hardware configuration may be correctly but others causing a problem. Make sure the hardware do not configuration matches your software needs.
Page 225: Touch Pad/Dual Mode Pad
Touch Pad/Dual Mode Pad Problem Procedure On-screen pointer The system might be busy. If the pointer is does not respond to shaped as an hourglass, wait for it to resume its Pad operation normal shape and try again to move it. Double-tapping does Try changing the double-click speed setting in not work...
Page 226 Troubleshooting Problem Procedure When the reaction of Adjust the touch Sensitivity. Touch pad/Dual Mode Pad is sensitive to slow If problems persist, contact your dealer. 9-16 1. Open the Control Panel. 2. Click the Printers icon and then the Other Hardware icon.
Page 227: Usb Mouse
USB mouse This section applies only with Windows Vista™ operating systems. Problem Procedure On-screen pointer The system might be busy. If the pointer is does not respond to shaped as an hourglass, wait for it to resume its mouse operation normal shape and try again to move it.
Page 228: Fingerprint Sensor
If problems persist, contact your dealer. Fingerprint Power on Please use TOSHIBA HW Setup to register the Security or Single User Password if it was not registered. Sign On feature cannot be enabled.
Page 229: Express Card
Express Card Refer also to Chapter 8, Optional Problem Procedure Express Card error Reseat the Express Card to make sure it is occurs firmly connected. Make sure the connection between the external device and the card is firm. Check the card’s documentation. If problems persist, contact your dealer.
Page 230: Monitor
Troubleshooting Monitor Refer also to Chapter 8, Optional Problem Procedure Monitor does not turn Make sure that the external monitor’s power switch is on. Confirm that the external monitor’s power cable is plugged into a working power outlet. No display Try adjusting the contrast and brightness con- trols on the external monitor.
Page 231: Sound System
Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure. Check Windows Device Manager. Make sure the sound function is enabled and that settings for I/O address, Interrupt level and DMA are cor- rect for your software and do not conflict with other hardware devices that you may have con- nected to the computer.
Page 232: Usb
Troubleshooting Refer also to your USB device’s documentation. Problem Procedure USB device does not Check for a firm cable connection between the work USB ports on the computer and the USB device. Make sure the USB device drivers are properly installed.
Page 233 Problem Procedure After making a call Make sure the tone or pulse selection in your you can’t hear a ring communications application is set correctly. You can also use the ATD command. Refer to the chapter on AT commands in online help files for Appendix C, Communication is cut The computer will automatically cut off commu-...
Page 234: Sleep/Hibernation
Troubleshooting Sleep/Hibernation Problem Procedure The system will not Is Windows Media Player open? The system enter Sleep/Hiberna- might not enter Sleep/Hibernation, if Windows tion Media Player is either playing a selection or fin- ished playing a selection. Close Windows Media Player before you select Sleep/Hibernation.
Page 235: Bluetooth
Bluetooth For more information on wireless communication, refer to Chapter 4, Basics. Problem Procedure Cannot access Blue- Make sure the computer’s wireless communica- tooth device tion switch is set to on. Make sure the Bluetooth Manager is running and the power to the Bluetooth device is turned Make sure no optional Bluetooth Adpater is installed in the computer.
Page 236: Recovery Discs
Recovery Media" section in this manual. You will be directed to select "Restore Original Factory Image" from the drop-down menu. If you have not created "Recovery Media", please contact TOSHIBA support for assistance. 9-26 User’s Manual...
Page 237: Toshiba Support
TOSHIBA support If you require any additional help using your computer or if you are having prob- lems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating sys- tem, it is important to investigate other sources of assistance first.
Page 238 Troubleshooting Outside of Europe Australia TOSHIBA Australia Pty. Ltd. Information Systems Division 84-92 Talavera Road North Ryde N.S.W. 2113 Sydney Canada TOSHIBA of Canada Ltd. 191 McNabb Street, Markham, Ontario L3R 8H2 China TOSHIBA Personal Computer & Network (Shanghai) Co., Ltd.
Page 239: Chapter 10 Disclaimers
86°F) or > 25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model- please refer to your PC documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details). CPU performance may also vary from specifications due to design configuration.
Page 240: Memory (Main System)
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
Page 241: Hdd Drive Capacity
Disclaimers shipped with your computer, or visit the Toshiba web site at www.pcsup- port.toshiba.com. HDD Drive Capacity 1 Gigabyte (GB) means = 1,000,000,000 bytes using powers of 10. The com- puter operating system, however, reports storage capacity using powers of 2 for...
Page 242: Wireless Lan
Disclaimers Wireless LAN The transmission speed over the wireless LAN and the distance over which wire- less LAN can reach may vary depending on surrounding electromagnetic envi- ronment, obstacles, access point design and configuration, and client design and software/hardware configurations. [54Mbps is the theoretical maximum speed under the IEEE802.11 (a/b/g) stan- dard.] The actual transmission speed will be lower than the theoretical maximum speed.
Page 243: Appendixes
Appendixes Appendix A Specifications... A-1 Appendix B Display Controller and Modes ...B-1 Appendix C V.90/V.92 ... C-1 Appendix D Wireless LAN ... D-1 Appendix E AC Power Cord and Connectors ... E-1 User’s Manual...
Page 244 Appendixes-2 User’s Manual...
Page 245: Physical Dimensions
Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Size With TFT display 362 (w) x 267.8 (d) x 33.5 (front) / 39.3 (rear) millimeters Weight (typical*) < 2.72 kilograms, configured with: 15.4" panel, DVD Combo drive, 3-cell battery, and modem. * Weight will vary depending on whether or not and what kind of options are adopted.
Page 246 Specifications Built-in Modem The ability of this feature is depending on the model you purchased. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications...
Page 247: Display Controller And Modes
Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Super VGA (SVGA) and Extended Graphics Array (XGA) support for the internal LCD and external monitors.
Page 248: Video Modes
Video Modes The computer supports video modes defined in the table below. If your applica- tion offers a selection of mode numbers that do not match the numbers on the table, select a mode based on, resolution, number of colors and refresh rates. CRT Display Resolution 800*600...
Page 249: Appendix C
V.90/V.92 The TOSHIBA internal modem uses V.90 technology. The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Inter- net service provider that supports V.90/V.92. As with any modem, the actual throughput (speed of data transfer) depends on analog telephone line conditions, which can vary considerably.
Page 250 Table Result codes for a V.90 connection Result code CONNECT 32000 EC* CONNECT 36000 EC* CONNECT 40000 EC* CONNECT 44000 EC* CONNECT 48000 EC* CONNECT 52000 EC* CONNECT 56000 EC* CONNECT 28000 EC* CONNECT 29333 EC* CONNECT 30666 EC* CONNECT 33333 EC* CONNECT 34666 EC* CONNECT 37333 EC* CONNECT 38666 EC*...
Page 251 AT Command -V90=* V.90 Dial Line Rate -V90 sets the maximum V.90 downstream that the modem attempts to connect. -V90=0 V.90 disabled -V90=1 V.90 enabled: automatic speed selection - maximum modem speed (default) User’s Manual...
Page 252 User’s Manual...
Page 253: Card Specifications
Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications From Factor ■ Compatibility ■ ■ Network Operat- ■ ing System Media Access ■ Protocol Data Rate ■...
Page 254 Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for informa- tion about the radio regulations that apply in your country/region.
Page 255 When installing Wireless LAN cards, the channel configuration is managed as follows: ◆ For wireless clients that operate in a Wireless LAN infrastructure, the Wire- less LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.
Page 256 Frequency Range Channel ID Factory-set default channels Refer to the sheet Approved Countries/Regions for use for the countries/ regions that in which these channels can be used. These channels are available to A/B/G combo type only. Available Area: US (USA, CANADA) only. 5150-5850 MHz 5640 5660...
Page 257: Ac Power Cord And Connectors
AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various interna- tional AC power outlets and the cord must meet the standards for the country/ region in which it is used. All cords must meet the following specifications: Length: Wire size: Current rating:...
Page 258: United Kingdom
The following illustrations show the plug shapes for the U.S.A. and Canada, the United Kingdom, Australia, Europe and China. United Kingdom UL approved BS approved Australia Europe AS approved Approved by the appropriate agency China Canada CCC approved CSA approved User’s Manual...
Page 259: Glossary
Glossary The terms in this glossary cover the topics discussed in this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CMOS: complementary metal-oxide...
Page 260 SCSI (Abbreviations continued) SCSI: small computer system inter- face SIO: serial input/output SO-DIMM: small-outline dual in-line memory module SVGA: super video graphics adapter SDRAM: synchronized dynamic ran- dom access memory TFT: thin-film transistor UART: universal asynchronous receiver/transmitter USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array...
Page 261 AUTOEXEC.BAT: A batch file that executes a series of MS-DOS com- mands and programs each time you start the computer. backup: A duplicate copy of files kept as a spare in case the original is destroyed. batch file: A file that can be executed from the system prompt containing a sequence of operating system com- mands or executable files.
Page 262 cache memory cache memory: High speed memory which stores data that increases pro- cessor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
Page 263 communications: The means by which a computer transmits and receives data to and from another com- puter or device. See parallel interface; serial interface. compatibility: 1) The ability of one computer to accept and process data in the same manner as another computer without modifying the data or the media upon which it is being trans- ferred.
Page 264 delete delete: To remove data from a disk or other data storage device. Synonymous with erase. device driver: A program that con- trols communication between a spe- cific peripheral device and the computer. The CONFIG.SYS file con- tains device drivers that MS-DOS loads when you turn the computer on.
Page 265 escape: 1) A code (ASCII code 27), signaling the computer that what fol- lows are commands; used with periph- eral devices such as printers and modems. 2) A means of aborting the task currently in progress. escape guard time: A time before and after an escape code is sent to the modem which distinguishes between escapes that are part of the transmitted...
Page 266 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
Page 267 KB: See kilobyte. keyboard: An input device contain- ing switches that are activated by man- ually pressing marked keys. Each keystroke activates a switch that trans- mits a specific code to the computer. For each key, the transmitted code is, in turn, representative of the (ASCII) character marked on the key.
Page 268 monitor monitor: A device that uses rows and columns of pixels to display alphanu- meric characters or graphic images. See CRT. motherboard: A name sometimes used to refer to the main printed circuit board in processing equipment. It usu- ally contains integrated circuits that perform the processor’s basic func- tions and provides connectors for add- ing other boards that perform special...
Page 269 A Class A device is suffi- cient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B com- puting device regulations. Random Access Memory (RAM):...
Page 270 restart restart: Resetting a computer without turning it off (also called ‘warm boot’ or ‘soft reset’). To restart the computer, press CTRL + ALT + DEL while the computer is on. See also boot. RCA jack: A single-pin connector that carries composite video signals, which include both contrast and color information.
Page 271 S-video: This connection provides separate lines for contrast and color, which produces a video image superior to that produced by a composite con- nection. See also RCA jack. synchronous: Having a constant time interval between successive bits, char- acters or events. system disk: A disk that has been for- matted with an operating system.
Page 272 Glossary-14 User’s Manual...
Page 273: Index
Index 1-8, 2-7 AC adaptor DC IN 15V port 1-17, 8-10 additional connecting ASCII characters Auto power on, See Power Battery pack 8-10 additional location 6-14 replacing Battery, See also Battery pack charging 6-13 extending life 2-12, 6-3 indicator 6-11 monitoring capacity real time clock safety precautions...
Page 274 Index FN Sticky key Function keys Hard disk drive 1-11 automatic power off problems HD DVD-ROM drive 4-35 using 1-12, 5-4 Hibernation 9-24 problems 1-11, 5-3 Hot keys brightness down brightness up hibernation instant security lock computer mode output power plan sleep touch pad wireless...
Page 275 9-24 sleep sound system support from TOSHIBA TV output signal 9-22 Wireless LAN Processor 6-16 Real time clock battery, See Battery Recovery Media ScrLock (FN + F12), See Soft keys SD/SDHC/MS/MS Pro/MMC/xD card...
Page 276 Index 9-21 problems 2-10 speaker volume control 1-13 TOSHIBA Power Saver 8-12 Utilities 1-13 list 2-3, 2-6 location 9-22 problems Video modes, Appendix B Video RAM 1-8, 2-4 Video-out jack Volume control, See Sound system Wireless LAN 4-53 using Index-4...

This manual is also suitable for:

Satellite pro a210

Toshiba Satellite A210 User Manual

Manual Contents

Conventions

General Precautions

Creating a Computer-Friendly Environment

Stress Injury

Heat Injury

Pressure or Impact Damage

Express Card Overheating

Mobile Phone

Instruction Manual for Safety and Comfort

Chapter 1 Introduction

Equipment Checklist

Features

Special Features

TOSHIBA Value Added Package

Utilities and Application

Options

Chapter 2 The Grand Tour

Front with the Display Closed

Left Side

Right Side

Back Side

Underside

Front with the Display Open

Optical Disc Drive

Remote Controller

Installing/Removing Batteries

AC Adaptor

Chapter 3 Getting Started

Connecting the AC Adaptor

Opening the Display

Turning on the Power

Starting up for the First Time

Turning off the Power

Restarting the Computer

System Recovery Options

Create Optical Recovery Discs

Restoring the Preinstalled Software from the Recovery HDD

Restoring the Preinstalled Software from Your Creating Recovery Media

Chapter 4 Operating Basics

Using the Touch Pad/Dual Mode Pad

Dual Mode Pad Button Function

Using the Fingerprint Sensor

Using Optical Disc Drives

Using TOSHIBA HD DVD PLAYER to Enjoy HD Dvds

Using TOSHIBA HD DVD PLAYER

Using the Computer in Place of an HD DVD Player

Display Compatibility

Writing Cds on CD-RW/DVD-ROM Drive

Writing CD/Dvds on DVD Super Multi (+-R DL) Drive

Writing CD/DVD/HD Dvds on HD DVD-R Drives

Media Care

Using the Microphone

Modem

Wireless Communications

Lan

Moving the Computer

Cleaning the Computer

Heat Dispersal

Chapter 5 The Keyboard

Typewriter Keys

F1 ... F12 Function Keys

Soft Keys: FN Key Combinations

Windows Special Keys

Keypad Overlay

Generating ASCII Characters

Chapter 6 Power and Power-Up Modes

Power Conditions

Power Indicators

Battery Types

Care and Use of the Battery Pack

Replacing the Battery Pack

Starting the Computer by Password

Chapter 7 HW Setup and Passwords

HW Setup

Chapter 8 Optional Devices

Express Card

Multiple Digital Media Card Slot

Memory Expansion