Toro Greensmaster 1000 Operator's Manual page 2
Hide thumbs
Also See for Greensmaster 1000:
- Operator's manual (44 pages) ,
- Operator's manual (32 pages) ,
- Operator's manual (40 pages)
Table of Contents
Advertisement
This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order, or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
Operating this machine 1,500 m (5,000 ft) above
sea level requires a high-altitude jet. Refer to your
Honda engine owner's manual.
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This machine is a walk-behind, reel-blade lawn mower
intended to be used by professional, hired operators
in commercial applications. It is primarily designed
for cutting grass on well-maintained turf. Using this
product for purposes other than its intended use could
prove dangerous to you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit www.Toro.com for product safety and operation
training materials, accessory information, help finding
a dealer, or to register your product.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Whenever you need service, genuine Toro parts, or
additional information, contact an authorized Toro
distributor and have the model and serial numbers of
your product ready. The model and serial numbers
are located on a plate on the rear frame. Write the
numbers in the space provided.
Important:
With your mobile device, you can
scan the QR code (if equipped) on the serial
number decal to access warranty, parts, and other
product information.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
Figure 1
Figure 2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
g235302
g000502
Hide quick links:
Advertisement
Table of Contents
